Description

Models

Improve seed placement accuracy from the cab with TruSet™ downforce control

TruSet downforce allows operators to set downforce pressures from inside the cab. Downforce can easily be changed by the push of a button as soil conditions very. Proper downforce is directly related to a consistent seeding depth, which leads to improved even emergence, plant density, and maturity.

TruSet system quick-reference guide

TruSet downforce settings:

A. Select to manually input a value

B. Select to increase or decrease the target force of the openers

C. Downforce toggle button: select to enable or disable the downforce

D. Indicates that the downforce is enabled

E. Indicates that the downforce is disabled

F. Indicates that the downforce is enabled but not applying

Electric drives enabling SectionCommand™ system

For the first time, meter sections are controlled with electric motors. Each meter section has its own electric drive motor. This eliminates the need for a variable-rate drive hydraulic motor or a ground drive wheel. This also enables the SectionCommand system and variable/prescription seeding.

Perscription/variable-rate seeding allows growers to apply the right amount of seed depending on predetermined management zones. Four-section SectionCommand has shown a potential seed savings of 4 to 6 percent depending on field size and shape.

Power generation

The electric motors are powered by a power take-off (PTO) power generation unit or an onboard hydraulic power generator. Growers can choose either of these options based on their tractor limitations. The on-board system utilizes power beyond, whereas the PTO system frees up hydraulic capacity on the tractor as the PTO powers the generator.

Improved meter access with new frame design

The tank on the N500C has been moved up and back to allow for better access to the meters. The blower fan has been relocated to the front of the tank to allow non-obstructed access to all four meters.

The updated tank design is also larger. The 9.15-m (30-ft) to 11-m (36-ft) models offer a 3523.9 -L (100-bu) tank. The 12.2-m (40-ft) and 12.8-m (42-ft) models offer a 4228.7-L (120-bu) tank.

Tank cleanout has also been improved. Producers can place a seed box or conveyer under the tanks to empty out excess seed. The tank has been designed so there is minimal seed left in the tank after it has been emptied.

Calibrating the meters has also been improved thanks to electric drive metering. The N500C is calibrated stationary similar to larger air carts. Catch bags are placed under each meter, and the meters turn a pre-determined amount of revolutions. Catch bags are weighted and entered into the SeedPlus app or on the Gen 4 display in order to generate a meter displacement value (MDV).

Generation 4 Display compatibility

This document lists all the compatible equipment approved with the software update 19-3 release and is subject to change with newer software updates. To ensure complete and proper compatibility, the most current version of implement control unit software, Generation 4 Display software, or compatible farm management information software (FMIS) should be used. Non-current software versions will require an update before support can be provided. Unapproved software version configurations will not be supported.

The software update 19-3 release is only compatible with 4600 CommandCenter™ v2 processors. Software update 17-2 is the last release that was compatible with 4600 v1 processors.

Server serial numbers are as follows:

• v1 = RWG prefix
• v2 = PCG prefix

Machine compatibility

John Deere Large Ag Tractors

John Deere Large Ag Tractors (list of all automatically detected machines)	Model year	CommandCenter		Universal Display
		4600 v2	4200	4640	4240
9R/9RT/9RX Series	2018 and newer	X	---	X	X
9R/9RT/9RX Series	2015-2017	*	---	X	X
9R/9RT Series	2012-2014	---	---	X	X
9030/9030T Series	2008 and newer	---	---	X	X
9020/9020T Series	2002-2007	---	---	X	---
9000 Series	1997-2001	---	---	X	---
9000T Series	2000-2001	---	---	X	---
8R/8RT Series	2018 and newer	X	---	X	X
8R/8RT Series	Mid-2014 - 2017	*	---	X	X
8R/8RT Series	2010-2013	---	---	X	X
8030/8030T Series	2006 and newer	---	---	X	X
8020/8020T Series	2002-2005	---	---	X	---
8010/8010T Series	2000-2002	---	---	X	---
8000 Series	1994	---	---	X	---
8000T Series	1997-1999	---	---	X	---
7R Series	2018 and newer	X	X	X	X
7R Series	2014-2017	*	---	X	X
7R Series	2011-2013	---	---	X	X
7J Series	2018 and newer	---	---	X	X
7030 Series	2007 and newer	---	---	X	X
7030 Series (Large Frame)	2007 and newer	---	---	X	X
7030 Series (Small Frame)	2006 and newer	---	---	X	X
7010 Series	1997-2003	---	---	X	---
7000 Series	1992-1996	---	---	X	---
6030 Series (Small Frame)	2006 and newer	---	---	X	X
6000 Series	1992-1998	---	---	X	---
6010 Series	1999-2002	---	---	X	---
6R Series	2018 and newer	X	X	X	X
6R Series (Final Tier 4)	2015-2017	*	---	X	X
6R Series (Interim Tier 4)	2013-2015	---	---	X	X
6M Series	2013 and newer	---	---	X	X
6J Series	2018 and newer	---	---	X	X
5R Series	2019 and newer	---	---	X	X

