John Deere LW11 Series In-Line Bale Wrapper
Hay Equipment
Your Preferred Location
Features
-
Bale Capacity: 5 ft. 6 in. (1.7 m) round
-
Wrapping Capacity: 120 bales / hr
-
Power: 13 hp (9.7 kW)
Specifications
Bale capacity - Round bale diameter: |
1.7 m 5.5 ft |
Controls - Hydraulic system: |
Self-contained |
Controls - Lift mechanism: |
Hydraulic rear axle rotation |
Controls - Power drive: |
Optional, hydraulic single or dual wheel |
Controls - Steering: |
Hydraulic with optional remote control |
Controls - Type: |
Electric over hydraulic 12 V |
Dimensions - Overall machine height: |
2.7 m 9 ft |
Dimensions - Overall machine length: |
5.5 m 18 ft |
Dimensions - Overall machine shipping length: |
5 m 16.4 ft |
Dimensions - Overall machine width: |
2.7 m 9 ft |
Final bale push off - Bale pusher: |
Self-contained scissor linkage |
Final bale push off - Unloading: |
Manual cross tube |
Hitch - Length: |
Adjustable |
Hitch - Type: |
Folding |
Lighting, marking and safety - Jack: |
Standard |
Lighting, marking and safety - Markings: |
SMV and reflectors |
Lighting, marking and safety - Safety tow chain: |
Standard |
Lighting, marking and safety - Transport safety lights: |
Standard |
Power - Alternator size, amp: |
18 amp |
Power - Engine size: |
9.7 kW 13 hp |
Power - Engine type: |
Honda |
Power - Start type: |
Electric |
Set-up time - Labor hours: |
1 |
Tires - Quantity: |
Four (two front, two rear) |
Tires - Size (front): |
11L-15 Implement |
Tires - Size (rear): |
27x10.5 Traction |
Warranty - Machine: |
1 year |
Weight - Towing unit minimum weight: |
1,511.8 kg 3,333 lb |
Weight - Weight: |
2,268 kg 5,000 lb |
Wrapping - Bale alignment: |
Fixed bale guides |
Wrapping - Bale guide rollers: |
Two standard |
Wrapping - Cycle time: |
Adjustable with limit switches |
Wrapping - Film tensioners: |
Two aluminum rollers: 76.2 cm 30 in. with stretch: 55 percent |
Wrapping - Hoop speed: |
Adjustable flow control valve |
Wrapping - Wrapping capacity: |
120 bales per hour |
Film wrap sensor shuts down wrapping cycle when out of film
Sensor comprised of silver rod and limit switch
The film wrap sensor automatically shuts down the wrapping cycle when the machine runs out of film or breaks.
Light kit for bale wrapper
A conversion kit provides night working lights on LW1166 and LW1266 In-Line Bale Wrappers.
Adjustable tongue (hitch) folds out of way for easy repositioning of unit
Adjustable tongue (hitch)
The adjustable tongue (hitch) folds neatly out of the way for wrapping. It is located at the opposite end of where the bales are wrapped.
The adjustable tongue makes moving and repositioning the machine a quick and easy task, saving time and money.
Traction implement tires great on wet and uneven terrain
Assist in difficult field conditions
Traction implement tires make the in-line wrappers sure-footed on wet and uneven terrain to help get the machine where it needs to be for wrapping bales.
The LW11 Series comes standard with the traction implement tires, and they are available on the LW12 Series only when ordered with single- or dual-power drive.
Control box and levers are control center of machine
Multipurpose control center
The control box and levers are the control center of the in-line bale wrappers.
Some of the uses include turning the unit on and off, and controlling the bale ramp and bale push.
Options available to increase productivity and uptime
14.9-kW (20-hp) Honda® engine
A larger horsepower engine with a high-flow pump provides increased capacity to complete the job faster.
NOTE: LW Series In-Line Bale Wrappers come standard with a 9.7-kW (13-hp) Honda engine.
Single- and dual-power drive
Optional single-power drive
Optional single- or dual-power drives allow the operator to maneuver the unit without attaching it to a tractor. The single-power drive has one rear tire, while the dual-power drive has two rear tires, to provide traction for the unit. These features are great for wet or uneven ground conditions where traction is limited.
Steering remote control
Remotely stops and starts the unit
This remote control allows the operator to steer, start, and stop the machine without using the control panel on the machine.
Twin wrap kit
Twin wrap kit
This kit provides a double layer of wrap, increasing the amount of wrap applied to the bales.
Bale follower
The bale follower allows the in-line wrapper to automatically follow the line of bales next to it.
Work lights
Lights allow operators to work longer hours
For early morning or late-night work, choose between two optional work lights: light-emitting diode (LED) and halogen.
Honda is a trademark of Honda Motor Co., Ltd.
Wheel conversion kits for LW11 and LW12 Bale Wrappers
The first kit listed is a dual-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. Dual drive improves traction in wet and slick conditions.
The second kit listed is a single-wheel hydraulic power drive conversion kit that allows the wrapper to be driven and powered by its own hydraulic system. One rear tire is hydraulically driven.
Remote steering and shutdown conversion kits for LW11 and LW12 Bale Wrappers
Remote steering and shutdown conversion kits allow the operator to steer and start/stop the wrapper from the operator station of the tractor or from the skid steer that is loading the bales into the wrapper.
Bale push is integrated into machine
Optional bale push-off arm
Operator needs to extend arm
The bale push moves the bale to the back of the bale wrapper. From this point, the operator can utilize the optional bale push-off arm to finish the process. The operator moves a lever to extend the arm, and the arm pushes the bale off onto the ground.