Description
The KUHN SB Series balers are the new generation of KUHN large square balers. The SB balers, designed to achieve high capacity and high bale weights, combined with more driver convenience, boost the profitability of the baling operation. Thanks to the improved intake system, an increase in capacity of up to 15% is achieved.
The SB Series balers are designed by KUHN, made by KUHN. The new design offers perfect accessibility to the inside of the machine. The new KUHN patented torque regulation system ensures a perfect balance between capacity and density. The benefit of this sophisticated measuring method is that extra bale weight can be achieved, with higher transport and handling efficiency as a result.
Models
Optimal Crop Pickup
The pickup is designed to match the full capacity of the baler. The wide, 91” pickup, with narrow tine spacing, will leave your fields clean. Pickup teeth on the SB Series are now even stronger than before, with increased tine thickness and a fifth spring coil to extend tine life. Straight pickup tines help release the crop and reduce crop wrapping. Uniquely shaped crop guides result in more aggressive and efficient pickup by exposing more of the tine when needed, and by pulling the crop away from the tines as it approaches the intake. The pickup roller has a large 10-inch diameter which compresses the crop against the pickup tines reducing friction, thus reducing leaf loss and increasing baler efficiency by evening out the windrow. In extreme conditions, pivoting gauge wheels ease wheel and tire stress. To better meet your operation's specific needs, there are two intake options available, the OptiFeed non-cutting rotor or the OptiCut cutting rotor. These two intakes both use our patented integral rotor. Farmers who wish to cut their crop can also choose between the 15- and 23-knife OptiCut cutting rotors. Availability dependent on SB model – See Specifications
Power Feed Roller
A Power Feed roller is now standard on all SB Series balers, to even out heavy windrows and improve capacity up to 15%. This driven crop roller is fully integrated into the intake system and has the ability to vertically rise and fall 7.8 inches to match windrow conditions. Moving up and down as the crop conditions change allows the Power Feed roller to constantly compress the crop and propel it into the intake rotor. As a result, the crop is slightly compressed and evenly distributed as it passes through the rotor, this prevents blockages, ensures smoother running, and reduces power requirements.
Integral Rotor Techology
Available on KUHN SB Series balers is our patented Integral Rotor Technology found on OptiFeed and OptiCut models. This simple, low-maintenance intake system guarantees an enormous throughput capacity at all times. The short distance between rotor and pickup tines maintains consistent crop flow. The design of this force-fed intake makes higher forward speeds possible for increased productivity and reduces crop damage. The Integral Rotor is provided with rotor tines made out of Hardox® wear plates. Hardox combines extreme hardness and toughness to reduce rotor tine wear. Longer wearing life of the rotor tines will help to provide time and money savings for the operator.
Non-Cutting, OptiFeed Rotor
When crop cutting is not required, the OptiFeed system ensures a controlled and consistent crop flow to the prechamber. This rotor design helps even out windrows by moving hay where needed for consistent bale formation. This force-fed, non-cutting intake is the perfect solution for handling tough crop conditions such as cornstalks, short straw and high-moisture crops.
Cutting, OptiCut Rotors
With 20 years of experience behind our cutters, the OptiCut (OC) cutting rotors are designed for unlimited intake capacity and excellent cutting quality. KUHN (OC) cutting rotors, with elliptical shaped rotor tines, are acknowledged by users as one of the best cutting systems on the market. The silage is guided and drawn down to the knives from an early stage which improves flow and cutting performance and also prevents unwanted plugging. OptiCut 15 The OC-15 rotor, on the SB 890, offers a 1.75” theoretical length of cut. The small cut provides better fermentation of forages and more absorbent straw for bedding. The KUHN patented rotor tine shape ensures a low power requirement and a superior cut quality. The knives, individually protected with a spring, can be changed easily with the standard slide tray. OptiCut 23 The OC-23 rotor, on the SB 1290, offers a 1.75” theoretical length of cut. The large 24” OptiCut rotor is designed with your operation’s high-capacity needs in mind. The knives on the OC-23 have individual hydraulic protection. With just two levers, you can easily choose from the following knife group configurations: 0-11-12-23. Together, with the standard slide tray for easy knife changing, you not only invest in cutting quality but, above all, in driver comfort.