*NOTE: For latest Precision Ag functionality, update machines equipped from the factory with v1 processor to v2.

John Deere Nutrient Applicators

John Deere Nutrient Applicators	Model year	CommandCenter		Universal Display
		4600 v2	4200	4640	4240
F4365 High-Capacity Nutrient Applicator	2017 and newer	X	---	---	---

John Deere Self-Propelled Sprayers

John Deere self- propelled sprayers	Model year	CommandCenter		Universal Display
		4600 v2	4200	4640	4240
4 Series Sprayers	2018 and newer	X	---	---	---
4 Series Sprayers	2013 - 2017	---	---	X	---
4940	2012 - 2014	---	---	X	---
4630	2008 and newer	---	---	X	---
4730	2008 and newer	---	---	X	---
4830	2008 - 2014	---	---	X	---
4930	2008 - 2013 (SN 4000+)	---	---	X	---
Hagie™ sprayers	2014 and newer	Compatible with GreenStar™ 3 2630 Displays and 4640 Universal Displays*

*NOTE: When using the 4640 Universal Display on a Hagie Sprayer, additional mounting and harnessing may be required.

• 4640 Ram™ Mount - SJ34503
• 4640 power/video harness - BPF11527 (1-3 video plus machine power), PF90687 (machine power only)

NOTE: Current John Deere/Hagie field kits only offer GreenStar 3 2630 Display parts.

NOTE: AutoTrac™ Vision/AutoTrac RowSense and multi-rank section control are not supported on Hagie at this time.

NOTE: VIN detection on Hagie Sprayers is only supported on model year 2019 and newer machines.

John Deere Self-Propelled Forage Harvesters (SPFH)

John Deere Self-Propelled Forage Harvesters	Model year	CommandCenter		Universal Display
		4600 v2	4200	4640	4240
9000 Series SPFH	2019 and newer	---	---	X	---
8000 Series SPFH	2015 and newer	---	---	X	---

John Deere Cotton Harvesters

John Deere Cotton Harvesters	Model year	CommandCenter		Universal Display
		4600 v2	4200	4640	4240
CP690	2015 and newer	---	---	X	---
CS690	2015 and newer	---	---	X	---

NOTE: Update cab controller software to the latest version on model year 2017 and newer cotton harvesters to use Harvest Identification, Cotton Pro.

NOTE: AutoTrac RowSense is not supported with CP690/CS690 Cotton Harvesters with 4640 Universal display. 

Equipment compatibility

John Deere planters

SeedStar™ 4HP planters are only compatible with 4600 CommandCenter displays with a version 2 (v2) processor and 4640 Universal Displays. Displays should be running Generation 4 OS software version 10.10.404-390 or newer and the most current version of tractor applications to be compatible with SeedStar 4HP planter applications. Additionally, dual-display mode is available for use with SeedStar 4HP planter applications, along with Generation 4 Extended Monitor. SeedStar 4HP planters are compatible with no more than two GreenStar Rate Controllers.

