Degelman Strawmaster
| Make | Degelman |
| Model | Strawmaster |
| Type | Heavy Harrows |
Your Preferred Location
Description
The Degelman Strawmaster is engineered tough and designed to tackle enormous straw problems. Available in 5 row; 26” x 5/8” tines or 7 row; 26" x 1/2" tines equipped with tungsten carbide Endura-Tip tines, and set in large ten foot wide sections, this machine is at the forefront of modern straw management. The Strawmaster series of heavy harrows will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.
Models
SPECIFICATIONS (Strawmaster 7000 Series 7 Bar)
| Model |
SM50 |
SM70 |
SM82 |
| Widths Available |
50’ |
70’ |
82’ |
| Weight |
11,700 lbs |
16,080 lbs |
18,400 lbs |
| Horsepower (min) |
285 |
400 |
475 |
| Horsepower (ideal) |
325 |
450 |
525 |
| Transport Length |
42’ |
52’ |
58’ |
| Harrow Sections |
5 |
7 |
9 |
| Wing Beam |
8” X 8” X 1/4” |
8” X 8” X 1/4” |
8” X 8” X 3/8” |
| Tires - Transport & End Wheel |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
| Transport Hitch Weight |
-300 lbs (upwards) |
| Transport Width |
14’ - 7” |
| Transport Height |
11’ - 6” |
| Trailer Frame |
4” x 8” x 1/4” |
| Rows of Tines |
7 |
| Tine Spacing |
14” Centers |
| Tine Section Frame |
2” x 4” x 1/4” |
| Tine Size |
1/2” x 26” Standard, Carbide Endura-Tip |
| Tine Replacement |
Easy Drop-Out Tine Bar |
| Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
| Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
| Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
| Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
| Tires - Main Cart |
16.5L x 16.1 |
Strawmaster
7 ROW CONFIGURATION OFFERS A MID DUTY FINISHON DEGELMAN’S LEGENDARY HEAVY DUTY FRAME
7 rows offers 68% More Ground Engagement
The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting. Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw. The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of ½” x 26” tines with 1-7/16” spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.Patented Torsion Technology
Simply rotate the 8” x 8” beam hydraulicallyand apply more pressure through the spring
bars. Strawmaster works the way you want it to.
Breaking and Spreading Straw
The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 12 mph can be attained.Strawmaster
From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.SPECIFICATIONS (Strawmaster 7000 Series 5 Bar)
| Model |
SM30 |
SM50 |
SM70 |
SM82 |
| Widths Available |
30’ |
50’ |
70’ |
82’ |
| Weight |
7,700 lbs |
11,360 lbs |
13,940 lbs |
15,238 lbs |
| Horsepower (min) |
100 |
150 |
200 |
300 |
| Horsepower (ideal) |
150 |
200 |
300 |
350 |
| Transport Length |
32’ |
42’ |
52’ |
58’ |
| Harrow Sections |
3 |
5 |
7 |
9 |
| Wing Beam |
N/A |
8” X 8” X 1/4” |
N/A |
8” X 8” X 3/4” |
| Tires - Transport & End Wheel |
11 L x 15 Highway |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
| Transport Hitch Weight |
-300 lbs (upwards) |
| Transport Width |
14’ - 7” |
| Transport Height |
10’ - 6” |
| Trailer Frame |
4” x 8” x 1/4” |
| Rows of Tines |
5
|
| Tine Spacing |
18” Centers |
| Tine Section Frame |
2” x 4” x 3/16” |
| Tine Size |
5/8” x 26” Standard, Carbide Endura-Tip |
| Tine Replacement |
Easy Drop-Out Tine Bar |
| Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
| Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
| Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
| Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
| Tires - Main Cart |
16.5L x 16.1 |
Raking
The Strawmaster is quickly becoming the most popularmachine for raking flax straw. It can maximize holding
capacity by applying pressure through the spring bar
control.
Ground Contouring
Under float or under pressure, the harrow sections are designed for flexibility. The torsion spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The bars can then flex in response to counter pressure from the land contours with each section rising over hills and falling into hollows.Strawmaster
KEEP IT SIMPLEMINIMAL PARTS - MINIMAL MAINTENANCE The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.
Easy, Drop-Out Tine Replacement
The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.Features
- High Performance Harrows: Degelman Industries pioneered the heavy harrow over 27 years ago, and hasn’t looked back since. If you’re looking to tackle enormous straw problems, the Degelman Strawmaster line of heavy harrows is what you’re looking for. Our impressive line of Strawmaster High Performance Field Conditioners all come equipped with the exclusive, game changing, carbide Endura-Tip tines, which significantly increase the life and performance of your Degelman Strawmaster. The Strawmaster will shatter straw, control weeds, rake flax straw, and incorporate seed and chemicals.
- 26” or 30” of Vibration Cutting Edge Tungsten Carbide: Perfectly engineered for movement. Creating the maximum amount of mixture, leaving a fine, flawless seedbed. The sharp corners of the square tungsten carbide tip act as cutting edges, chopping and mixing at a far superior rate than that of traditional round tine tips. Simply the best tines available on the market today. At 1.5 times the hardness of titanium, our tungsten carbide tine tips are proven to last 8 – 10 times longer than our competitors.