Power Density – The KUHN Solution
The Importance of Bale Shape: Consistently shaped bales provide more than just aesthetic appeal. A dense, consistently filled bale represents quality in every form. Square bales are easy to handle and stack. In addition, they are much more stable during transport than a poorly formed bale. In silage applications, a square-edged bale indicates less air content, resulting in higher quality feed. The KUHN Power Density system, a single feeder fork design, proves that a well-engineered component can eliminate complexity. This system ensures consistently filled flakes and results in heavy, square-edged bales regardless of the windrow condition. The single feeder fork combines two functions into one mechanism, eliminating unneeded components and complexity. KUHN’s exclusive Power Density system runs at twice the speed of the plunger allowing a minimum of one flake formed per plunger stroke. This creates consistent bale shape and excellent density.
Power Density – How Does It Work?
The integral rotor actively delivers the crop to the chamber. The single-acting feeder fork (blue) lifts the feed up to the measuring plates (red). The single-acting feeder fork continues to form the bale flake until the measuring plate is pushed back with a predetermined force. Once the measuring plate is pushed back, it locks the single-acting feeder fork to push the perfectly formed flake into the bale chamber.
The Bale Chamber
The specially designed bale chamber of the KUHN SB machines is the result of more than 35 years of experience in large square balers. With the 10-foot long bale chamber, there is plenty of space to form a rock-hard, square-edged bale. The combination of aggressive retainers and special wedge-shaped doors brings maximum compaction and gentle expansion of the bale. Forty-six plunger strokes per minute result in a high bale capacity. The plunger is guided by four large rollers with a 5" diameter for maximum service life.
Double Knotting System
The SB 890 and SB 1290 are equipped with a double-knotting system. With the electronic knotter control, the driver has accurate information concerning twine tension at all times and receives an alarm if an issue arises. The knotting progress can be monitored directly from the tractor cab. During baling, an upper (blue) and lower (red) twine is fed to the bale, because the twine is not slipping around the bale there is no tension on the twine during the bale formation. Step 1: As the bale reaches the desired length, the needles (gray) are activated and move upward to the knotter to start the knotting cycle. In this first step the bale is finished with the first knot. Step 2: Once the first knot has finished the bale, the second knot connects the upper and lower twine again so the bale can be formed without tension on the twine during knotting.
Easy-Access Twine Boxes
The twine boxes swing out completely for easy access to the vital parts of the machine. Behind the full-access side doors, spools of twine can be stored. The SB Series balers have a twine capacity of 32 spools. The swine storage itself is sealed to keep twine rolls clean for consistent, reliable tying.
Heavy-Duty Driveline
KUHN uses a combination of synchronized gearboxes, drivelines and oversized chains designed for maximum life and limited maintenance. The driveline layout is simple, clean, and easy to service and maintain while minimizing the overall number of moving parts.
Instant Protection
The pickup, integral rotor and feeder fork are protected with cam-type clutches, which are automatically activated in the event of an overload. The clutch re-engages when the operator reduces the PTO speed. This allows the operator to restart the stalled component from the driver’s seat, reducing overall downtime that is typical with slip clutches and shear bolts. Another benefit of these clutches is that they give the ability to drive at a constant speed without worrying about plugging. Heavy, large-diameter flywheels are featured on all SB models. The large flywheel creates the force needed to pack the bale. This also reduces the horsepower required, and the torque spikes through the components and driveline, resulting in less fuel consumption and wear for extra longevity.
