Degelman 20/26
Pro-Till
Your Preferred Location
Features
-
Residue Management: Yields can be hampered by tough, heavy residue from crops like peas, sunflowers, barley, wheat, soybeans, cotton and BT corn. This is no longer a problem. Pro-Till is ideally pulled fast - 10 to 14 mph fast. Our proven combination of independent disc arms, with small diameter shallow discs, motion- dampening rubber suspension, sturdy frame and cutting-edge furrow rollers allow this tillage tool to slice through residue as never seen before. Pro-Till will cut, weed, throw and mix soils at incredible speeds and usually in one pass. This is a true residue-killing machine.
-
Oversized Hydraulic Jack: Pro-Till’s hydraulic jack with oversized leveling pad is centered on the machine for perfect balance and stability on any ground surface. With its large range of motion, the jack is easily controlled by one operator for any vehicle height.
-
Max Life Scrapers: With up to 10 times longer wear than standard scrapers, Max Life scrapers take advantage of new hard surfacing technology. Tungsten carbide is mixed directly into the molten weld bead. Tungsten carbide is an extremely hard, metal matrix composite material that easily withstands the abrasive effect of running in soil. During the break-in period, the leading edge of steel is worn off to match the attack angle of the blade. The tungsten carbide is then the primary point of contact.
-
Semi-Pneumatic Technology: Pro-Till’s exclusive Otico rollers are an excellent all-around packer with a unique corrugated ridge profile, which leaves a field finish designed to manage moisture and prevent soil erosion. Pro-Till’s furrow rollers outperform any typical cage roller, regardless of soil type or soil conditions. Proven effective in clay, sand, gumbo, and rocky soil, the furrow roller performs especially well in wet fields. Unlike a cage roller, the furrow roller is designed to shed soil to prevent plugging and reduce maintenance. A special semi-pneumatic technology is integrated into the Pro-Till rollers making them work well in rocky soils and more resistant to wet conditions. Designed by OTICO of France, these exclusive rubber rollers are formulated from special rubber compounds. Uniquely molded over a high-strength steel core, they are also hollow, giving them the ability to flex each turn, partly absorb shock from stones and hard conditions, and also help shed mud with every revolution.
-
Weight is Inherent in the Overbuilt Frame: Other machines require extra weight stacks, but the Pro-Till carries its weight in the frame - where it should be. As the heavyweight in the industry, with an average per-foot weight of nearly 1,000 lbs, the Pro-Till has the downward force to handle the most extreme soil and trash conditions.
-
Prepare Your Seedbed Quickly: Pro-Till’s cultivation design creates a superior field finish in one pass by combining an aggressive till action with an exclusive furrow roller system. The shallow, high speed discs cut and mix residue to ensure a healthy soil structure. The ridge shape of the rollers crushes, clods and creates a corrugated soil profile and an ideal seedbed. The Pro-Till has the unique ability to cultivate and warm the soil during cold wet conditions when all other forms of tillage plug and fail. In as little as one day and after one the soil during cold wet conditions when all other forms of tillage plug and fail. In as little as one day and after one pass, frigid heavy residue soil is cut, turned, mixed, firmed and ready for seeding. Pro-Till in the spring can mean the difference between success and failure.
-
Simple, Strong and Clean Scraper System: Utilizing a minimalist approach, the long arms of the scrapers create great trash flow. The scrapers are easy to adjust, easy to clean and are removed with the loosening of a bolt. Max Life scrapers will significantly increase the life and performance of your roller scrapers. The tungsten carbide tipped scrapers maintain their original length and shape, resulting in a clean roller and a more consistent field finish.
-
Maximum Trash Flow: Pro-Till discs have a shallow face to eliminate compaction layers, and the high-tensile strength steel arms provide maximum flow through with three times the spring back of normal mild steel. Pro-Till’s high-speed, aggressive tillage, combined with more room between the discs, maximizes trash flow and eliminates plugging.
-
True High Speed Tillage: The Pro-Till shreds residue at speeds over 10 mph, up to three times the speed of traditional cultivators, while ensuring uniform distribution of residue to eliminate problems such as uneven and delayed emergence, hair pinning, erosion and seeder/planter plugging.
-
Simplified. Organized. Ergonomic.: From start to finish, Pro-Till was designed with a user experience in mind. Our Kennfixx knurled grip couplers are hassle free, ergonomic and color coordinated to easily identify which hydraulics are routed to which action on the Pro-Till. When not in use, the hydraulic hoses are tucked away neatly in each of their own color coded slots. The user manual is easily accessible and safe from damage.
