Description

Models

Tank capacity and design

The total capacity of the C650 is 22,905 L (650 bu), measured by conveying product into the tank. The front tank is dedicated for low rate applications and holds 1762 L (50 bu). The remaining three tanks in order of front to rear are 9162 L (260 bu), 4581 L (130 bu), and 7400 L (210 bu).

 

John Deere air cart tanks are solid molded polymer, known for superior corrosion resistance compared to steel while providing semi translucency allowing for visual verification of product level in day-time operation. Each tank is mounted in a cradle frame to eliminate interference between each other. The polymer material does not require weldments like on steel tanks. Weldments on steel tanks are prone to failure over time as the metal is fatigued under stress.

 

The improved top bevel design on tanks allow for greater capacity and meets the 22,905 L (650 bu) capacity without the need for shoveling product into the corners while conveyor filling.

 

Each tank has a wide, single opening, which means it is easy for access for the conveyor and entry to the tank. Inside each tank is a ladder for cleanout access. Ladders in the tanks have been designed so that material cannot build up on steps. Top rails have been capped and sloped to ensure product sheds from the surface. When cleaning out the cart, the tanks slope steeply at bottom for product to flow easily and each tank is accessible for fill and cleanout with the conveyor.

 

Tanks come equipped with digital pressure sensor, ultrasonic bin level sensing, and camera-ready harnesses mounted from the factory.

Wireless-controlled hydraulic conveyance system with low-profile hopper

The C650 Air Carts come standard with the wireless-controlled hydraulic conveyance system with a low-profile hopper. Maneuvering the conveyor can be done from the wireless conveyor remote or the remote tethered to the cart. With five pivot points on the arm, all tanks can be filled from one spot. The pivot points also allow the conveyor to be easily positioned and moved when filling from a seed tender.

 

This conveyor moves up to 3524 L (100 bu) of product in a minute with a 48.26-cm (19-in.) belt inside the 30.5-cm (12-in.) tube. By moving the hopper under meter, the conveyor can be used for clean out on each tank as well.

The shut-off switches on the conveyor are located at the bottom of the tube, above the hopper and at the top of the conveyor near the spout. Filling at night is easy with the light-emitting diode (LED) 900-lumen lights on the cart and conveyor conveniently placed to illuminate each meter, the stairway and platform.

Meter seed accurately with confidence

A meter cartridge at each tank effectively meters seed or fertilizer into the primary manifold. Air carries the material to the secondary distributor for delivery to the openers on the seeding tool.

 

Meters are contained in a cartridge for convenient removal and are color coded for easy identification.

A manual half-width disconnect is incorporated into the meter system:

• Allows one-half of the metering system to be manually shut off for irregular shaped headlands, point rows, etc. on mechanical drive carts.
• Allows the meter cartridge to be removed with material still in the tank(s).
• Allows tanks to be emptied with meter and primary manifold in place.

On the C-Series Air Carts, an electric actuator controls product flow from the tank to the meter housing:

• Allows complete shut off of product flow with little effort
• Allows the meter cartridge to be removed with material still in the tank(s)
• Allows tanks to be emptied with meter and primary manifold in place

Ultrasonic bin level sensing

The John Deere ultrasonic bin level sensing system will increase the accuracy of bin level read outs in the cab and on the cart side display compared to the paddle design. The accuracy of this system is within 10 percent of actual product in the tank. Product in the tank is measured utilizing high-frequency sound waves (ultrasonic) that are emitted from the unit and received back when they reverberate off the product in the tank. These sound waves generate a digital signal which can be mapped across the angle of repose for the product in the tank. Using calculus volume can be determined from the convex slope determined from the ultrasonic frequencies. When metering two products into one airstream, ultrasonic can improve the accuracy of detection up to 50 percent more than traditional paddle sensors.

Easy-to-operate tank lids

The C650 Air Carts have five tank lids to make filling convenient and quick. The three back tank lids are operated by pushing forward on the foot pedal and straight down on the handle. The lid slides out of the way, contouring the shape of the tank, so it does not interfere with the conveyor. The tank lids seal tight by pulling upward on the handle and stepping back on the foot pedal. The three back tank lids offer a wide opening, making an easy job out of placing the conveyor in the right place during fills. The design is a single per tank design, providing for faster fill times.

The front 1762-L (50-bu) tank has two options to make loading low rate products easier. If the grower is filling the tank with bags, the front lid is accessible from the lower platform of the cart. The two front railings of the cart can be removed to allow for a truck to bring bags directly to the platform. As pictured above, the bottom fill location of the front tank has a bag splitter.