BALE DIMENSIONS
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Bale size - height x width |
3' x 3' |
3' x 3' |
3' x 4' |
3' x 4' |
| Bale height |
35'' (90 cm) |
35'' (90 cm) |
35'' (90 cm) |
35'' (90 cm) |
| Bale width |
31.4'' (80 cm) |
31.4'' (80 cm) |
47.2'' (120 cm) |
47.2'' (120 cm) |
| Bale length |
2' - 10' (0.6 - 3.0 m) |
2' - 10' (0.6 - 3.0 m) |
2' - 10' (0.6 - 3.0 m) |
2' - 10' (0.6 - 3.0 m) |
INTAKE/BALE CHAMBER
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Intake width |
91'' (230 cm) |
91'' (230 cm) |
91'' (230 cm) |
91'' (230 cm) |
| Number of pickup tine bars |
5 |
5 |
5 |
5 |
| Pickup gauge wheels |
Standard |
Standard |
Standard |
Standard |
| Pickup crop roller |
Standard |
Standard |
Standard |
Standard |
| Intake system |
Integral rotor (with automatic cam clutch overload protection) |
Integral rotor (with automatic cam clutch overload protection) |
Integral rotor (with automatic cam clutch overload protection) |
Integral rotor (with automatic cam clutch overload protection) |
| Number of knives |
- |
15 knives optional with knife protection system |
- |
23 knives optional with knife protection system |
| Minimum cutting length |
1 3/4'' (4.5 cm) |
1 3/4'' (4.5 cm) |
1 3/4'' (4.5 cm) |
1 3/4'' (4.5 cm) |
| Power Density pre-chamber |
Mechanical POWER DENSITY pre-chamber |
Mechanical POWER DENSITY pre-chamber |
Mechanical POWER DENSITY pre-chamber |
Mechanical POWER DENSITY pre-chamber |
| Plunger strokes / min |
46 |
46 |
46 |
46 |
| Density control |
3 hydraulic cylinders via self-contained hydraulic system |
3 hydraulic cylinders via self-contained hydraulic system |
4 hydraulic cylinders via self-contained hydraulic system |
4 hydraulic cylinders via self-contained hydraulic system |
| Knotting |
4 double knotters |
4 double knotters |
6 double knotters |
6 double knotters |
| Knotter fans |
Standard (centrifugal) - dual hydraulic-driven |
Standard (centrifugal) - dual hydraulic-driven |
Standard (centrifugal) - dual hydraulic-driven |
Standard (centrifugal) - dual hydraulic-driven |
| Machine greasing |
Standard automatic central greasing with quick fill grease gun |
Standard automatic central greasing with quick fill grease gun |
Standard automatic central greasing with quick fill grease gun |
Standard automatic central greasing with quick fill grease gun |
| Twine spool capacity |
32 rolls |
32 rolls |
32 rolls |
32 rolls |
MACHINE CHARACTERISTICS
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Minimum tractor requirement |
105 hp (77 kW) |
120 hp (88 kW) |
140 hp (103 kW) |
165 hp (121 kW) |
| PTO speed (rpm) |
1,000 rpm |
1,000 rpm |
1,000 rpm |
1,000 rpm |
| Drawbar hitch |
Cat. 4 Bull-Pull |
Cat. 4 Bull-Pull |
Cat. 4 Bull-Pull |
Cat. 4 Bull-Pull |
| Hydraulic jack |
Standard |
Standard |
Standard |
Standard |
| Transport width |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
WHEELS AND TIRES
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Parking brakes |
Standard |
Standard |
Standard |
Standard |
| Axle |
Tandem axle |
Tandem axle |
Tandem axle |
Tandem axle |
| Brakes |
Standard hydraulic brakes |
Standard hydraulic brakes |
Standard hydraulic brakes |
Standard hydraulic brakes |
| Tires |
425/65R22.5 |
425/65R22.5 |
425/65R22.5 |
425/65R22.5 |
OPERATION
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| ISOBUS ready |
Standard |
Standard |
Standard |
Standard |
| Electronic monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
| Work lights |
Standard service lights on needles and twine box |
Standard service lights on needles and twine box |
Standard service lights on needles and twine box |
Standard service lights on needles and twine box |
| Road lights and signaling |
Standard |
Standard |
Standard |
Standard |
| Fire extinguisher |
Standard 2.5 gallon refillable water type (dealer installed) |
Standard 2.5 gallon refillable water type (dealer installed) |
Standard 2.5 gallon refillable water type (dealer installed) |
Standard 2.5 gallon refillable water type (dealer installed) |
| Service platform |
Standard foldable railing |
Standard foldable railing |
Standard foldable railing |
Standard foldable railing |
| Required tractor hydraulic connections |
2 SA and 1 DA |
2 SA and 1 DA |
2 SA and 1 DA |
2 SA and 1 DA |
MACHINE WEIGHT
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Machine weight |
18,960 lbs (8,600 kg) |
19,620 lbs (8,900 kg) |
21,385 lbs (9,700 kg) |
22,820 lbs (10,350 kg) |
BALE FORMATION
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Chute |
Standard - hydraulic roller |
Standard - hydraulic roller |
Standard - hydraulic roller |
Standard - hydraulic roller |
| Last bale ejector |
Standard |
Standard |
Standard |
Standard |
Links
Copy Set
Optimal Crop Pickup
