John Deere 995 Reversible Plow
Description
- Moldboard frame pivots with the bottoms
- Plastic moldboard and steel shins
- Landsides with wedges
- Front gauge wheels
Models
Rear gauge wheels come in standard equipment
995 Moldboard Plow rear gauge wheels
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
- Equipped with 6.70-15 tires for good flotation
- Easy turnbuckle adjustment on rear gauge wheel
- Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
Integral on-land hitch provides excellent maneuverability
Integral on-land hitch
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
- Category 3/3N Quik-Coupler compatible
- Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth to 356 mm (14 in.)
- Provides ample clearance between the tractor tires and the plow
V-style mainframe distributes weight for good penetration
995 mainframe
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
Moldboard frame pivots with the bottoms
Moldboard frame
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
- Requires less 3-point hitch capacity
- Requires less ballasting of the tractor front end
- Eliminates initial cost and service requirements for one complete set of standards and bottoms
Adjust front gauge wheels to limit plowing depth
Front gauge wheels
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.
Specifications
- Bottoms - Option 1: Plowing depth<br/>35.6 cm<br/>14 in.<br/>Steel moldboard
- Bottoms - Option 2: Plastic moldboard
- Clearances - Vertical: 81.3 cm<br/>32 in.
- Frame - Option 1: Thickness: 17.8x10.2x0.8 cm<br/>7x4x0.313 in.
- Hitch - Reversible: Type of reversing<br/>Hydraulic cylinder<br/>Yes
- Hitch - Steering: Integral, in-furrow<br/>No<br/>Integral, on-land<br/>Yes<br/>Semi-integral, on-land<br/>No<br/>Drawn, in-furrow<br/>No<br/>Drawn, on-land<br/>No<br/>Quick-coupler compatible<br/>Yes<br/>
- Hitch - Type: Category 3N or 3
- Horsepower required - Option 1: 5-bottom: 96.9-123 kW<br/>130-165 hp
- Horsepower required - Option 2: 6-bottom: 111.9-130.5 kW<br/>150-175 hp
- Horsepower required - Option 3: 7-bottom: 130.5-149.1 kW<br/>175-200 hp
- Horsepower required - Option 4: 8-bottom: 149.1-186.4 kW<br/>200-250 hp
- Key Specs - Horsepower required - Option 1: 5-bottom: 96.9-123 kW<br/>130-165 hp
- Key Specs - Option 1: 2.3 m<br/>7.5 ft
- Key Specs - Option 2: 2.7 m<br/>9 ft
- Key Specs - Option 2: 6-bottom: 111.9-130.5 kW<br/>150-175 hp
- Key Specs - Option 3: 3.2 m<br/>10.5 ft
- Key Specs - Option 3: 7-bottom: 130.5-149.1 kW<br/>175-200 hp
- Key Specs - Option 4: 3.7 m<br/>12 ft
- Key Specs - Option 4: 8-bottom: 149.1-186.4 kW<br/>200-250 hp
- Key Specs - Plowing depth: 35.6 cm<br/>14 in.
- No. of bottoms - Option 1: 5
- No. of bottoms - Option 2: 6
- No. of bottoms - Option 3: 7
- No. of bottoms - Option 4: 8
- Standards - Hydraulic: No
- Standards - Safety trip: Optional
- Standards - Shearbolt: Standard
- Standards - Spring reset: No
- Total width of cut - Option 1: <br/>2.3 m<br/>7.5 ft
- Total width of cut - Option 2: 2.7 m<br/>9 ft
- Total width of cut - Option 3: 3.2 m<br/>10.5 ft
- Total width of cut - Option 4: 3.7 m<br/>12 ft
- Weight (approximate) - Option 1: 1,678 kg<br/>3,700 lb
- Weight (approximate) - Option 2: 1,860 kg<br/>4,100 lb
- Weight (approximate) - Option 3: 2,041 kg<br/>4,500 lb
- Weight (approximate) - Option 4: 2,440 kg<br/>5,368 lb
Copy Set
Rear gauge wheels come in standard equipment
995 Moldboard Plow rear gauge wheels
Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:
- Equipped with 6.70-15 tires for good flotation
- Easy turnbuckle adjustment on rear gauge wheel
- Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
Integral on-land hitch provides excellent maneuverability
Integral on-land hitch
The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:
- Category 3/3N Quik-Coupler compatible
- Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth to 356 mm (14 in.)
- Provides ample clearance between the tractor tires and the plow
V-style mainframe distributes weight for good penetration
995 mainframe
The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.
The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.
Moldboard frame pivots with the bottoms
Moldboard frame
All 995 Moldboard Plows use only one set of bottoms.
The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:
- Requires less 3-point hitch capacity
- Requires less ballasting of the tractor front end
- Eliminates initial cost and service requirements for one complete set of standards and bottoms
Adjust front gauge wheels to limit plowing depth
Front gauge wheels
The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.