The SeedStar 2 configuration below is available only on factory-installed model year 2011 and newer planters and may be field-installed on model year 2009 and 2010 planters. Green PM/PA controllers (factory-installed on model year 2009 and 2010 planters) are not supported with a Generation 4 display.

A Service ADVISOR™ tool (available at a John Deere dealer) is needed to update SeedStar 2, SeedStar XP, and SeedStar 3 HP software. Documentation is not supported when using a rate controller to control row clutches on a John Deere planter.

 

John Deere planters	Control unit name	Software version (or newer)	CommandCenter		Universal Display
			4600 v2	4200	4640	4240*
SeedStar 2	Black PM1	22.0	X	X	X	X
	Black PA1, (if available PA 2)	22.0	X	X	X	X
	Green PM1	10.11	---	---	---	---
	Green PA1 (if available PA 2)	10.11	---	---	---	---
SeedStar XP	Black PM1	22.0	X	X	X	X
	Black PA1, (if available PA 2)	22.0	X	X	X	X
	PM2	7.0	X	X	X	X
SeedStar 3 HP	Planter Main A (PCMA)	6.0	X	X	X	X
	Planter Main B (PCMB or MMC)	8.0	X	X	X	X
	Row-unit Controller (RUC)	2.0	X	X	X	X
	EPG	3.0	X	X	X	X
SeedStar 4HP	Planter Apps	10.4.332-12	X	---	X	---
	Planter Main A (PMCA)	6.0	X	---	X	---
	Planter Main B (PMCB or MMC)	8.0	X	---	X	---
	Row-unit Controller (RUC)	3.0	X	---	X	---
	Electrical Power Generation (EPG)	5.0	X	---	X	---
	Electrical Power Module, 2 (PC2)	3.0	X	---	X	---

*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.

John Deere Air Seeders

The C850 Air Cart requires a 4600/4200 CommandCenter Display or a 4640/4240 Universal Display. GreenStar 3 2630 monitors are not supported. Additionally, C850 Air Carts and AutoTrac Implement Guidance (passive) are compatible with software update 18-2 and newer.

 

John Deere Air Seeder	Model year/control unit name	Software version (or newer)	CommandCenter		Universal Display
			4600 v2	4200	4640	4240*
C850 Air Cart	Cart Master Controller (CMC)	13	X	X	X	X
	Mini Tank Controller (TXC)	6	X	X	X	X
	Front, Middle, Rear Tank Controller (TCU)	6	X	X	X	X
1870 Seeding Tool - TruSet™ system	2017 and newer (IDC)	5.0	X	X	X	X
1870 Seeding Tool - RelativeFlow™ blockage sensors	2017 and newer (BMU)	5.0	X	X	X	X
1910 Air Cart - ground drive	2009 and newer	3.0	X	X	X	X
1910 Air Cart - hydraulic drive	2013 and newer	9.0	X	X	X	X
Seeding tools with air-run blockage - primary blockage	2009 and newer (BMU)	12.0	X	X	X	X
Seeding tools with air-run blockage - air-run blockage	2009 and newer (BMU)	12.0	X	X	X	X
	Member Module	5.0	X	X	X	X
1990 Central Commodity System (CCS™)	2009 and newer (BMU)	12.0	X	X	X	X
N500C Series	Seeding apps	10.2.18-31	X	---	X	---
	SMCA or SMC	3.0	X	---	X	---
	SMCB or BMU	3.0	X	---	X	---
	EPG	3.0	X	---	X	---

*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.

John Deere Tillage

John Deere Tillage	Control unit name	Software version (or newer)	CommandCenter		Universal Display
			4600 v2	4200	4640	4240
AccuDepth™ cultivator	Implement Depth Control (IDC)	11	X	X	X	X
2730 with TruSet	Tillage Controller 1 (TC1)	2.66K9	X	X	X	X
2230 with TruSet	Tillage Controller 1 (TC1)	2.75K6	X	X	X	X
2330 with TruSet	Tillage Controller 1 (TC1)	2.35K6	X	X	X	X
2620/2630 with TruSet	Tillage Controller 1 (TC1)	2.95K6	X	X	X	X
2720 with TruSet	Tillage Controller 1 (TC1)	2.24K6	X	X	X	X
2660VT with TruSet	Tillage Controller 1 (TC1)	3.03K12	X	X	X	X
2430 with TruSet	Tillage Controller 1 (TC1)	2.14K4	X	X	X	X
2510H with TruSet	Tillage Controller 1 (TC1)	2.85K5	X	X	X	X

*NOTE: For implements requiring ground speed input (radar), utilizing a 4240 Universal Display may require an additional 4240 Radar speed kit.