The pickup is designed to match the full capacity of the baler. The wide, 91” pickup, with narrow tine spacing, will leave your fields clean. Pickup teeth on the SB Series are now even stronger than before, with increased tine thickness and a fifth spring coil to extend tine life. Straight pickup tines help release the crop and reduce crop wrapping. Uniquely shaped crop guides result in more aggressive and efficient pickup by exposing more of the tine when needed, and by pulling the crop away from the tines as it approaches the intake. The pickup roller has a large 10-inch diameter which compresses the crop against the pickup tines reducing friction, thus reducing leaf loss and increasing baler efficiency by evening out the windrow. In extreme conditions, pivoting gauge wheels ease wheel and tire stress. To better meet your operation's specific needs, there are two intake options available, the OptiFeed non-cutting rotor or the OptiCut cutting rotor. These two intakes both use our patented integral rotor. Farmers who wish to cut their crop can also choose between the 15- and 23-knife OptiCut cutting rotors. Availability dependent on SB model – See Specifications
Power Feed Roller
A Power Feed roller is now standard on all SB Series balers, to even out heavy windrows and improve capacity up to 15%. This driven crop roller is fully integrated into the intake system and has the ability to vertically rise and fall 7.8 inches to match windrow conditions. Moving up and down as the crop conditions change allows the Power Feed roller to constantly compress the crop and propel it into the intake rotor. As a result, the crop is slightly compressed and evenly distributed as it passes through the rotor, this prevents blockages, ensures smoother running, and reduces power requirements.
Integral Rotor Techology
Available on KUHN SB Series balers is our patented Integral Rotor Technology found on OptiFeed and OptiCut models. This simple, low-maintenance intake system guarantees an enormous throughput capacity at all times. The short distance between rotor and pickup tines maintains consistent crop flow. The design of this force-fed intake makes higher forward speeds possible for increased productivity and reduces crop damage. The Integral Rotor is provided with rotor tines made out of Hardox® wear plates. Hardox combines extreme hardness and toughness to reduce rotor tine wear. Longer wearing life of the rotor tines will help to provide time and money savings for the operator.
Non-Cutting, OptiFeed Rotor
When crop cutting is not required, the OptiFeed system ensures a controlled and consistent crop flow to the prechamber. This rotor design helps even out windrows by moving hay where needed for consistent bale formation. This force-fed, non-cutting intake is the perfect solution for handling tough crop conditions such as cornstalks, short straw and high-moisture crops.
Cutting, OptiCut Rotors
With 20 years of experience behind our cutters, the OptiCut (OC) cutting rotors are designed for unlimited intake capacity and excellent cutting quality. KUHN (OC) cutting rotors, with elliptical shaped rotor tines, are acknowledged by users as one of the best cutting systems on the market. The silage is guided and drawn down to the knives from an early stage which improves flow and cutting performance and also prevents unwanted plugging. OptiCut 15 The OC-15 rotor, on the SB 890, offers a 1.75” theoretical length of cut. The small cut provides better fermentation of forages and more absorbent straw for bedding. The KUHN patented rotor tine shape ensures a low power requirement and a superior cut quality. The knives, individually protected with a spring, can be changed easily with the standard slide tray. OptiCut 23 The OC-23 rotor, on the SB 1290, offers a 1.75” theoretical length of cut. The large 24” OptiCut rotor is designed with your operation’s high-capacity needs in mind. The knives on the OC-23 have individual hydraulic protection. With just two levers, you can easily choose from the following knife group configurations: 0-11-12-23. Together, with the standard slide tray for easy knife changing, you not only invest in cutting quality but, above all, in driver comfort.
Power Density – The KUHN Solution
The Importance of Bale Shape: Consistently shaped bales provide more than just aesthetic appeal. A dense, consistently filled bale represents quality in every form. Square bales are easy to handle and stack. In addition, they are much more stable during transport than a poorly formed bale. In silage applications, a square-edged bale indicates less air content, resulting in higher quality feed. The KUHN Power Density system, a single feeder fork design, proves that a well-engineered component can eliminate complexity. This system ensures consistently filled flakes and results in heavy, square-edged bales regardless of the windrow condition. The single feeder fork combines two functions into one mechanism, eliminating unneeded components and complexity. KUHN’s exclusive Power Density system runs at twice the speed of the plunger allowing a minimum of one flake formed per plunger stroke. This creates consistent bale shape and excellent density.
