Sloan Implement

John Deere 975 Reversible Plow

John Deere
Make John Deere
Model 975
Type Vertical Tillage

Your Preferred Location

Description

  • Moldboard frame pivots with the bottoms
  • Safety-trip standards available to save time
  • Plastic moldboard and steel shins
  • Rear gauge wheel

Models

Moldboard frame pivots with the bottoms
975 mainframe 975 mainframe

All 975 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms
Reversing pin Reversing pin
#

The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.

Adjustable width of cut improves residue-handling ability
Adjustable width of cut Adjustable width of cut

The width of cut on all 975 Moldboard Plows can be set at 406 mm or 457 mm (16 in. or 18 in.) by moving the standards to different bolt holes in order to:

  • Match the tractor horsepower to the soil conditions
  • Improve the residue-handling ability
  • Improve productivity
  • Maximize fuel efficiency

The underframe clearance is 813 mm (32 in.) to allow excellent material flow through the plow.

Strong mainframe handles tough plowing jobs

The V-style mainframe is made of 152-mm x 102-mm (6-in. x 4-in.) welded tubular steel to handle the stress of tough plowing and reversing action as well as tight turns:

  • 5-mm (3/16-in.) thick on three-bottom plows
  • 8-mm (5/16-in.) thick on four- and five-bottom plows
Easily maneuver tight turns with integral in-furrow hitch
Integral in-furrow hitch Integral in-furrow hitch

Compatible with tractors equipped with Quik-Coupler, the integral hitch offers unexcelled maneuverability in turns and when parking in tight areas:

  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth is 356 mm (14 in.)
Adjustable rear gauge wheel comes in standard equipment
975 Moldboard Plow rear gauge wheel 975 Moldboard Plow rear gauge wheel

All 975 Moldboard Plows come with a rear gauge wheel included in standard equipment. The rear gauge wheel provides the following features:

  • Controls the plowing depth of the rear of the plow in rolling terrain
  • Stabilizes rear of the plow in soft soils
  • Adjustable through a full range of plowing depths
  • Designed for easy turnbuckle adjustment
  • Equipped with 6.70-15 tire to eliminate bulldozing in soft soils

Specifications

  • Bottoms - Option 1: Plowing depth<br/>35.6 cm<br/>14 in.<br/>Steel moldboard
  • Bottoms - Option 2: Plastic moldboard
  • Clearances - Vertical: 81.3 cm<br/>32 in.
  • Frame - Option 1: Thickness for 2- or 3-bottom: 15.2x10.2x0.478 cm<br/>6x4x0.188 in.
  • Frame - Option 2: Thickness for 4- or 5-bottom: 15.2x10.2x0.64 cm<br/>6x4x0.25 in.
  • Hitch - Reversible: Type of reversing<br/>Hydraulic cylinder<br/>Yes
  • Hitch - Steering: Integral, in-furrow<br/>Yes<br/>Integral, on-land<br/>No<br/>Semi-integral, on-land<br/>No<br/>Drawn, in-furrow<br/>No<br/>Drawn, on-land<br/>No<br/>Quick-coupler compatible<br/>Yes<br/>
  • Hitch - Type: Category 3N, 3, or 2
  • Horsepower required - Option 1: 2-bottom: 37.3-52.2 kW<br/>50-70 hp
  • Horsepower required - Option 2: 3-bottom: 52.2-70.8 kW<br/>70-95 hp
  • Horsepower required - Option 3: 4-bottom: 70.8-104.4 kW<br/>95-140 hp
  • Horsepower required - Option 4: 5-bottom: 96.9-123 kW<br/>130-165 hp
  • Key Specs - Horsepower required - Option 1: 2-bottom: 37.3-52.2 kW<br/>50-70 hp
  • Key Specs - Option 1: 0.63 to 0.91 m<br/>2.67 to 3 ft
  • Key Specs - Option 2: 1.2 to 1.4 m<br/>4 to 4.42 ft
  • Key Specs - Option 2: 3-bottom: 52.2-70.8 kW<br/>70-95 hp
  • Key Specs - Option 3: 4-bottom: 70.8-104.4 kW<br/>95-140 hp
  • Key Specs - Option 3: 1.6 to 1.8 m<br/>5.25 to 6 ft
  • Key Specs - Option 4: 2.0 to 2.3 m<br/>6.5 to 7.42 ft
  • Key Specs - Option 4: 5-bottom: 96.9-123 kW<br/>130-165 hp
  • Key Specs - Plowing depth: 35.6 cm<br/>14 in.
  • No. of bottoms - Option 1: 2
  • No. of bottoms - Option 2: 3
  • No. of bottoms - Option 3: 4
  • No. of bottoms - Option 4: 5
  • Standards - Hydraulic: No
  • Standards - Safety trip: Optional
  • Standards - Shearbolt: Standard
  • Standards - Spring reset: No
  • Total width of cut - Adjustment: Manual
  • Total width of cut - Option 1: <br/>0.63 to 0.91 m<br/>2.67 to 3 ft
  • Total width of cut - Option 2: 1.2 to 1.4 m<br/>4 to 4.42 ft
  • Total width of cut - Option 3: 1.6 to 1.8 m<br/>5.25 to 6 ft
  • Total width of cut - Option 4: 2.0 to 2.3 m<br/>6.5 to 7.42 ft
  • Weight (approximate) - Option 1: 408 kg<br/>900 lb
  • Weight (approximate) - Option 2: 544 kg<br/>1,200 lb
  • Weight (approximate) - Option 3: 771 kg<br/>1,700 lb
  • Weight (approximate) - Option 4: 1,043 kg<br/>2,300 lb

