New John Deere 730 | Sloan Implement
730 Air Disk Drill
  • Double-disk openers offer precise depth
  • Three tool widths and two seed row spacings
  • Field Doc™ and Map-Based Prescriptions
  • Additional operators manuals and decal kit

Features

  • Opener: Double-disk openers

  • Fertilizer Placement: In Furrow

  • Working Width: 28 ft., 36 ft., 44 ft.

  • Row Spacing: 6 in. (15-cm) 7.5 in. (19-cm)

  • Transport Width: 16 ft. 3 in., 19 ft.

Specifications

Clearance - Between ranks range:
29 to 41-in. (73.7 to 104 cm)
Clearance - Fore-and-aft:
134 in.
3.51 m
Clearance - Hydraulics:
active hydraulic downpressure
Clearance - Underframe clearance:
24.1 in.
60.9 cm
Freight - Shipping location:
Des Moines, IA
Harrow - Attachment:
Rolling Basket with 1-bar harrow
Harrow - Type:
Tine tooth
Key Specs - Harrow - Attachment:
Rolling Basket with 1-bar harrow
Key Specs - Harrow - Type:
Tine tooth
Key Specs - Mainframe - Centerframe width:
11-ft. 8-in.
3.56 m
Key Specs - Mainframe - Wing flexibility:
11 degrees up, 9 degrees down
Key Specs - Number of ranks:
4 ranks of c-shanks,1 rank seed openers
Key Specs - Number of sections:
3
Key Specs - Opener - Type:
Double disk
Key Specs - Seeding tool depth control - Range:
1/4 inch increments
Key Specs - Underframe clearance:
24 in.
60.9 cm
Key Specs - Working widths:
28 ft
8.7 m
Mainframe - Centerframe width:
3.56 m
11-ft. 8-in.
Mainframe - Cross tubes:
4x4-in. (102x102 mm)
Mainframe - End tubes:
2x5-in. (50x127 mm)
Mainframe - Folding:
over-center
Mainframe - Hitch (tubular steel):
6x10-in. (76x152 mm)
Mainframe - Rockshaft:
5.5 x 0.312-in.
140 x 7.92 mm
Mainframe - Size:
28 ft
8.7 m
Mainframe - Type:
3-section drawn flexible
Mainframe - Wing flexibility:
11 degrees up, 9 degrees down
Opener - Boot:
aluminum
Opener - Down pressure:
Opener down pressure: 105 lb./opener
Press wheel down pressure: 65 lb. at 1500 psi
Opener - Penetration force:
Patented Active Hydraulic
Opener - Quantity:
46 on 7.5-in. spacing
56 on 6-in. spacing
Opener - Size:
13.5-in. (343 mm) with 0.25-in. (6 mm) offset
Opener - Spacing:
6-in. (15.2 cm) or
7.5-in. (19.1 cm)
Opener - Type:
Double disk
Seeding tool depth control - Range:
1/4 inch increments
Seeding tool depth control - Type:
On individual openers
Shanks - Arc:
47 degree
Shanks - Finishing tool:
double bar harrow or rolling basket with single bar harrow
Shanks - Quantity:
37
Shanks - Size:
3/4 x 1-3/4 x 24-in.
19 x 44 x 610 mm
Shanks - Spacing:
9 in.
22.8 cm
Shanks - Trip clearance:
10 in.
25.4 cm
Shanks - Trip force:
200 lb
890 N
Shanks - Type:
Tru-Position
Sizes - Number of ranks:
4 ranks of c-shanks,1 rank seed openers
Sizes - Number of sections:
3
Sizes - Working widths:
8.53 m
28 ft
Tires - Castering stabilizer:
(2) 7.60x15 8 PR
Tires - Centerframe; standard:
(4) 11Lx15 Load Range D walk-over tandems
Tires - Gauge wheels, wing:
2-7.60x15 8PR
Tires - Wing; standard:
(4) 9.5Lx15 Load Range D walk-over tandems
Tractor hydraulic requirements - Minimum SCVs:
2 SCVs
Transport position - Height:
Maximum height: 12-ft. 9.3-in (3.90 m)
Minimum height: 11-ft. 4.3-in (3.46 m)
Transport position - Transport clearance:
With sweep extenders: 16.26-in. (413 mm)
Without sweep extenders: 17.26-in. (438 mm)
Transport position - Width:
16-ft. 3.6-in. (4.97 m)
Warning lights - Standard:
Yes

730 Level-Lift™ frame handles moderate residue with faster working speeds and consistent depth control

730 Level-Lift tilling, fertilizing, and seeding 730 Level-Lift tilling, fertilizing, and seeding
#

The 730 Level-Lift Air Disk Drill frame is very similar to the 2210 Level-Lift Field Cultivator. The 730 LL Air Disk Drill is a secondary tillage and seeding tool, an industry exclusive from John Deere. This frame is designed to offer durable support for the double disk openers while providing flexibility over level to gently rolling terrain.

