Skip Navigation.

Sloan Implement

217-226-4411

Kuhn TB 211 Series

Offset Mowers

Your Preferred Location

Whether it’s the fight against weeds on field edges or road maintenance – there is a solution available for everyone. In multiple conditions, the KUHN TB 211 Series mowers provide you with versatility. These mowers are also supported by their sturdy design and protection features to avoid damage.

Maintenance mowing has to be done in a variety of environments, but will usually take place in grassy areas with a high chance of hidden foreign objects. The TB series has been designed specifically for these types of operations. These mowers will easily meet your offset mowing needs. The design is suited for hedge work with operating angles from -65° to +90°.

Specifications

Height adjustment by roller with removable ends:	Standard
Hitch type:	Cat. 2, 3-point
Machine net weight, approx. with roller:	1,720 lbs (780 kg)
Maximum PTO power recommended:	110 hp (81 kW)
Minimum PTO power requirement:	70 hp (53 kW)
Number of hammer knives:	28
PTO speed (rpm):	540
Required tractor hydraulic connections:	1 SA and 1 DA
Rotor diameter:	16.5" (42 cm)
Working width:	6'8" (2.03 m)

Oscillating 3-Point Hitch

An oscillating 3-point hitch, with floating or variable pivot on the mowing head allows the mowing head to adapt to mowing conditions dictated by terrain.

Rear Roller

The 6” diameter rear roller provides optimal height control, eliminates ruts in loose soils and provides better clearance over irregular ground.

Non-Stop Safety Spring

When meeting an obstacle, the machine frame is protected by a non-stop spring-loaded safety system. After the obstacle is cleared, the machine will automatically return to working position. Moreover, the mechanical parts which are exposed to impact are all protected and the hood features a bolted 4 mm thick sheet metal lining for increased resistance to impacts and wear.

Frame

Designed for intensive use, the frame of the KUHN TB offset mower is unmatched with its reliability and longevity. This machine includes self-lubricating bushings on all pivot points.

Wide Angle PTO joint

A wide angle PTO joint is standard. This is one of the most important features on the machine, especially if you spend a large amount of time in the field with the machine in a vertical position.

Knife Options

Universal Knives - Offer a more substantial option than the articulated knives when powering through heavier crop. Articulated Universal Knives - Offer more freedom to clear obstructions in grass conditions. Articulated Hammer Knives - Create lift for a clean cut. The shackle allows more freedom to clear obstructions hidden in grass conditions. Pallet-Type Finishing Knives - Create lift for a clean cut. Pallet knives are suitable for use in parks and lawns, or any place that a clean finish is desired. Hammer Knives - Hammer knives are designed for shredding with plenty of lift and extra weight to power through brush up to 2”. Not for use in rocky conditions.

Specifications

Height adjustment by roller with removable ends:	Standard
Hitch type:	Cat. 2, 3-point
Machine net weight, approx. with roller:	1,720 lbs (780 kg)
Maximum PTO power recommended:	110 hp (81 kW)
Minimum PTO power requirement:	70 hp (53 kW)
Number of hammer knives:	28
PTO speed (rpm):	540
Required tractor hydraulic connections:	1 SA and 1 DA
Rotor diameter:	16.5" (42 cm)
Working width:	6'8" (2.03 m)

Downloads & Documentation
Links
- Downloads
Details

Oscillating 3-Point Hitch

An oscillating 3-point hitch, with floating or variable pivot on the mowing head allows the mowing head to adapt to mowing conditions dictated by terrain.

Rear Roller

The 6” diameter rear roller provides optimal height control, eliminates ruts in loose soils and provides better clearance over irregular ground.

Non-Stop Safety Spring

When meeting an obstacle, the machine frame is protected by a non-stop spring-loaded safety system. After the obstacle is cleared, the machine will automatically return to working position. Moreover, the mechanical parts which are exposed to impact are all protected and the hood features a bolted 4 mm thick sheet metal lining for increased resistance to impacts and wear.

Frame

Designed for intensive use, the frame of the KUHN TB offset mower is unmatched with its reliability and longevity. This machine includes self-lubricating bushings on all pivot points.