Copy Set

Moldboard frame pivots with the bottoms

975 mainframe 975 mainframe

All 975 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way rollover plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms
Reversing pin Reversing pin
#

The reversing pin is positioned at a 13.5-degree angle, instead of being straight up, for even plowing in both directions. The reversing pin does not require adjustments by the operator.

Adjustable width of cut improves residue-handling ability

Adjustable width of cut Adjustable width of cut

The width of cut on all 975 Moldboard Plows can be set at 406 mm or 457 mm (16 in. or 18 in.) by moving the standards to different bolt holes in order to:

  • Match the tractor horsepower to the soil conditions
  • Improve the residue-handling ability
  • Improve productivity
  • Maximize fuel efficiency

The underframe clearance is 813 mm (32 in.) to allow excellent material flow through the plow.

Strong mainframe handles tough plowing jobs

The V-style mainframe is made of 152-mm x 102-mm (6-in. x 4-in.) welded tubular steel to handle the stress of tough plowing and reversing action as well as tight turns:

  • 5-mm (3/16-in.) thick on three-bottom plows
  • 8-mm (5/16-in.) thick on four- and five-bottom plows

Easily maneuver tight turns with integral in-furrow hitch

Integral in-furrow hitch Integral in-furrow hitch

Compatible with tractors equipped with Quik-Coupler, the integral hitch offers unexcelled maneuverability in turns and when parking in tight areas:

  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth is 356 mm (14 in.)

Adjustable rear gauge wheel comes in standard equipment

975 Moldboard Plow rear gauge wheel 975 Moldboard Plow rear gauge wheel

All 975 Moldboard Plows come with a rear gauge wheel included in standard equipment. The rear gauge wheel provides the following features:

  • Controls the plowing depth of the rear of the plow in rolling terrain
  • Stabilizes rear of the plow in soft soils
  • Adjustable through a full range of plowing depths
  • Designed for easy turnbuckle adjustment
  • Equipped with 6.70-15 tire to eliminate bulldozing in soft soils

Contact

Contact

Consignment

Request a Service

×

Sloan Implement Employee Portal

×

Your session will expire in . If you want to reset this timer, please click OK.

Change Your Preferred Location


×

Sloan Implement Employee Portal