-
Faster Germination Effective Erosion Control Enriched Soil Structure Improved Gas Exchange: These rollers are an excellent all-around roller suitable for all types of soil conditions and offer very good consolidation. The micro-ridge shape of the Pro-Till rollers allow water to be stored in the corrugated valleys, driven to lower soil layers and stored in a uniform way. Proper soil consolidation is critical to allow water stored in deep soil layers to flow. Corrugated rollers help seeds germinate and grow in the shortest possible time by creating a firm field finish. The compact soil improves the soil to seed/root contact which enables an efficient transfer of nutrients. It also preserves moisture, which is especially important during dry years. The Pro-Till rollers are key to protecting soil against heavy rainfalls and high winds. The rollers consolidate the soil, providing valleys for water storage and creating ridges to reduce wind and water erosion. After residue has been cut and mixed, our exclusive corrugated rollers finish the field to perfection. The hollow corrugated rubber design sheds soil, breaks up the larger clods and consolidates the soil to bring fine earth in contact with residue to optimize decomposition. Healthy soil must be allowed to breathe. Pro-Till’s furrow rollers create a pattern of ridges that optimize gas exchange by forming a highly compacted zone next to a less compacted zone. These zones allow a rapid exchange of carbon dioxide and oxygen between the soil pores.
-
Maintenance-Free Rock Shaft Bushings: These Devol composite bushings are maintenance-free and greaseless. They are shock, abrasion and wear resistant. The bushings are very low friction making them durable and hard wearing. They will not corrode.
-
Maintenance-Free Roller Bearings: Proven through years of research, development and rigorous testing in both lab and field, the advanced sealing technology ensures optimal performance for the customer. technology ensures optimal performance for the customer. TILLXTREME™ offers a one-of-a-kind, exclusive high-performance solution designed to eliminate the need for re-lubrication, saving precious hours needed for field work. PEER’s patented seal design provides significantly improved contamination exclusion than the conventional triple-lip seal design. PEER’s TILLXTREME™ engineered assemblies are more reliable, maintenance-free, and make installation easy. As an environmentally friendly solution, there is no grease purge to contaminate the soil.
-
Rubber Suspension System Offers Flawless Rock Protection: Degelman knows a thing or two about rocks. Conditions aren’t always perfect. That’s why the Pro-Till disc system replaces the traditional gang with independent disc arms that slice and mix soil at speeds never before achieved. When a stone is encountered, the rubber elements roll and compress, automatically dampening the impact and providing protection, while immediately springing the disc back into operation.
-
Maintenance-Free Depth Control: Adjusting the front and rear cutting depth on Pro-Till is easy and accurate. Mechanical plates swivel in or out to adjust cutting depth in 1/2 inch intervals, making this a simple, organized and reliable system.
-
ROLL FORWARD & SELF CONTOURING FRAME: A unique benefit of the Pro-Till is the patented roll forward frame design which gives operators the ability to completely rotate the frame and rear disc sections off the ground, making it easy to maneuver out of trouble in wet conditions. This design, together with the impressive weight distributions of the oversized high-flotation tires, lets the operator back up, drive forward, unplug, or simply drive away from any difficulty. Degelman’s self-contour frame allows Pro-Till to follow the curvature of varying terrains while maintaining a consistent depth. The independent wing sections and a shallow floating frame give Pro-Till the flexibility to handle steep inclines or downward slopes. This floating, self-contouring design, coupled with Pro-Till’s independent discs, help produce a flawless, uniform field.
-
High Performance Tillage: This is Pro-Till by Degelman. The fastest and most versatile piece of tillage equipment you will ever own, Pro-Till shreds heavy fall residue, opens up spring fields, levels ruts, destroys clods and produces an absolutely perfect seed bed. Pro-Till is High Speed, High Performance Tillage.
-
Level Ruts, Clean up Cattails and Sloughs Break Pasture and Grassland: Pro-Till is your single spring and fall solution to tillage needs. Pro-Till is ideal for fixing headlands, leveling and filling ruts and tracks in the spring or fall and cleaning up cattails and sloughs. Today’s heavy tractors, trucks, sprayers, grain carts and center-fill planters can produce deep, compacted ruts that restrict root growing space, inhibiting yields and potentially damaging expensive equipment. The Degelman Pro-Till high performance disc has just the right amount of dirt carrying capacity to level almost any field. One or two additional cross-direction passes may be required to completely level and fill the most severe ruts. The Degelman Pro-Till is a versatile tool to add to your farming operation. In addition to managing your residue and cleaning up your fields, The Pro-Till offers the ability to turn pastures or grassland into farmable land in as few as 2-3 passes, depending on any prior work, including burning or breaking. By reducing the amount of different tools needed to convert your pasture into profitable farmland, the Degelman Pro-Till saves you time and money.