 

Frame components include:

  • Front-mounted rockshaft
  • Tube-Thru-Tube frame
  • Hose and wiring harness support and protection  

Faster working speeds and consistent depth are results of the above features.

 

The 730 Level-Lift frames are:

  • Constructed of continuous five-bar Tube-Thru-Tube frame
  • 10.2-cm x 10.2-cm (4-in. x 4-in.) cross members
  • 7.6-cm x 15.2-cm (3-in. x 6-in.) centerframe hitch tubes
  • 5-cm x 12.7-cm (2-in. x 5-in.) end tubes 

  
The large frame member sizes, joint welds, and the wheel module placement add to the structural integrity, providing stable, consistent front-to-rear and side-to-side operation.

 

The frame:

  • Is 3.4-m (11.2-ft) deep frame (fore-aft) 
  • Has 61-cm (24-in.) under-frame clearance
  • Can handle residue amounts of up to 40 percent 

The wings flex 7 degree up and down. They fold over center for a compact transport or storage profile.

 

The front-mounted rockshaft:

  • Offers superior front-frame strength for unmatched side-to-side levelness
  • Provides torsional rigidity for the hydraulic system
  • Opens up the frame for true shank placement, improving overall residue flow

The TruPosition™ shanks have a trip force at 90.7 kg (200 lb) and a 25.4-cm (10-in.) trip height.

Integration advantages of Deere tractor, cart, tool and technology

#

To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.

Double-disk openers offer precise depth

Leading edge cuts through moderate residue levels Leading edge cuts through moderate residue levels
Narrow disk angle leaves smooth field finish Narrow disk angle leaves smooth field finish

The 34.3-cm (13.5-in.) diameter double-disk openers are offset to create a narrow furrow for optimal seed placement. They feature aluminum boots and have a long-arm/short-arm stagger for residue clearance. Either 15.2-cm (6-in.) or 19-cm (7.5-in.) row spacing is available.

 

NOTE: 15.2-cm (6-in.) spacing is not recommended for heavy, sticky soils such as the Red River Valley of the North.

 

The 6-mm (1/4-in.) offset creates a leading edge and pinch point that is close to the soil surface for optimal penetration and residue cutting. Alternating of the blades with right and left leading edge prevents side drafting and leaves the field smooth with minimal soil throw.

Manually steer using a simple user interface

Manual guidance Manual guidance
#

Manual guidance allows operators to manually steer by matching the machine icon with the line on the screen or by using the path accuracy indicator at the top of the guidance view screen.

Depth-gauging press wheels give accurate seed placement

Individual press wheel depth adjustment Individual press wheel depth adjustment
#

Depth-gauging press wheels:

  •  Allow quick, easy opener depth control
  •  Assist in controlling furrow depth
  •  Promote positive seed-to-soil contact for good germination
  •  Adjustments can be made from 0 cm (0 in.) to 9 cm (3.5 in.) by increments of 6 mm (1/4 in.)
5-cm x 33-cm (2-in. x 13-in.) press wheels are available on the 730
5-cm x 33-cm (2-in. x 13-in.) press wheel 5-cm x 33-cm (2-in. x 13-in.) press wheel
5-cm x 33-cm (2-in. x 13-in.) press wheel 5-cm x 33-cm (2-in. x 13-in.) press wheel

For 15.2-cm (6-in.) row spacing:

  • 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
    NOTE: 15.2-cm (6-in.) row spacing is not recommended for high-residue conditions or sticky soils like in the Red River Valley of the North.

For 19-cm (7.5-in.) row spacing:

  • 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
  • Features

    Features

    • Opener: Double-disk openers

    • Fertilizer Placement: In Furrow

    • Working Width: 28 ft., 36 ft., 44 ft.