Power Density – How Does It Work?
The integral rotor actively delivers the crop to the chamber. The single-acting feeder fork (blue) lifts the feed up to the measuring plates (red). The single-acting feeder fork continues to form the bale flake until the measuring plate is pushed back with a predetermined force. Once the measuring plate is pushed back, it locks the single-acting feeder fork to push the perfectly formed flake into the bale chamber.
The Bale Chamber
The specially designed bale chamber of the KUHN SB machines is the result of more than 35 years of experience in large square balers. With the 10-foot long bale chamber, there is plenty of space to form a rock-hard, square-edged bale. The combination of aggressive retainers and special wedge-shaped doors brings maximum compaction and gentle expansion of the bale. Forty-six plunger strokes per minute result in a high bale capacity. The plunger is guided by four large rollers with a 5" diameter for maximum service life.
Double Knotting System
The SB 890 and SB 1290 are equipped with a double-knotting system. With the electronic knotter control, the driver has accurate information concerning twine tension at all times and receives an alarm if an issue arises. The knotting progress can be monitored directly from the tractor cab. During baling, an upper (blue) and lower (red) twine is fed to the bale, because the twine is not slipping around the bale there is no tension on the twine during the bale formation. Step 1: As the bale reaches the desired length, the needles (gray) are activated and move upward to the knotter to start the knotting cycle. In this first step the bale is finished with the first knot. Step 2: Once the first knot has finished the bale, the second knot connects the upper and lower twine again so the bale can be formed without tension on the twine during knotting.
Easy-Access Twine Boxes
The twine boxes swing out completely for easy access to the vital parts of the machine. Behind the full-access side doors, spools of twine can be stored. The SB Series balers have a twine capacity of 32 spools. The swine storage itself is sealed to keep twine rolls clean for consistent, reliable tying.
Heavy-Duty Driveline
KUHN uses a combination of synchronized gearboxes, drivelines and oversized chains designed for maximum life and limited maintenance. The driveline layout is simple, clean, and easy to service and maintain while minimizing the overall number of moving parts.
Instant Protection
The pickup, integral rotor and feeder fork are protected with cam-type clutches, which are automatically activated in the event of an overload. The clutch re-engages when the operator reduces the PTO speed. This allows the operator to restart the stalled component from the driver’s seat, reducing overall downtime that is typical with slip clutches and shear bolts. Another benefit of these clutches is that they give the ability to drive at a constant speed without worrying about plugging. Heavy, large-diameter flywheels are featured on all SB models. The large flywheel creates the force needed to pack the bale. This also reduces the horsepower required, and the torque spikes through the components and driveline, resulting in less fuel consumption and wear for extra longevity.
BALE DIMENSIONS
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Bale size - height x width |
3' x 3' |
3' x 3' |
3' x 4' |
3' x 4' |
| Bale height |
35'' (90 cm) |
35'' (90 cm) |
35'' (90 cm) |
35'' (90 cm) |
| Bale width |
31.4'' (80 cm) |
31.4'' (80 cm) |
47.2'' (120 cm) |
47.2'' (120 cm) |
| Bale length |
2' - 10' (0.6 - 3.0 m) |
2' - 10' (0.6 - 3.0 m) |
2' - 10' (0.6 - 3.0 m) |
2' - 10' (0.6 - 3.0 m) |
INTAKE/BALE CHAMBER
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Intake width |
91'' (230 cm) |
91'' (230 cm) |
91'' (230 cm) |
91'' (230 cm) |
| Number of pickup tine bars |
5 |
5 |
5 |
5 |
| Pickup gauge wheels |
Standard |
Standard |
Standard |
Standard |
| Pickup crop roller |
Standard |
Standard |
Standard |
Standard |
| Intake system |