 

To fill the front tank with a conveyor, the top tank lid is easily reached with the hydraulic conveyance system.

Take command of every acre and every input with SectionCommand™ system

SectionCommand is an effective, integrated, exclusive John Deere solution that reduces costly overlaps and skips that can waste seed and fertilizer, while offering more consistent fields that improve the potential of your yield and your bottom line.

 

Thanks to individual meter sections that control commodity flow, you can maintain the right application rates and row-to-row accuracy. This helps stimulate even crop emergence during the growing season and promotes consistent crop maturity at harvest. SectionCommand controls output from all meters on the cart up to eight sections.

 

Owner benefits include:

• Improved consistency of crop maturity at harvest
• Improved consistency during emergence and growing season
• Reduced seed input cost
• Reduced fertilizer input cost
• Increased time between fills due to input savings

SectionCommand is base equipment with optional deduct on all John Deere 1910 and C-Series Air Carts. Each tank and meter will receive SectionCommand components. A two-tank cart will control sections out of both tanks, a three-tank cart will control sections out of all three tanks, and the C-Series Air Carts will control sections out of all four tanks. SectionCommand is also available as an attachment for field conversion (AFC) for all 1910 hydraulic drive carts. See AFC kit story for more information.

 

SectionCommand controls seed and fertilizer output by closing and opening gates on the bottom side of the meter. When the gates are open, commodity is metered out, and when closed, commodity stays and continues to rotate within the meter. The meter stays full at all times so immediately when the gate opens, the commodity can flow into the primaries and out to the tool. Since each meter section has its own gate, application rates and row-to-row accuracy are not compromised. The gates are utilized to control commodity output on all sections. Once the last gate needs closed, the entire meter will stop turning, stopping product flow.

When commanded, electric over-hydraulic solenoids engage actuators to instantaneously close the gate for the needed section. The actuators are powered via hydraulics from the same circuit as the hydraulic drive motors. When power is cut, oil is diverted to retract the actuators and open the gates. The retraction is both powered and spring assisted, so it will always default to the seeding position. The oil from SectionCommand drains back through the fan motor case drain line and is coupled with an accumulator on the valve block to provide extra drainage capacity.

SectionCommand incorporates gate detection, which gives producers the satisfaction of knowing the gates are in position as commanded. Magnets on the back side of the gates are used in close proximity to the gate detection sensors to determine if the gates are open or closed. Should a gate not be in the commanded position, an alarm will alert the operator of the gate(s) in question. The blockage warning system works in conjunction with SectionCommand to give further confidence whether a given section is seeding or not when commanded.

For maximum performance, SectionCommand should be controlled through John Deere Section Control. Coupling SectionCommand with John Deere Section Control provides the ultimate in precision seeding and productivity. If a Section Control activation is held by the producer, that same activation can be utilized for SectionCommand.

 

SectionCommand introduces the orange roller, which has the same number of flutes and spacing as the blue roller, but shorter flutes. It is for use only with SectionCommand when seeding seeds larger than 6 mm (0.25 in.) in diameter (soybeans, chick peas, etc.). The orange roller is not for use with cereal grains or fertilizer.

SectionCommand equalizer

Due to the varying lengths of product delivery hose used across the drill, SectionCommand has a built-in equalizer feature to ensure consistent product delivery across the width of the drill when entering and exiting headlands. The software allows the producer to set the on/off product delivery times separately for the outermost opener and the innermost opener on the drill. Product delivery times are inputted for each tank on the cart, and the software creates a time delay for actuation of the gates.

 

Please see the Using SectionCommand video for more information.

Cart side display functions

The durable display on the side of the cart will make filling and calibration easier than before. Selecting the menu button on the far left will take the grower to the main menu where they can select:

• Tank: shows product weight and tank fill level
• Meter calibration: preform a bag calibration without going back and forth to the cab to make inputs on the Gen 4 CommandCenter™ display
• Info: shows display and software information
• Tank pressure: shows the differential pressure between the tank and the meter for each individual tank
• Monitor settings: allows the customer to adjust the brightness of the display

Tank weights and bin level will be shown on the first screen when the display is powered on. Navigating from one tank weight to another will be done by pressing the left and right arrow buttons.

Meter calibration can be done cart side. To select the tank or tanks that need to be calibrated, press the display button that matches the icon below the respective tank on the screen.

The digital screen replaces the mechanical tank pressure gauges on previous carts.

