Degelman 3500
Bulldozer Blades
Your Preferred Location
Features
-
FIND THE BLADE SERIES THAT'S RIGHT FOR YOU 40-150 HP 3500 Series 65-380 HP 4600/5700 Series 125-500 HP 5900 Series 200-500 HP 66/69/7200 Series 300-700 HP 7900 Hi-Lift Series: Designed to mount on popular utility tractors, this blade is a smaller version of the 4600 and 5700 Series. The 4600 and 5700 Series hydraulic angle blade attaches to both front-wheel assist and two-wheel drive tractors. The 5900 Series has all the features such as tilt, higher profile, D-lock® mid-mounting, and industrial skid shoes. Compatible with today’s high horse-power 4-wheel drive tractors, this series handles the most challenging jobs on your farm. 6600-Manual Angle 6900-Hydraulic Angle 7200-Hydraulic Angle & Hydraulic Tilt Developed specifically for producers moving silage and haylage, the 7900 can also take on the toughest snow removal jobs. With a lifting capacity of 40", a blade height of 47" tall, and an increased angle of 30° to eliminate spillover, the 7900 is backed with over 40 years of blade experience.
-
Top Extension Silage Extension High Volume Side Plate One-Foot Extension Bite Extension Rubber Cutting Edge Urethane Cutting Edge Max Temp® Steel: Top extension attachments are designed to maximize pushing capacity by preventing spillover. Our Degelman Silage Extensions are made from heavy-grade steel and are two feet high so you have maximum volume control. They’re also see-through for increased safety and efficiency. Whatever degree your blade is angled at, adding a High Volume Side Plate means you can dramatically improve the amount of volume you can push. It also decreases the amount of snow trailing off your blade so you move more snow with fewer passes. If you want a bigger blade, or if you add dual wheels to your tractor and want extensions as wide as your wheelbase, our One-Foot Extensions are the answer. Easy to add and as strong as the blade they’re attached to. Similar to our One-Foot Extension, our Bite Extension allows you to doze along curbs, foundations or silage container bunks and scrape material off without leaving a trail. Designed to be used either for slurry barns or for snow removal. The Rubber Cutting Edge essentially squeegees barn floors easily for maximum material pick-up. And for snow removal usage, the rubber edge means you can doze without fear of tripping on manhole covers. A harder material made for close scraping and removal of compact snow and ice. The Urethane Cutting Edge is a durable polymer that gives you three times the wear resistance of rubber while protecting you from tripping on manhole covers. Available for Strongbox only. MaxTemp steel is the same steel that’s used in industrial bulldozer blades. It’s made from hardened high carbon steel that’s strong and durable without being brittle. Made for dozing dirt, levelling roadways, gravel or snow.
-
Quick-Attach D-Lock® Mounting: The D-Lock® mounting system offers the convenience of quick attach/detach as well as long life. No tools are required. Fit-ups are 100% secure with zero movement. The blade can be removed in minutes by disengaging two points on the front axle brackets.
-
Degelman Industries has been engineering tough, high performance equipment for almost 60 years. The result is outstanding equipment that exceeds expectations and outperforms. We achieve this through meticulous design and vigilant customer service.: No two tractor manufacturers are alike, so we don’t develop a blade that is “one size fits all. Degelman engineers, designs and individually builds all Bulldozer Tractor fit-ups to ensure proper mounting locations are the best spot to push from - protecting your tractor investment. Featuring a Precision Machined Tubing Finish, Superior Seals and High Grade Wear Bands the Degelman series of Bulldozer Blades adds value and versatility to your tractor.
Quick-Attach D-Lock® Mounting
The D-Lock® mounting system offers the convenience of quick attach/detach as well as long life. No tools are required. Fit-ups are 100% secure with zero movement. The blade can be removed in minutes by disengaging two points on the front axle brackets.
40-150 HP 3500 Series
Designed to mount on popular utility tractors, this blade is a smaller version of the 4600 and 5700 Series.
Common Components
Many of the 3500 blade assemblies use common components in different configurations. Here are some basic descriptions of some common components.
3500
Designed for 40-150 horsepower 2WD tractors, skid steers, front-end-loaders and most front-wheel-assisted tractors, the 3500 series gives you the robust blade design Degelman is known for in a compact blade.
Benefit from 0° to 18° two-way hydraulic angling that allows you to choose any angle you want; our tool-less D-lock® Quick-Tach mounting system so one person can attach/detach the blade in minutes; double-skin construction and AR400 reversible skid shoes.
3500
Range of Motion
4-Way: Hydraulic Lift, Angle & Tilt
Rear Axle / Front Hook Mount
3500 Blades commonly mount using a front mounted hook and two rear axle brackets. The operator typically drives into the front hook, connects the hydraulics, hydraulically lifts the rear frame into position, and secures the "D-Lock" connections on the rear axle brackets. (46/5700 shown in illustration)
No Welding - Easy Bolt-On Assembly
Simple, Bolt-on brackets are all that is attached to your tractor. The rest of the assembly quickly attaches and detaches from these simple brackets. The brackets can also be removed if needed!
SPECIFICATIONS - 2WD & MFWA
| Dozer Series |
3500 |
| Tractor Horsepower Range |
40 - 150 hp |
| Tractor Type |
2WD & FWA |
| Blade Widths |
8', 9', 10', 12' |
| Blade Weight |
1,350 - 1,450 lbs |
| Blade Height (standard) |
27" |
| Blade Height (with top extension) |
32" |
| Blade Height (with silage extension) |
46" |
| Lifting Height (approx) |
20" |
| Lift Cylinders |
3" x 8" |
| Hydraulic Angle |
18° |
| Hydraulics - Angle |
2-1/2" x 16" |
| Hydraulic - Vertical Tilt |
n/a |
| Tilt Cylinders |
n/a |
| Cutting Edge (MaxTemp® Steel) |
5/8" x 6" |
| Digging Depth |
6" - 8" |
| Skid Shoes (abrasion resistant) |
Standard Adjustment |
| Mounting System |
D-lock® Quick-Tach |
| Mounting Location |
Rear Axle |
| Mouldboard (ripple formed blade) |
10 ga |