John Deere Round Balers

 

John Deere Round Balers	Control unit name	Software version (or newer)	CommandCenter		Universal Display
			4600 v2	4200	4640	4240
0 Series	Baler Automation	10.07	X	X	X	X
9 Series Premium	Baler Automation	7.16	X	X	X	X
V451R/V461R	Baler Automation	11.5	X	X	X	X

 

 

John Deere Combines

John Deere combines	Model year	CommandCenter		Universal Display
		4600 v2	4200	4640	4240
S700 Series	2018 and newer	X	---	---	---
S430 and S440	2017 and newer	X	---	---	---
S600 Series	2012 - 2017	---	---	X	X
S540 and S550 Series	2012 and newer	---	---	X	X
T-Series	2012 and current	---	---	X	X
70 Series	2008 - 2013	---	---	X	X

NOTE: Competitive equipment may be compatible with 4640 Universal Display and 4240 Universal Display. For additional compatibility information, contact a John Deere dealer.

John Deere Large Square Balers

John Deere Large Square Balers Including Harvest Tec applicator and PhiBer accumulator	Control unit name	Software version (or newer)	CommandCenter		Universal Display
			4600 v2	4200	4640	4240
0 Series	Gen 4 VT	3.04	X	X	X	X
1 Series	Gen 4 VT	5.07	X	X	X	X

Precision Ag Technology software compatibility

John Deere control units	Control unit name	Software version (or newer)	CommandCenter		Universal Display
			4600 v2	4200	4640	4240
*StarFire 6000 Receiver	---	4.20N	X	X	X	X
StarFire 6000 Integrated Receiver	---	4.20N	X	X	X	X
StarFire 3000 Receiver	---	2.70A	X	X	X	X
*Modular Telematics Gateways (MTG) - 3G	---	21.03	X	X	X	X
*MTG - 4G	---	26.04.001	X	X	X	X
GreenStar Rate Controller	---	3.70K	X	X	X	X
GreenStar Rate Controller Dry	---	2.11A	X	X	X	X
*John Deere Rate Controller 2000	---	1.13A	X	X	X	X
*AutoTrac Universal 200	---	2.30A	---	---	X	X
*AutoTrac Universal 300	---	3.23G	---	---	X	X
AutoTrac Controller 250	---	11933B	---	---	X	X
*AutoTrac Controller - Deere	---	1.11B	---	---	X	X
AutoTrac Controller - Raven	---	10.13.909-158	---	---	X	X
AutoTrac Controller - Reichhardt®	---	SW 1.3	---	---	X	X
AutoTrac RowSense™	RG3	AKK15783F	X	---	X	---
AutoTrac Vision	VGC	4.01V	X	---	X	---
AutoTrac Turn Automation	---	19-2	X	---	X	---
AutoTrac Implement Guidance	---	19-2	X	---	X	---
Active Implement Guidance (VT)	Application Controller 1100	2.71X	X	X*	X	X*
	Application Controller 1100 (S.N. PCXL01C201000-)	3.11A	X	X*	X	X*
iGrade™	Application 1100	2.71X	X	X	X	X
	Application Controller 1100 (S.N. PCXL01C201000-)	3.11A	X	X	X	X
Distance Trip	Application 1100	2.71X	X*	X	X	X
	Application Controller 1100 (S.N. PCXL01C201000-)	3.11A	X*	X	X	X
Yield Documentation, Specialty Crop	Application Controller 1120	1.51W	X	X	X	X
	Application Controller 1120 (S.N. PCXL02C201000-)	3.11A	X	X	X	X
Mobile Weather	Application Controller 1120	1.51W	X	X*	X	X*
	Application Controller 1120 (S.N. PCXL02C201000-)	3.11A	X	X*	X	X*
Harvest Identification, Cotton	Application Controller 1120	1.51W	---	---	X	---
	Application Controller 1120 (S.N. PCXL02C201000-)	3.11A	---	---	X	---
Gen 4 Extended Monitor			X	---	X	---
Wireless Data Server	Wireless Data Server	1.564.1 (Planting) 7.564.1 (Application) 2.573.1 (Harvesting)	X	---	X	---
Mobile Data Transfer	MyTransfer™ app	3.8.6 (iOS®) 3.8.5 (Android™)	X	X	X	X
Connect Mobile app	Connect Mobile app	8.3.0 or newer	X	---	X	---
Connect Mobile server	Connect Mobile server	2.3.101-1	X	---	---	---
Manure Constituent Sensing	Manure Controller	19.06	X	---	X	---