    • Row Spacing: 6 in. (15-cm) 7.5 in. (19-cm)

    • Transport Width: 16 ft. 3 in., 19 ft.

  • Specifications

    Specifications

    Clearance - Between ranks range:
    29 to 41-in. (73.7 to 104 cm)
    Clearance - Fore-and-aft:
    134 in.
    3.51 m
    Clearance - Hydraulics:
    active hydraulic downpressure
    Clearance - Underframe clearance:
    24.1 in.
    60.9 cm
    Freight - Shipping location:
    Des Moines, IA
    Harrow - Attachment:
    Rolling Basket with 1-bar harrow
    Harrow - Type:
    Tine tooth
    Key Specs - Harrow - Attachment:
    Rolling Basket with 1-bar harrow
    Key Specs - Harrow - Type:
    Tine tooth
    Key Specs - Mainframe - Centerframe width:
    11-ft. 8-in.
    3.56 m
    Key Specs - Mainframe - Wing flexibility:
    11 degrees up, 9 degrees down
    Key Specs - Number of ranks:
    4 ranks of c-shanks,1 rank seed openers
    Key Specs - Number of sections:
    3
    Key Specs - Opener - Type:
    Double disk
    Key Specs - Seeding tool depth control - Range:
    1/4 inch increments
    Key Specs - Underframe clearance:
    24 in.
    60.9 cm
    Key Specs - Working widths:
    28 ft
    8.7 m
    Mainframe - Centerframe width:
    3.56 m
    11-ft. 8-in.
    Mainframe - Cross tubes:
    4x4-in. (102x102 mm)
    Mainframe - End tubes:
    2x5-in. (50x127 mm)
    Mainframe - Folding:
    over-center
    Mainframe - Hitch (tubular steel):
    6x10-in. (76x152 mm)
    Mainframe - Rockshaft:
    5.5 x 0.312-in.
    140 x 7.92 mm
    Mainframe - Size:
    28 ft
    8.7 m
    Mainframe - Type:
    3-section drawn flexible
    Mainframe - Wing flexibility:
    11 degrees up, 9 degrees down
    Opener - Boot:
    aluminum
    Opener - Down pressure:
    Opener down pressure: 105 lb./opener
    Press wheel down pressure: 65 lb. at 1500 psi
    Opener - Penetration force:
    Patented Active Hydraulic
    Opener - Quantity:
    46 on 7.5-in. spacing
    56 on 6-in. spacing
    Opener - Size:
    13.5-in. (343 mm) with 0.25-in. (6 mm) offset
    Opener - Spacing:
    6-in. (15.2 cm) or
    7.5-in. (19.1 cm)
    Opener - Type:
    Double disk
    Seeding tool depth control - Range:
    1/4 inch increments
    Seeding tool depth control - Type:
    On individual openers
    Shanks - Arc:
    47 degree
    Shanks - Finishing tool:
    double bar harrow or rolling basket with single bar harrow
    Shanks - Quantity:
    37
    Shanks - Size:
    3/4 x 1-3/4 x 24-in.
    19 x 44 x 610 mm
    Shanks - Spacing:
    9 in.
    22.8 cm
    Shanks - Trip clearance:
    10 in.
    25.4 cm
    Shanks - Trip force:
    200 lb
    890 N
    Shanks - Type:
    Tru-Position
    Sizes - Number of ranks:
    4 ranks of c-shanks,1 rank seed openers
    Sizes - Number of sections:
    3
    Sizes - Working widths:
    8.53 m
    28 ft
    Tires - Castering stabilizer:
    (2) 7.60x15 8 PR
    Tires - Centerframe; standard:
    (4) 11Lx15 Load Range D walk-over tandems
    Tires - Gauge wheels, wing:
    2-7.60x15 8PR
    Tires - Wing; standard:
    (4) 9.5Lx15 Load Range D walk-over tandems
    Tractor hydraulic requirements - Minimum SCVs:
    2 SCVs
    Transport position - Height:
    Maximum height: 12-ft. 9.3-in (3.90 m)
    Minimum height: 11-ft. 4.3-in (3.46 m)
    Transport position - Transport clearance:
    With sweep extenders: 16.26-in. (413 mm)
    Without sweep extenders: 17.26-in. (438 mm)
    Transport position - Width:
    16-ft. 3.6-in. (4.97 m)
    Warning lights - Standard:
    Yes
  • Details

    730 Level-Lift™ frame handles moderate residue with faster working speeds and consistent depth control

    730 Level-Lift tilling, fertilizing, and seeding 730 Level-Lift tilling, fertilizing, and seeding
    #

    The 730 Level-Lift Air Disk Drill frame is very similar to the 2210 Level-Lift Field Cultivator. The 730 LL Air Disk Drill is a secondary tillage and seeding tool, an industry exclusive from John Deere. This frame is designed to offer durable support for the double disk openers while providing flexibility over level to gently rolling terrain.