Copy Set
SPECIFICATIONS (Strawmaster 7000 Series 7 Bar)
| Model |
SM50 |
SM70 |
SM82 |
| Widths Available |
50’ |
70’ |
82’ |
| Weight |
11,700 lbs |
16,080 lbs |
18,400 lbs |
| Horsepower (min) |
285 |
400 |
475 |
| Horsepower (ideal) |
325 |
450 |
525 |
| Transport Length |
42’ |
52’ |
58’ |
| Harrow Sections |
5 |
7 |
9 |
| Wing Beam |
8” X 8” X 1/4” |
8” X 8” X 1/4” |
8” X 8” X 3/8” |
| Tires - Transport & End Wheel |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
| Transport Hitch Weight |
-300 lbs (upwards) |
| Transport Width |
14’ - 7” |
| Transport Height |
11’ - 6” |
| Trailer Frame |
4” x 8” x 1/4” |
| Rows of Tines |
7 |
| Tine Spacing |
14” Centers |
| Tine Section Frame |
2” x 4” x 1/4” |
| Tine Size |
1/2” x 26” Standard, Carbide Endura-Tip |
| Tine Replacement |
Easy Drop-Out Tine Bar |
| Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
| Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
| Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
| Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
| Tires - Main Cart |
16.5L x 16.1 |
Strawmaster
7 ROW CONFIGURATION OFFERS A MID DUTY FINISH
ON DEGELMAN’S LEGENDARY HEAVY DUTY FRAME
ON DEGELMAN’S LEGENDARY HEAVY DUTY FRAME
7 rows offers 68% More Ground Engagement
The Strawmaster 7 row gives you approximately 68% more ground coverage in the field. It’s combination of ground engagement and tine vibration can manage your crop residue without disturbing too much soil and losing moisture in the fall. In the spring you can break up lumps and clods and loosen the soil, which leaves a superior field finish and seedbed for the for seeding or planting.
Traditionally, more tines mean more wear parts. Every Strawmaster 7 comes equipped with standard carbide Endura-Tip tines. Which in addition to providing 4x the life of a standard harrow tine, actually which helps bust and move more straw.
The Degelman Strawmaster 7 High Performance Field Conditioner features 7 rows of ½” x 26” tines with 1-7/16” spacing built on frame heavy enough to handle the toughest conditions. This means more time in the field and less time in the shop.
Patented Torsion Technology
Simply rotate the 8” x 8” beam hydraulically
and apply more pressure through the spring
bars. Strawmaster works the way you want it to.
and apply more pressure through the spring
bars. Strawmaster works the way you want it to.
Breaking and Spreading Straw
The primary purpose of the Strawmaster is to breakup and spread most types of straw residue efficiently. High frequency vibration provides the shattering action for perfect residue control. For most farming practices, speeds of up to 12 mph can be attained.
Strawmaster
From the bottom up, Strawmaster was designed to hold and shatter straw, follow contour, rake flax residue, seed, control weeds, pack and spread residue evenly. To do this effectively, proper frame and tine angle adjustment is always important. When you’re harrowing a variety of crops under different field conditions, fast and easy adjustment is critical.
SPECIFICATIONS (Strawmaster 7000 Series 5 Bar)
| Model |
SM30 |
SM50 |
SM70 |
SM82 |
| Widths Available |
30’ |
50’ |
70’ |
82’ |
| Weight |
7,700 lbs |
11,360 lbs |
13,940 lbs |
15,238 lbs |
| Horsepower (min) |
100 |
150 |
200 |
300 |
| Horsepower (ideal) |
150 |
200 |
300 |
350 |
| Transport Length |
32’ |
42’ |
52’ |
58’ |
| Harrow Sections |
3 |
5 |
7 |
9 |
| Wing Beam |
N/A |
8” X 8” X 1/4” |
N/A |
8” X 8” X 3/4” |
| Tires - Transport & End Wheel |
11 L x 15 Highway |
11 L x 15 Highway |
12.5 L x 15 |
12.5 L x 15 |
| Transport Hitch Weight |
-300 lbs (upwards) |
| Transport Width |
14’ - 7” |
| Transport Height |
10’ - 6” |
| Trailer Frame |
4” x 8” x 1/4” |
| Rows of Tines |
5
|
| Tine Spacing |
18” Centers |
| Tine Section Frame |
2” x 4” x 3/16” |
| Tine Size |
5/8” x 26” Standard, Carbide Endura-Tip |
| Tine Replacement |
Easy Drop-Out Tine Bar |
| Hydraulics - Auto-Fold |
3-1/2” x 31” x 2” Rod |
| Hydraulics - Center Beam Lift (optional) |
3” x 8” x 1-1/4” Rod |
| Hydraulics - End Wheels (optional) |
2-3/4” x 8” x 1-1/4” Rod |
| Hydraulics - Tine Angle (optional) |
Re-Phasing(incremental sizes) |
| Tires - Main Cart |
16.5L x 16.1 |
Raking
The Strawmaster is quickly becoming the most popular
machine for raking flax straw. It can maximize holding
capacity by applying pressure through the spring bar
control.
machine for raking flax straw. It can maximize holding
capacity by applying pressure through the spring bar
control.
Ground Contouring
Under float or under pressure, the harrow sections are designed for flexibility. The torsion spring bars are positioned along the sides of the harrow frame providing an even distribution of pressure to the frame. The bars can then flex in response to counter pressure from the land contours with each section rising over hills and falling into hollows.
Strawmaster
KEEP IT SIMPLE
MINIMAL PARTS - MINIMAL MAINTENANCE The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.
MINIMAL PARTS - MINIMAL MAINTENANCE The patented spring bar technology is at the heart of every Strawmaster. The simple torsional spring bar design is unlike other heavy harrows. Strawmaster uses a spring bar system that lets you apply downward pressure to the harrow sections as you need it. These twin spring bars allow in-cab hydraulic control by applying pressure from zero to 1900 pounds per harrow section. If you don’t need pressure, just put it in float.
Easy, Drop-Out Tine Replacement
The tine bars easliy drop out by removing a few bolts making the replacement faster and easier.