*NOTE: See additional information below.

StarFire Receivers

StarFire Receivers can be updated in the following ways:

• Receiver USB port (available only for StarFire 6000 Receivers)
• Generation 4 display USB port
• Remote software updates application (in ISOBUS VT app)

Additionally, StarFire iTC Receivers are no longer supported with software update 2017-1 and newer software. StarFire 6000 Receivers require software version 3.80F or higher when used with AutoTrac Implement Guidance.

John Deere Operations Center

To use RDA on a Generation 4 CommandCenter Display with a GreenStar 3 2630 Display connected in the same machine, GreenStar 3 2630 software version 3.22.1095 (SU2014-1) or higher is required (for 4600 CommandCenter Display and 4640 Universal Display only).

GreenStar Rate Controller and GreenStar Rate Controller Dry

GreenStar Rate Controller Dry is supported with display software update 2017-2 and newer. The 4600 and 4200 CommandCenter Displays and 4640 and 4240 Universal Displays support documentation and section control of up to five GreenStar Rate Controller units.

To update the GreenStar Rate Controller and GreenStar Rate Controller Dry, utilize a Generation 4 Display USB port. John Deere dealers can also utilize Service ADVISOR. GDC 2.11A was the last software version available through Software Manager. GDC 2.20A has been available since spring 2015 and contains diagnostic language updates. This software can only be obtained through Service ADVISOR.

John Deere Rate Controller 2000

The Generation 4 Displays and John Deere Rate Controller 2000 can support documentation and control up to five operations. ISO controllers such as SeedStar or TruSet can be used alongside a John Deere Rate Controller 2000 that is documenting additional operations. The John Deere Rate Controller 2000 will not control the planter clutches or half-, third-, or quarter-width disconnects on a John Deere planter.

AutoTrac™ Vision

AutoTrac Vision Guidance Camera 19-1 software 4.01V is only compatible with RowGuidance 3 Controller software AKK15783F and GreenStar 3 2630 17-1 software 3.34.1345 or newer and Generation 4 18-1 software 10.10.404-345 or newer. 

AutoTrac Universal 200, AutoTrac Universal 300, and AutoTrac Controller

AutoTrac Universal 200, AutoTrac Universal 300, and AutoTrac Controllers are for use with the 4640 Universal Display and 4240 Universal Display. Please see a John Deere dealer for exact model compatibility.

ISOBUS implements

Generation 4 Displays are compatible with one Agricultural Industry Electronics Foundation (AEF) certified ISOBUS implement; AEF-certified ISOBUS implements with Task Controller Section Control (TC-SC) functionality and AEF certification for TC-SC include sprayers, fertilizer spreaders, planters, seeders, manure applicators, etc. For third-party FMIS compatibility, reference the John Deere Operations Center.

A software update performed by an authorized ISOBUS implement dealer may be required to obtain compatible software. ISOBUS implements must be certified through the Agricultural Industry Electronics Foundation (AEF) to be recognized by the Generation 4 CommandCenter display. Visit www.aef-online.org for more information; visit www.aef-isobus-database.org for an active list of compatible implements.