Safely Transport To & From The Field
Pro-Till is user-friendly, allowing the operator to engage the transport position from the safety of the tractor seat. The wing-forward design is incredibly compact and stable for road transport. It incorporates an ultra-low profile-under 13’ (3.9m) - which is ideal for clearing bridges and power lines. The hitch weight is positive, creating a safe and highly maneuverable machine.
Exclusive Self-Lubricated, Zero Maintenance Bushing
These bushings, manufactured from a friction liner applied on a glass fiber structure, have excellent friction properties and improved wear resistance without external lubrication, even on high loads.
Swing Away Deflector
The swing away deflector is a strong, simple part that redistributes soil from the front discs to the rear of the back discs to ensure no ridges or grooves are left. The depth of the deflector can be adjusted. The teeth vibrate to allow fine soil to sift through without sticking. The deflector can be rotated 180 degrees when not in use.
Oversized Electroless Plated Nickel Pin
Oversized Electroless |
At 2” in diameter, these high-tensile steel |
20/26
Put away the grease gun. The window for spring and fall work is quick and unforgiving. Give yourself the upper hand with game changing maintenance-free technology.
Farming operations are becoming bigger and more complicated every day. We know time is money, and that you have more to worry about then greasing your tillage equipment. Zero-maintenance pins, completely sealed bearings, and bullet-proof disc hubs make the Pro-Till 20/26 worry-free tillage.
Pin Eye Cylinders
The welded pin eye cylinder series is designed to withstand the most demanding applications on the market today. Lion’s extensive design experience has resulted in a premium rephasing cylinder with the latest in sealing and rephasing technology and standard Lion1000 induction hardened rods for the ultimate in corrosion protection and durability.
HORSEPOWER REQUIREMENTS
|
|
12hp |
15hp |
20hp |
| PTL 20’ |
250 |
300 |
400 |
| PTL 26’ |
300 |
400 |
500 |
Bushing Seal
The wiper edge removes even the toughest dirt and contaminants from the pin, keeping the system running clean and at its peak performance. The metal enclosure ensures a secure fit in the open housing, preventing expulsion of the wiper, even under extreme conditions.
SPECIFICATIONS
| Model |
PT20 |
PT26 |
| Width Available |
20’(6 m) |
26’(8 m) |
| Transport Height (rubber roller) |
12’-9” (3.9 m) |
13’ (4 m) |
| Transport Height (cage roller) |
12’-1” (3.7 m) |
12’-4” (3.8m) |
| Transport Width |
13’-10” (4.2 m) |
13’-10” (4.2m) |
| Weight (including gauge wheels) |
20,080 lbs (9,110 kg) |
23,480 lbs (10,650 kg) |
| Hitch Weight |
5,200 lbs (2,360 kg) |
6,510 lbs (2,952 kg) |
| Number of Discs(per-wing) |
23 |
31 |
| Disc Arm Mounting |
Rubber Torsion - 4 Elements per Arm |
Rubber Torsion - 4 Elements per Arm |
| Disc Spacing |
5” Overall Spacing (10” Spacing per Row) |
5” Overall Spacing (10” Spacing per Row) |
| Hitch Frame |
6” x 10” x 3/8” |
6” x 10” x 3/8” |
| Center Frame |
6” x 10” x 3/8” |
6” x 10” x 3/8” |
| Wing Frame |
6” x 6” x 3/8” |
6” x 6” x 3/8” |
| Tires |
Alliance 600/50R22.5 FLOTRUCK |
Alliance 600/50R22.5 FLOTRUCK |
| Hubs |
H1010-9 (10 Bolt) |
H1010-9 (10 Bolt) |
| Roller Bearings |
2-7/16” Ball Bearing 6-Lip Seal |
2-7/16” Ball Bearing 6-Lip Seal |
| Hydraulics - Wheel/Roller |
Rephasing Circuit Masters 4-1/4” x 8” x 2” Rod & Slaves 3-3/4” x 8” x 2” Rod |
Rephasing Circuit Masters 4-1/4” x 8” x 2” Rod & Slaves 3-3/4” x 8” x 2” Rod |
| Hydraulics - Transport Lift |
5” x 40” x 2-1/2” Rod |
5” x 40” x 2-1/2” Rod |
| Hydraulics - Wing Forward |
4” x 20” x 2” Rod |
4” x 20” x 2” Rod |
| Roller Size |
9’-10” (3 m) |
9’-10” (3 m) |
| Hydraulic Jack |
Standard |
Standard |
| Safety Lights |
Standard |
Standard |
| Soil Deflector |
Standard |
Standard |
| Gauge Wheels |
Standard |
Standard |