Camera ready - C650 Air Cart

Monitoring product levels in tanks has never been easier with the camera-ready feature of C-Series Air Carts. The carts come pre-wired to accept a camera in each tank and one off the rear of the machine. Monitoring product levels is especially reassuring when product levels are low. Cameras also provide the operator with visibility behind the cart when traveling down the road or backing into a shed.

For C-Series Air Carts, the producer can add up to five Voyager® or CabCAM™ cameras while also using a Generation 4 4600 CommandCenter™ Display or 4640 Universal Display. If the producer wants to view more than four cameras, a producer-purchased camera display will be needed.

 

NOTE: Generation 4 displays support Voyager and CabCAM cameras.

 

While the C-Series Air Carts come pre-wired to adapt cameras, additional harnesses are necessary for connecting to the tractor, and a tool overlay harness will be needed.  Please use the part numbers below for configuring an existing, compatible tool.

Air cart model/configuration	Display	Display harness	Display harness to air cart/seeder or tool overlay harness	Seeding tool overlay harness	CabCAM adapter	Notes
C650/C850 Tow Behind	4600 CommandCenter	AA93727 (one per camera) connected behind rear cab cover	AA94316	AA94564	Not required for Gen 4 display	Up to four CabCAM or Voyager cameras can be installed (four in tank, one rear view)
C650/C850 Tow Behind	4640 Universal Display	SWTY268456	AA94316	AA94564	Not required for Gen 4 display	Up to four CabCAM or Voyager cameras can be installed (four in tank, one rear view)
C650 Tow Between	4600 CommandCenter	AA93727 (one per camera) connected behind rear cab cover	AA94316		Not required for Gen 4 display	Up to four CabCAM or Voyager cameras can be installed (four in tank, one rear view)
C650 Tow Between	4640 Universal Display	SWTY268456	AA94316	AA97386	Not required for Gen 4 display	Up to four CabCAM or Voyager cameras can be installed (four in tank, one rear view)

 

 

CabCAM is a trademark of ATI Products, Inc. Voyager is a trademark of ASA Electronics, LLC.

 

 

John Deere ActiveCal™ system

The more frequently calibration is completed, the more accurate a seeder will be. A number of variables, including product weight and changing climate conditions throughout the day, will have an effect on any volumetric metering system; with the John Deere ActiveCal system, calibration can be done from the cab of the tractor, while seeding, to minimize the variation in product metering.

 

The process to calibrate the implement starts with the Gen 4 4600 CommandCenter™ Display in the work setup page, where the operator defines product types, rates and selects meter rollers. Based on information entered into the work setup page, a preconfigured meter displacement value (MDV) will populate per meter. An initial manual calibration will give the most accurate MDV to start with. However, the preconfigured MDV will be a good starting point for growers who do not wish to manually calibrate.

 

The operator engages ActiveCal while stationary by selecting the button on the screen and then begins seeding. When enough product has been metered out, typically after about 3.2 to 4.9 ha (8 to 12 acres), the Gen 4 CommandCenter will prompt the operator to stop when convenient to do so. At that time, the data points are calculated and a new MDV with percent difference is displayed on screen. The operator can accept or reject the new MDV. If accepted, the system automatically calibrates to the new MDV. If rejected, the system continues at the previously calibrated numbers.

Floatation and Compaction

The tow-behind C650 Air Cart comes equipped with rear dual Firestone® 800/70R38 SFT tires and front single Firestone 900/75R32 CFO tires. The tow-between C650 comes equipped with rear dual Firestone IF850/75R42 CFO tires. These are high-floatation, low-compaction solutions. The Firestone tires run at an inflation pressure of 131 kPa (19 psi). Super flexion tire (SFT) technology means that the sidewalls on the tire are developed with additional reinforcement and superior rubber compounds, which enables the tires to run at a very low pressure while under higher loads without damaging the sidewalls. By running at lower pressure, the tire can flex its sidewalls and squat, allowing for a much wider footprint and improving floatation.

 

 

To see how the tire pressures on the C-Series Air Carts compare to the 1910 Commodity Carts, please reference the tire pressure guide.

Mitas is a trademark of Mitas, Akciova Spolecnost Corporation. Firestone is a trademark of Bridgestone Americas Tire Operations, LLC.

Confidence in rates from row to row with RelativeFlow™ Blockage sensing

With the RelativeFlow blockage sensing, operators can see the flow rate of both seed and fertilizer from inside the tractor cab. Sensors on all primary towers and secondary hoses monitor the relative product flow, giving you a better view of the flow rate of both seed and fertilizer from the cart to the opener from inside your tractor cab. This exclusive technology can help you identify any problems before potential blockage occurs.