Integral rotor (with automatic cam clutch overload protection) |
Integral rotor (with automatic cam clutch overload protection) |
Integral rotor (with automatic cam clutch overload protection) |
Integral rotor (with automatic cam clutch overload protection) |
| Number of knives |
- |
15 knives optional with knife protection system |
- |
23 knives optional with knife protection system |
| Minimum cutting length |
1 3/4'' (4.5 cm) |
1 3/4'' (4.5 cm) |
1 3/4'' (4.5 cm) |
1 3/4'' (4.5 cm) |
| Power Density pre-chamber |
Mechanical POWER DENSITY pre-chamber |
Mechanical POWER DENSITY pre-chamber |
Mechanical POWER DENSITY pre-chamber |
Mechanical POWER DENSITY pre-chamber |
| Plunger strokes / min |
46 |
46 |
46 |
46 |
| Density control |
3 hydraulic cylinders via self-contained hydraulic system |
3 hydraulic cylinders via self-contained hydraulic system |
4 hydraulic cylinders via self-contained hydraulic system |
4 hydraulic cylinders via self-contained hydraulic system |
| Knotting |
4 double knotters |
4 double knotters |
6 double knotters |
6 double knotters |
| Knotter fans |
Standard (centrifugal) - dual hydraulic-driven |
Standard (centrifugal) - dual hydraulic-driven |
Standard (centrifugal) - dual hydraulic-driven |
Standard (centrifugal) - dual hydraulic-driven |
| Machine greasing |
Standard automatic central greasing with quick fill grease gun |
Standard automatic central greasing with quick fill grease gun |
Standard automatic central greasing with quick fill grease gun |
Standard automatic central greasing with quick fill grease gun |
| Twine spool capacity |
32 rolls |
32 rolls |
32 rolls |
32 rolls |
MACHINE CHARACTERISTICS
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Minimum tractor requirement |
105 hp (77 kW) |
120 hp (88 kW) |
140 hp (103 kW) |
165 hp (121 kW) |
| PTO speed (rpm) |
1,000 rpm |
1,000 rpm |
1,000 rpm |
1,000 rpm |
| Drawbar hitch |
Cat. 4 Bull-Pull |
Cat. 4 Bull-Pull |
Cat. 4 Bull-Pull |
Cat. 4 Bull-Pull |
| Hydraulic jack |
Standard |
Standard |
Standard |
Standard |
| Transport width |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
9'1" - 9'10" (2.8 - 3.0 m) depending on axles and wheel size |
WHEELS AND TIRES
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Parking brakes |
Standard |
Standard |
Standard |
Standard |
| Axle |
Tandem axle |
Tandem axle |
Tandem axle |
Tandem axle |
| Brakes |
Standard hydraulic brakes |
Standard hydraulic brakes |
Standard hydraulic brakes |
Standard hydraulic brakes |
| Tires |
425/65R22.5 |
425/65R22.5 |
425/65R22.5 |
425/65R22.5 |
OPERATION
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| ISOBUS ready |
Standard |
Standard |
Standard |
Standard |
| Electronic monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
No monitor standard; optional CCI 800 or CCI 1200 ISOBUS monitor |
| Work lights |
Standard service lights on needles and twine box |
Standard service lights on needles and twine box |
Standard service lights on needles and twine box |
Standard service lights on needles and twine box |
| Road lights and signaling |
Standard |
Standard |
Standard |
Standard |
| Fire extinguisher |
Standard 2.5 gallon refillable water type (dealer installed) |
Standard 2.5 gallon refillable water type (dealer installed) |
Standard 2.5 gallon refillable water type (dealer installed) |
Standard 2.5 gallon refillable water type (dealer installed) |
| Service platform |
Standard foldable railing |
Standard foldable railing |
Standard foldable railing |
Standard foldable railing |
| Required tractor hydraulic connections |
2 SA and 1 DA |
2 SA and 1 DA |
2 SA and 1 DA |
2 SA and 1 DA |
MACHINE WEIGHT
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Machine weight |
18,960 lbs (8,600 kg) |
19,620 lbs (8,900 kg) |
21,385 lbs (9,700 kg) |
22,820 lbs (10,350 kg) |
BALE FORMATION
| |
SB 890 OPTIFEED |
SB 890 OPTICUT |
SB 1290 OPTIFEED |
SB 1290 OPTICUT |
| Chute |
Standard - hydraulic roller |
Standard - hydraulic roller |
Standard - hydraulic roller |
Standard - hydraulic roller |
| Last bale ejector |
Standard |
Standard |
Standard |
Standard |
