Kuhn VK Series
Kuhn Shredders
Your Preferred Location
Links
Low-Profile Hood
These shredders have a hood without protrusions, screw heads, or sharp angles to catch on trellis lines or low lying branches. The reduced hood height allows the VK shredder to slide under even the lowest wires without damaging vines, plants or trees.
Hammer Knives and Counter Knives
Hammer knives allow shredding of up to a 2” diameter brush. To achieve fine shredding, use the counter knives (one straight and two notched) to make sure residues are cut.
Offset Capability
VK shredders are fitted with mechanically controlled offset to allow work under trees and to adapt the working width to the tractor width. The center of gravity of the machine remains close to the tractor resulting in a balanced tractor/machine and preventing lifting problems.
Roller or Semi-Pivoting Wheels
Height is controlled via a roller or semi-pivoting wheels. The roller is fitted with removable ends as standard, so that you can carry out any necessary maintenance or repair quickly and easily at reduced costs.
Collecting Rake
The rear collecting rake, available as an option, lifts up residues and vine shoots which are pressed down to the ground and need to be shredded. The roller guides keep it stable on uneven or damp ground. For greater machine stability, you can add skids or a roller.
SPECIFICATIONS
| VK 95 | VK 115 | VK 135 | VKD 155 | |
|---|---|---|---|---|
| Working width | 38" (0.98 m) | 45" (1.14 m) | 53" (1.35 m) | 61" (1.55 m) |
| Overall width | 42" (1.07 m) | 49" (1.24 m) | 57" (1.45) | 65" (1.65 m) |
| Number of hammer knives | 10 | 12 | 14 | 16 |
| Progressive offset to the right | 4" (10 cm) mechanical | 7" (18 cm) mechanical | 8" (20 cm) mechanical | 14" (36 cm) hydraulic |
| PTO speed | 540 | 540 | 540 | 540 |
| Minimum PTO power requirement | 20 hp (15 kW) | 30 hp (22 kW) | 35 hp (26 kW) | 40 hp (30 kW) |
| Maximum PTO power | 40 hp (30 kW) | 45 hp (34 kW) | 50 hp (37 kW) | 55 hp (41 kW) |
| Maximum diameter of prunings or brush | 2" (5.1 cm) | 2" (5.1 cm) | 2" (5.1 cm) | 2" (5 cm) |
| Hitch type | Cat. 1 or 2, 3-point mount | Cat. 1 or 2, 3-point mount | Cat. 1 or 2, 3-point mount | Cat. 1 or 2, 3-point mount |
| Gearbox with integrated overrunning clutch | Standard | Standard | Standard | Standard |
| Machine net weight approx. with roller | 640 lbs (290 kg) | 727 lbs (330 kg) | 805 lbs (365 kg) | 1,124 lbs (510 kg) |