John Deere H120 Loader
Front End Loaders for Tractors
Your Preferred Location
Specifications
Key Specs - Boom breakout force: |
Measured at pivot (Y) 782 kg 1725 lb Measured at 500 mm ahead of pivot (Z) 595 kg 1311 lb |
Key Specs - Bucket rollback force capacity: |
At ground-level line (ZZ) 867 kg 1911 lb |
Key Specs - Clearance at full height - bucket dumped (C): |
1371 mm 54 in. |
Key Specs - Dump angle, degrees (E): |
-40.1 degree (angle) |
Key Specs - Lift capacity at full height: |
Measured at pivot (U) 319 kg 703 lb Measured at 500 mm ahead of pivot (V) 232 kg 512 lb |
Key Specs - Maximum lift height (A): |
1809 mm 71.2 in. |
Key Specs - Rollback angle, degrees (G): |
31.2 degree (angle) |
Loader - Base weight: |
246.1 kg |
Loader - Boom breakout force: |
Measured at pivot (Y) 782 kg 1725 lb Measured at 500 mm ahead of pivot (Z) 595 kg 1311 lb |
Loader - Bucket angle: |
Dump angle, degrees (E) -40.1 degree (angle) Rollback angle, degrees (G) 31.2 degree (angle) Dump angle, ground -114 degree (angle) |
Loader - Bucket rollback force capacity: |
At maximum height (VV) 763 kg 1682 lb At 59-in. (1500-mm) lift height (XX) 789 kg 1739 lb At ground-level line (ZZ) 867 kg 1911 lb |
Loader - Bucket used: |
Pin On Materials 1250 mm 49 in. |
Loader - Bucket weight: |
70 kg 155 lb |
Loader - Cycle times: |
Loader raise, seconds 4 seconds Loader lower, seconds 2.5 seconds Bucket dump, seconds 5.7 (without regen)/2.2 (with regen) seconds Bucket rollback, seconds 3.5 seconds |
Loader - Digging depth (H): |
-101 mm -4 in. |
Loader - Dimensions: |
Maximum lift height (A) 1809 mm 71.2 in. At full height - bucket level(B) 1653 mm 65.1 in. At full height - bucket dumped (C) 1371 mm 54 in. |
Loader - Lift capacity at 59 in. (1500 mm): |
Measured at pivot (W) 331 kg 729 lb Measured at 500 mm ahead of pivot (X) 262 kg 578 lb |
Loader - Lift capacity at full height: |
Measured at pivot (U) 319 kg 703 lb Measured at 500 mm ahead of pivot (V) 232 kg 512 lb |
Loader - Overall length (I+F), ft (m): |
2.6 m 8.6 ft |
Loader - Reach: |
At maximum height (D) 571 mm 22.5 in. At ground level - bucket level (F) 1176 mm 46.3 in. |
Tractor - Front tire: |
18x8.5-10 4PR R4 |
Tractor - Model: |
1025R/1023E/1026R Tractor |
Tractor - Pump capacity: |
3.5 gpm |
Tractor - Rated pressure: |
1987 psi |
Tractor - Rear tire: |
26x12.00-12 4PR R4 |
Tractor - Wheelbase: |
1450 mm 57 in. |
Easily remove and mount loader to and from the tractor without tools
Quik-Park™ loader mounting system
The Quik-Park mounting system on the H120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the H130 and former 200CX Loaders, the H120’s parking stand is attached to the mast. To lower it into the park position, simply move the joystick to the raise position once the latches are opened.
To view a video of how the Quik-Park™ system works click here.
NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.
Easy removal and mounting (shown on a noncurrent 1026R)
Mount to and from the tractor without tools
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.