Wide Angle PTO joint

A wide angle PTO joint is standard. This is one of the most important features on the machine, especially if you spend a large amount of time in the field with the machine in a vertical position.

Knife Options

Universal Knives - Offer a more substantial option than the articulated knives when powering through heavier crop. Articulated Universal Knives - Offer more freedom to clear obstructions in grass conditions. Articulated Hammer Knives - Create lift for a clean cut. The shackle allows more freedom to clear obstructions hidden in grass conditions. Pallet-Type Finishing Knives - Create lift for a clean cut. Pallet knives are suitable for use in parks and lawns, or any place that a clean finish is desired. Hammer Knives - Hammer knives are designed for shredding with plenty of lift and extra weight to power through brush up to 2”. Not for use in rocky conditions.

Other Offset Mowers Models

Request A Quote

First Name *

Last Name *

Phone Number *

Email *

Company

Zip Code *

Location *

Equipment Category

Specific Model

Comments

Contact

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Comments

Request a Part

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Model *

Stock Number of Part

Comments

Consignment

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State/Province

Zip Code *

Country

Product *

Serial Number of Equipment

Hours On Equipment

Comments

Request a Service

First Name *

Last Name *

Company

Phone Number *

Email *

Address

City

State

Zip Code *

Location *

Type Of Equipment

Model Number

Description of Problem

Request A Rental

First Name *

Last Name *

Phone Number *

Email *

Company

Address

City

State

Zip Code*

Equipment Category

Specific Model

Comments

Simple Contact Form

First Name *

Last Name *

Please provide either a phone number OR an email

Phone Number *

Email *

Comments

Submit Application

First Name*

Last Name*

Email Address*

Phone Number*

Street

City

State

Zip Code*

Optional Message

Upload your resume

First Name *

Last Name *

Phone Number *

Email Address *

Location *

Year *

Make *

Model *

Hours

Serial Number

Rate the Quality/Condition of Your Machine

Additional Specs/Description

New Purchase

Change Your Preferred Location

Atwood, IL

Select Location

Assumption, IL

Select Location

Bloomington, WI

Select Location

Carlinville, IL

Select Location

Cuba City, WI

Select Location

Effingham, IL

Select Location

Fulton, IL

Select Location

Hamel, IL

Select Location

Havana, IL

Select Location

Lanark, IL

Select Location

Litchfield, IL

Select Location

Monroe, WI

Select Location

Montfort, WI

Select Location

Mt. Horeb, WI

Select Location

Perry, IL

Select Location

Petersburg, IL

Select Location

Shelbyville, IL

Select Location

Taylorville, IL

Select Location

Vandalia, IL

Select Location

Virden, IL

Select Location

White Hall, IL

Select Location

Winchester, IL

Select Location

Mattoon, IL

Select Location

Casey, IL

Select Location

Newton, IL

Select Location

Vincennes, IN

Select Location

Sloan Implement

217-226-4411

Kuhn TB 211 Series

Offset Mowers

Your Preferred Location

Specifications

Height adjustment by roller with removable ends:

Hitch type:

Machine net weight, approx. with roller:

Maximum PTO power recommended:

Minimum PTO power requirement:

Number of hammer knives:

PTO speed (rpm):

Required tractor hydraulic connections:

Rotor diameter:

Working width:

Links

Oscillating 3-Point Hitch

Rear Roller

Non-Stop Safety Spring

Frame

Wide Angle PTO joint

Knife Options

Specifications

Height adjustment by roller with removable ends:

Hitch type:

Machine net weight, approx. with roller:

Maximum PTO power recommended:

Minimum PTO power requirement:

Number of hammer knives:

PTO speed (rpm):

Required tractor hydraulic connections:

Rotor diameter:

Working width:

Links

Oscillating 3-Point Hitch

Rear Roller

Non-Stop Safety Spring

Frame

Wide Angle PTO joint

Knife Options

Other Offset Mowers Models

Contact

Contact

Consignment

Request a Service

Change Your Preferred Location