Skip Navigation.

Sloan Implement

217-226-4411

Kuhn BV Series

Kuhn Shredders

Your Preferred Location

The KUHN BV 10 and 100 Series shredders finely shred grass, vine shoots and prunings. Heavy-duty gearboxes and new PowerQuad IV belt drive offer outstanding power transmission for tractors up to 90 hp. Larger hood openings allow larger amounts of prunings and residue between 2” to 3” in diameter to be efficiently processed by the rotor. The rotor is equipped with redesigned heavy-duty hammer knives and three rows of counterknives, an industry-leading feature, in the hood. KUHN shredders offer a wide range of optional features, so they are adaptable to meet any operation’s needs.

Downloads & Documentation
Details

Main Gearbox & Rotor Drive

All BV shredders utilize simple 540 rpm PTO drive. BV 10 models have been rated for tractors up to 90 hp while BV 100 models have been rated for tractors up to 110 hp. A shaft transmits power from the main gearbox to the new PowerQuad IV rotor drive belts. These belts are designed to provide reliable service with minimal maintenance. Three or four belts are utilized depending on the model.

Rear Roller

The rear roller features removable ends, allowing a bearing to be replaced without having to replace the entire roller. It also features multiple height adjustments that leave the optimal grass height in a variety of situations. In addition to the height adjustment capability, forward and rearward positions are possible.

Large Hood Opening

Depending on the series, the hood opening stands from 11.4” to 12.6”. These large clearances increase throughput with easy feeding of branches and prunings, especially in windrows.

Low Profile

These shredders have a hood without protrusions, screw heads, or sharp angles to catch on trellis lines or low-hanging branches. The reduced hood height allows the BV shredders to slide under even the lowest of wires without damaging the vines or the trellises.

Side Shift Capability

All BV 100 Series models feature mechanical side shift capability as standard. This allows the operator to offset the unit relative to the tractor for shredding underneath plants or other overhanging obstructions. Only available on BV 100 Series shredders

Hammer Knives

The hammer knives power through clippings and brush. They feature a curved back to reduce damage to the rotor if a hard obstacle is struck. The specially designed retaining pins maintain a firm hold on the knives year after year.

Counterknives

In addition to the hammer knives, there are also an industry-leading three rows of counterknives inside the hood of each BV series shredder. Counterknives help provide fine processing of material for quick decomposition.

Downloads & Documentation
Links
- Downloads
Details

Main Gearbox & Rotor Drive

All BV shredders utilize simple 540 rpm PTO drive. BV 10 models have been rated for tractors up to 90 hp while BV 100 models have been rated for tractors up to 110 hp. A shaft transmits power from the main gearbox to the new PowerQuad IV rotor drive belts. These belts are designed to provide reliable service with minimal maintenance. Three or four belts are utilized depending on the model.

Rear Roller

The rear roller features removable ends, allowing a bearing to be replaced without having to replace the entire roller. It also features multiple height adjustments that leave the optimal grass height in a variety of situations. In addition to the height adjustment capability, forward and rearward positions are possible.

Large Hood Opening

Depending on the series, the hood opening stands from 11.4” to 12.6”. These large clearances increase throughput with easy feeding of branches and prunings, especially in windrows.

Low Profile

These shredders have a hood without protrusions, screw heads, or sharp angles to catch on trellis lines or low-hanging branches. The reduced hood height allows the BV shredders to slide under even the lowest of wires without damaging the vines or the trellises.

Side Shift Capability

All BV 100 Series models feature mechanical side shift capability as standard. This allows the operator to offset the unit relative to the tractor for shredding underneath plants or other overhanging obstructions. Only available on BV 100 Series shredders

Hammer Knives

The hammer knives power through clippings and brush. They feature a curved back to reduce damage to the rotor if a hard obstacle is struck. The specially designed retaining pins maintain a firm hold on the knives year after year.

Counterknives

In addition to the hammer knives, there are also an industry-leading three rows of counterknives inside the hood of each BV series shredder. Counterknives help provide fine processing of material for quick decomposition.

Other Kuhn Shredders Models

Request A Quote

First Name *

Last Name *

Phone Number *

Email *

Company

Zip Code *

Location *

Equipment Category

Specific Model

Comments

Contact

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Comments

Request a Part

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Model *

Stock Number of Part

Comments

Consignment

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State/Province

Zip Code *

Country

Product *

Serial Number of Equipment

Hours On Equipment

Comments

Request a Service

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Type Of Equipment

Model Number

Description of Problem

Request A Rental

First Name *

Last Name *

Phone Number *

Email *

Company

Address

City

State

Zip Code*

Equipment Category

Specific Model

Comments

Simple Contact Form

First Name *

Last Name *

Please provide either a phone number OR an email

Phone Number *

Email *

Comments

Submit Application

First Name*

Last Name*

Email Address*

Phone Number*

Street

City

State

Zip Code*

Optional Message

Upload your resume

First Name *

Last Name *

Phone Number *

Email Address *

Location *

Year *

Make *

Model *

Hours

Serial Number

Rate the Quality/Condition of Your Machine

Additional Specs/Description

New Purchase

Change Your Preferred Location

Atwood, IL

Select Location

Assumption, IL

Select Location

Bloomington, WI

Select Location

Carlinville, IL

Select Location

Cuba City, WI

Select Location

Effingham, IL

Select Location

Fulton, IL

Select Location

Hamel, IL

Select Location

Havana, IL

Select Location

Lanark, IL

Select Location

Litchfield, IL

Select Location

Monroe, WI

Select Location

Montfort, WI

Select Location

Mt. Horeb, WI

Select Location

Perry, IL

Select Location

Petersburg, IL

Select Location

Shelbyville, IL

Select Location

Taylorville, IL

Select Location

Vandalia, IL

Select Location

Virden, IL

Select Location

White Hall, IL

Select Location

Winchester, IL

Select Location

Mattoon, IL

Select Location

Casey, IL

Select Location

Newton, IL

Select Location

Vincennes, IN

Select Location

Sloan Implement

217-226-4411

Assumption, IL Change location

217-226-4411

217-226-4411

Kuhn BV Series

Kuhn Shredders

Your Preferred Location

Links

Main Gearbox & Rotor Drive

Rear Roller

Large Hood Opening

Low Profile

Side Shift Capability

Hammer Knives

Counterknives

Links

Main Gearbox & Rotor Drive

Rear Roller

Large Hood Opening

Low Profile

Side Shift Capability

Hammer Knives

Counterknives

Other Kuhn Shredders Models

Request A Quote

Contact

Contact

Request a Part

Consignment

Request a Service

Request A Rental

Search Alert

Simple Contact Form

Submit Application

Change Your Preferred Location