John Deere 300E Loader
Front End Loaders for Tractors
Your Preferred Location
Features
-
Lift Capacity: 845 lbs (384 kg)
-
Lift Height: 84 in. (2132 mm)
Specifications
Key Specs - Boom breakout force: |
Measured at pivot (Y) 760 kg 1704 lb Measured at 500 mm ahead of pivot (Z) 537 kg 1204 lb |
Key Specs - Bucket rollback force capacity: |
At ground-level line (ZZ) 634 kg 1422 lb |
Key Specs - Clearance at full height - bucket dumped (C): |
1596 mm 63 in. |
Key Specs - Dump angle, degrees (E): |
43.8 degree (angle) |
Key Specs - Lift capacity at full height: |
Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb |
Key Specs - Maximum lift height (A): |
2140 mm 84 in. |
Key Specs - Rollback angle, degrees (G): |
31.4 degree (angle) |
Loader - Base weight: |
306.4 kg |
Loader - Boom breakout force: |
Measured at pivot (Y) 760 kg 1704 lb Measured at 500 mm ahead of pivot (Z) 537 kg 1204 lb |
Loader - Bucket angle: |
Dump angle, degrees (E) 43.8 degree (angle) Rollback angle, degrees (G) 31.4 degree (angle) Dump angle, ground 122 degree (angle) |
Loader - Bucket rollback force capacity: |
At maximum height (VV) 639 kg 1433 lb At 59-in. (1500-mm) lift height (XX) 809 kg 1814 lb At ground-level line (ZZ) 634 kg 1422 lb |
Loader - Bucket used: |
Materials - 1550 mm |
Loader - Bucket weight: |
93 kg 205 lb |
Loader - Cycle times: |
Loader raise, seconds 3.31 seconds Loader lower, seconds 2.75 seconds Bucket dump, seconds 1.75 seconds Bucket rollback, seconds 1.88 seconds |
Loader - Digging depth (H): |
131 mm 5 in. |
Loader - Dimensions: |
Maximum lift height (A) 2140 mm 84 in. At full height - bucket level(B) 1979 mm 78 in. At full height - bucket dumped (C) 1596 mm 63 in. |
Loader - Lift capacity at 59 in. (1500 mm): |
Measured at pivot (W) 588 kg 1294 lb Measured at 500 mm ahead of pivot (X) 444 kg 977 lb |
Loader - Lift capacity at full height: |
Measured at pivot (U) 539 kg 1186 lb Measured at 500 mm ahead of pivot (V) 384 kg 845 lb |
Loader - Overall height in carry position (J): |
161 mm 6 in. |
Loader - Overall length (I+F), ft (m): |
2.9 m 9.5 ft |
Loader - Reach: |
At maximum height (D) 603 mm 24 in. At ground level - bucket level (F) 1369 mm 54 in. |
Tractor - Front tire: |
25x8.50-14 4PR R4 |
Tractor - Model: |
3025E, 3032E, 3038E |
Tractor - Pump capacity: |
5.3 gpm |
Tractor - Rated pressure: |
2495 psi |
Tractor - Rear tire: |
15.00-19.5 4PR |
Tractor - Wheelbase: |
1595 mm 62.8 in. |
End-of-pin lubrication - Easy maintenance
End-of-pin lubrication
Closeup of grease fitting
Grease points
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting is not a problem as a sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting.
Quik-Change attachment carrier
Quik-Change attachment carrier
Quik-Change attachment
The Quik-Change attachment carrier allows for fast, easy removal and mounting of attachments without tools
Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader
Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence. With the MSL loader, you will notice:
- Loader implement will maintain position wherever the loader is lifted to
- Increased lift capacities
- Reduction of material lost during operation
- Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement
This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.
300E MSL Loader
Leveling linkage on top of boom and flag pins used in pivot
300E MSL Loader
Parking stand kit
With the BW15872 parking stand kit, the 300E Loader can be quickly and easily removed from the tractor without tools.
Similarly, the BW16127 parking stand kit allows for the 400E Loader to be parked from the tractor.
Instructions for attaching the loader
Instructions for detaching the loader
The kit includes the following:
-
Parking stands
-
Handled pins
-
Hydraulic hoses
-
Quick-couplers
-
Mounting bracket and hardware
Parking stand installed
Quick disconnect connected
Boom pins installed