 

RelativeFlow Blockage is available on the following models:

• P540 - 12.2-m (40-ft)
• P556 - 17.1-m (56-ft)
• P576 - 23.2-m (76-ft)
• N500C - all widths
• 1890 - 15.2-m (50-ft) and 18.3-m (60-ft)
• N530F - 9.1-m (30-ft)
• N540F - 12.2-m (40-ft)
• N543F - 13.1-m (43-ft)
• N560F - 18.3-m (60-ft)

 

RelativeFlow Blockage is compatible with hydraulic drive carts for model year 2014 and newer 1910, model year 2013 and newer 550 Carts, C650 and C850 Air Cart.

 

Below are the GreenStar™ 3 2630 Display screens for the blockage monitoring system. For complete details and information, see the owner’s manual.

The RelativeFlow sensing chart shows the amount of flow through each sensor on the selected tower. Sensitivity for the blockage system can be adjusted if desired, as shown below.

Blockage warning sensitivity allows the producer to set and change the sensitivity of the sensors to meet their preferences. Increasing the sensitivity means the system is more likely to show a false blockage, while less sensitivity means the system is more likely to miss a blockage.

 

Multiple run-page alarm behavior options are available for selection.

Below are the Gen 4 display screens for the blockage monitoring system on the N500C.

 

For complete details and information reference, the owner’s manual.

The SeedStar™ system run page displays the five major run settings. Clicking on any of the tiles will take an operator to that specific page (shown below).

Blockage alarm delays can be set up by clicking on the advanced settings button from the blockage set-up screen.

• A blockage delay is how long a blockage should occur before an alarm is sounded.
• The blockage alarm reminder is how often the alarm should sound when a blockage occurs.
• The meter on delay is the time from when the meter is turned on until the blockage sensor should start monitoring for blockage.
• The meter off delay is the time from when the meter is turned off until the blockage sensor should start monitoring to verify no flow.

For more detailed information, see the owner’s manual.

 

Air tools with Relative Flow Blockage are not compatible with 1910 air carts with ground drive.

 

Specifications

• Capacity - Total: 22905 L<br/>650 bu
• Configuration - Tow behind: Tow-behind
• Conveyance - Belt width: 48.26 cm<br/>19 in.
• Conveyance - Low profile hopper: 183 cm X 76.2 cm X 23 cm<br/>72 in. X 30 in. X 9 in.
• Conveyance - Rate: 100 bu. per minute
• Conveyance - Tube diameter: 30.5 cm<br/>12 in.
• Dimensions - Height: Field - 16 ft. 3 in. (4.94 m)<br/>Transport - 13 ft. 4 in. (4.05 m)
• Dimensions - Length: 11.86 m<br/>38 ft. 11 in.
• Dimensions - Weight empty: 16,594 kg<br/>36,583 lb
• Dimensions - Width: 6.16 m<br/>20 ft. 2 in.
• Fan - Air hose: Primary: Stainless-steel 3 in. (7.62 cm)
• Fan - Air system type: B-type
• Fan - Diameter: 69.85 cm<br/>27.5 in.
• Fan - Drive: Hydraulic
• Fan - Maximum rpm: 550 lb. of seed per acre at 5.5 mph and 15 degree slope (300 lb. fertilizer and 250 lb. seed)
• Front tires - Standard: Singles - Two IF 900/75R32 CFO Firestone (12 psi)
• Key Specs - Drive type: Hydraulic
• Key Specs - First tank capacity: 1761 L<br/>50 bu
• Key Specs - Fourth tank capacity: 7400 L<br/>210 bu
• Key Specs - Maximum rpm: 550 lb. of seed per acre at 5.5 mph and 15 degree slope (300 lb. fertilizer and 250 lb. seed)
• Key Specs - Second tank capacity: 9162 L<br/>260 bu
• Key Specs - Third tank capacity: 4581 L<br/>130 bu
• Key Specs - Weight empty: 16,594 kg<br/>36,583 lb
• Meters - Drive type: Hydraulic
• Meters - Metering system: Five meter cartridges; 30 approved crops
• Monitoring - Standard: <br/>
• Rear tires - Standard: Dual Tires and Rims 800/70R38 SFT Firestone (15 psi)
• Tanks - First tank capacity: 1761 L<br/>50 bu
• Tanks - Fourth tank capacity: 7400 L<br/>210 bu
• Tanks - Quantity: Four Tanks
• Tanks - Second tank capacity: 9162 L<br/>260 bu
• Tanks - Third tank capacity: 4581 L<br/>130 bu

Features

• Capacity: 650 bu.
• Pull-Type: Tow-Behind

Copy Set