     

    Frame components include:

    • Front-mounted rockshaft
    • Tube-Thru-Tube frame
    • Hose and wiring harness support and protection  

    Faster working speeds and consistent depth are results of the above features.

     

    The 730 Level-Lift frames are:

    • Constructed of continuous five-bar Tube-Thru-Tube frame
    • 10.2-cm x 10.2-cm (4-in. x 4-in.) cross members
    • 7.6-cm x 15.2-cm (3-in. x 6-in.) centerframe hitch tubes
    • 5-cm x 12.7-cm (2-in. x 5-in.) end tubes 

      
    The large frame member sizes, joint welds, and the wheel module placement add to the structural integrity, providing stable, consistent front-to-rear and side-to-side operation.

     

    The frame:

    • Is 3.4-m (11.2-ft) deep frame (fore-aft) 
    • Has 61-cm (24-in.) under-frame clearance
    • Can handle residue amounts of up to 40 percent 

    The wings flex 7 degree up and down. They fold over center for a compact transport or storage profile.

     

    The front-mounted rockshaft:

    • Offers superior front-frame strength for unmatched side-to-side levelness
    • Provides torsional rigidity for the hydraulic system
    • Opens up the frame for true shank placement, improving overall residue flow

    The TruPosition™ shanks have a trip force at 90.7 kg (200 lb) and a 25.4-cm (10-in.) trip height.

    Integration advantages of Deere tractor, cart, tool and technology

    #

    To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.

    Double-disk openers offer precise depth

    Leading edge cuts through moderate residue levels Leading edge cuts through moderate residue levels
    Narrow disk angle leaves smooth field finish Narrow disk angle leaves smooth field finish

    The 34.3-cm (13.5-in.) diameter double-disk openers are offset to create a narrow furrow for optimal seed placement. They feature aluminum boots and have a long-arm/short-arm stagger for residue clearance. Either 15.2-cm (6-in.) or 19-cm (7.5-in.) row spacing is available.

     

    NOTE: 15.2-cm (6-in.) spacing is not recommended for heavy, sticky soils such as the Red River Valley of the North.

     

    The 6-mm (1/4-in.) offset creates a leading edge and pinch point that is close to the soil surface for optimal penetration and residue cutting. Alternating of the blades with right and left leading edge prevents side drafting and leaves the field smooth with minimal soil throw.

    Manually steer using a simple user interface

    Manual guidance Manual guidance
    #

    Manual guidance allows operators to manually steer by matching the machine icon with the line on the screen or by using the path accuracy indicator at the top of the guidance view screen.

    Depth-gauging press wheels give accurate seed placement

    Individual press wheel depth adjustment Individual press wheel depth adjustment
    #

    Depth-gauging press wheels:

    •  Allow quick, easy opener depth control
    •  Assist in controlling furrow depth
    •  Promote positive seed-to-soil contact for good germination
    •  Adjustments can be made from 0 cm (0 in.) to 9 cm (3.5 in.) by increments of 6 mm (1/4 in.)
    5-cm x 33-cm (2-in. x 13-in.) press wheels are available on the 730
    5-cm x 33-cm (2-in. x 13-in.) press wheel 5-cm x 33-cm (2-in. x 13-in.) press wheel
    5-cm x 33-cm (2-in. x 13-in.) press wheel 5-cm x 33-cm (2-in. x 13-in.) press wheel

    For 15.2-cm (6-in.) row spacing:

    • 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)
      NOTE: 15.2-cm (6-in.) row spacing is not recommended for high-residue conditions or sticky soils like in the Red River Valley of the North.

    For 19-cm (7.5-in.) row spacing:

    • 5-cm (2-in.) x 33-cm (13-in.) (A) (standard equipment)

Related Inventory For Sale

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Sloan Implement Employee Portal