John Deere 680R Loader
Front End Loaders for Tractors
Your Preferred Location
Features
-
Lift Height: 176 in. (4.48 m)
-
Lift Capacity: 5408 lbs (2453 kg)
Specifications
Key Specs - Boom breakout force: |
Measured at pivot (Y) 3411 kgf 7520 lbf |
Key Specs - Bucket rollback force capacity: |
At ground-level line (ZZ) 4336 kgf 9559 lbf |
Key Specs - Clearance at full height - bucket dumped (C): |
3465 mm 136 in. |
Key Specs - Dump angle, degrees (E): |
60 degree (angle) |
Key Specs - Lift capacity at full height: |
Measured at pivot (U) 2453 kg 5408 lb |
Key Specs - Maximum lift height (A): |
4480 mm 176 in. |
Key Specs - Rollback angle, degrees (G): |
48 degree (angle) |
Loader - Base weight: |
1808.2 kg |
Loader - Boom breakout force: |
Measured at pivot (Y) 3411 kgf 7520 lbf Measured at 800 mm ahead of pivot (Z) 3001 kgf 6616 lbf |
Loader - Bucket angle: |
Dump angle, degrees (E) 60 degree (angle) Rollback angle, degrees (G) 48 degree (angle) Dump angle, ground 117 degree (angle) |
Loader - Bucket rollback force capacity: |
At maximum height (VV) 3117 kgf 6872 lbf At 59-in. (1500-mm) lift height (XX) 4486 kgf 9890 lbf At ground-level line (ZZ) 4336 kgf 9559 lbf |
Loader - Bucket used: |
Heavy-duty grapple 2450 mm Heavy-duty grapple 96 in. |
Loader - Bucket weight: |
375 kg 826 lb |
Loader - Cycle times: |
Loader raise, seconds 4.19 seconds Loader lower, seconds 2.89 seconds Bucket dump, seconds 1.81 seconds Bucket rollback, seconds 1.81 seconds |
Loader - Digging depth (H): |
96 mm 5 in. |
Loader - Dimensions: |
Maximum lift height (A) 4480 mm 176 in. At full height - bucket level(B) 4240 mm 167 in. At full height - bucket dumped (C) 3465 mm 136 in. |
Loader - Leveling configuration: |
Mechanical Self Leveling (MSL) |
Loader - Lift capacity at 59 in. (1500 mm): |
Measured at pivot (W) 2989 kg 6590 lb Measured at 800 mm ahead of pivot (X) 2821 kg 6219 lb |
Loader - Lift capacity at full height: |
Measured at pivot (U) 2453 kg 5408 lb Measured at 800 mm ahead of pivot (V) 2431 kg 5359 lb |
Loader - Overall length (I+F), ft (m): |
5.5 m 17.9 ft |
Loader - Reach: |
At maximum height (D) 1346 mm 53 in. At ground level - bucket level (F) 2931 mm 115 in. |
Tractor - Front axle configuration: |
MFWD |
Tractor - Front tire: |
600/70R28 |
Tractor - Model: |
6175R/M, 6195R/M, 6215R |
Tractor - Pump capacity: |
114 L/min 30.1 gpm |
Tractor - Rated pressure: |
200 bar 2900 psi |
Tractor - Rear tire: |
650/85R38 |
Tractor - Wheelbase: |
2800 mm 110 in. |
Improve appearance and reduce damage with concealed oil lines
600R Loader with concealed oil lines
The R-Series Loaders have been redesigned to route the oil lines and hydraulic lines through the boom arm and the torque tube. This internal routing ensures better protection of the lines from external damage and improves the overall appearance of the loader.
600R Loader (side view)
600R Loader (angle view)
Faster cycle time for mechanical self-leveling (MSL) Loaders using false rod cylinders
600R Loader working with 6120M Tractor
The MSL R-Series Loaders utilize a false rod cylinder to improve bucket performance. This bucket cylinder is designed with a smaller displacement of oil required on the head end of the cylinder, which allows the cylinder to function more quickly, decreasing operation cycle time. With the false rod cylinder design, loader applications can work more quickly and efficiently.
False rod cylinders on 600R Loader
Easy service with boom lockout
Hydraulic shut-off valve on R-Series Loader
The R-Series Loaders come equipped with a hydraulic shut-off valve to improve servicabiity. When conducting brief service to the loader, close the hydraulic shut-off valve to ensure the loader does not move while operating under the equipment. This feature promotes a safe way to conduct brief maintenance without having to use support stands or removing the loader completely.
Save time with single-point hydraulic connection
Single-point hydraulic connection on the 600R Loader
The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.
NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.
Single-point hydraulic connection (open)
Single-point hydraulic connection (closed)
Easy loader removal using automatic mast latch
Rear view of 600R Loader
R-Series Loaders are even easier to attach and detach due to the automatic mast latch system. This feature provides efficiency to operations that require frequent loader parking. The automatic mast latch system is a mechanical lever that allows operators to remove or attach the loader with one trip out of the cab. The ease and convenience provided by the automatic mast latch system provides improvement to operation uptime.
Automatic mast latch lever
Visual lock/unlock indicator
Further improve productivity with loader options
600R Loader on a 6120M Tractor
The R-Series Loaders provide several options to enhance operator experience and productivity in the field. Individual options can be ordered to fit an operation’s unique set of needs. Some of the available loader options include:
- Loader lights for enhanced visibility
- Hydraulic remote implement latch improves uptime
- Return-to-Position (RTP) Gen 2 with electronic self-leveling (ESL)
- Loader suspension system for a smoother ride
Loader lights for enhanced visibility
600R Loader with light-emitting diode (LED) lights
To further enhance visibility, the 600R Loader has the option to include LED lights. With LED lights mounted onto each side of the loader boom, performing loader applications in variable operating conditions is made easier. Pairing the loader LED light option with an LED light package on the 6110M or 6120M Tractor will provide unmatched visibility to enhance operator experience during any task.
Hydraulic remote implement latch improves uptime
Two-button activation for hydraulic remote implement latch
The hydraulic remote implement latch allows implements to be changed quickly and efficiently. An operator can activate the device from the cab by simultaneously pressing the two buttons installed on the right-hand side of the operator’s station. Switching from one attachment to the next can now be accomplished quickly with limited movements of the loader and without leaving the operator’s seat.
Return-to-Position (RTP) Gen 2 with electronic self-leveling (ESL)
Electronic loader joystick
The second generation of industry-exclusive RTP Gen 2 with ESL provides a practical solution for operators with daily, repetitive, material handling needs. RTP allows the operator to set different position points for the loader with the flick of the wrist, activating the detent in electronic joysticks. With the second generation of RTP, operators can set application profiles rather than entering position points each time an application is in use. RTP Gen 2 with ESL removes repetition and fatigue from loader applications.
Loader suspension system for a smoother ride
600R Loader working with a 5100R Tractor
The loader suspension system improves operator comfort and loader efficiency during loader operation. This system is easily activated by the operator from the cab. When activated, the loader suspension system absorbs the shock providing a smoother ride in the cab as well as reducing material loss from the bucket.