ISOBUS implements with VT4 are now supported by Generation 4 Displays. Generation 4 Displays still support older VT versions (example: VT2 and VT3). If an implement is not loading after updating to Generation 4 software update 2017-2 (or newer on 4600 CommandCenter v2 processors), it is recommended that the implement manufacturer be contacted to get a software version that is either VT3 or VT4.

Extended monitor

When using an extended monitor with equipment visualized in ISOBUS VT Viewer and applying VT run page modules to two run pages shown at the same time, the extended monitor’s VT modules will not update. To mitigate this, only view VT modules on one run page at a time.

Implements without controllers

Implements without controllers can be documented as a stand-alone operation or with a rate controller from John Deere. Additionally, multiple implements without controllers cannot be documented together.

AutoTrac Implement Guidance (passive)

AutoTrac Implement Guidance is compatible with SeedStar 4HP, SeedStar 3HP, SeedStar 2, and SeedStar XP.

AutoTrac Implement Guidance is compatible with C850 Tow-Behind Air Carts with software update 18-2.

AutoTrac Implement Guidance is not compatible on 4240 Universal Displays for shared signal applications.

AutoTrac Turn Automation

To use the AutoTrac Turn Automation application, specific compatibility is required. AutoTrac Turn Automation is compatible with the following machines:

• 8030 Series Tractors
• 9030 Series Tractors (if equipped with PowerShift™ transmission)
• Model year 2012 and newer 6R Tractors (if equipped with Infinitely Variable Transmission [IVT™] and ITEC™ functionality)
• Model year 2011 and newer 7R Tractors (if equipped with CommandQuad™ transmission, e23™ PowerShift transmission, or IVT)
• Model year 2010 and newer 8R/RT Tractors
• Model year 2012 and newer 9R/RT/RX Tractors

NOTE: Integrated tractor IMS must be turned off on 30-Series Tractors to use AutoTrac Turn Automation on the Generation 4. Integrated Tractor iTEC must be turned off on the following tractors to use AutoTrac Turn Automation on the Generation 4:

• Model year 2012-2014 6R
• Model year 2011-2013 7R
• Model year 2010-2013 8R
• Model year 2012-2014 9R

NOTE: If instead an operator chooses to use the machine’s integrated IMS/iTEC functionality, then AutoTrac Turn Automation and iTEC must be turned off in the Generation 4 Universal Display.

AutoTrac Turn Automation is compatible with SeedStar 4HP, SeedStar 3HP, SeedStar 2, and SeedStar XP.

Reprogramming Application Controllers 1100 and 1120

CommandCenter 4600 v1 does not support reprogramming on the UCC2 version of Application Controller 1100 and 1120. Service ADVISOR or compatible displays may be used.

Distance Trip documentation

A UCC2 Application Controller 1100 with 19-2 software running on a 4600 CommandCenter v2 server enables documentation of field operations. If a UCC2 replaces a UCC1 Application Controller 1100 on a CommandCenter v1 server, documentation is not available. Refer to Tech Manual Bulletin 137919 to determine server type.

Yield Documentation, Specialty Crop

Load Documentation is display only and is not supported in Operations Center.

Camera compatibility

Voyager® cameras are supported on Generation 4 Displays. All other camera types are not supported.

Non-John Deere Precision Ag

4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 18-2 and newer:

• Global positioning system (GPS) receivers with serial port connection
  • Will not enable AutoTrac guidance functionality
• Raven RS-232 control units (440, 450, or 660) on tractors configured as implement-based applications
• Generation 4 displays are not compatible with the DN345 Drawn Dry Spreader at this time.

4600 CommandCenter v2 and the 4640 Universal Display are compatible with the following RS-232 configurations with software update 19-3 and newer:

• Yara N-Sensor®
• Fritzmeier
• Trimble® GreenSeeker®

Machine Communication Radio (MCR)

Generation 4 displays are not compatible with MCR.

APEX™ software

• Generation 4 display work data is not compatible with and cannot be viewed in APEX software.
• USB files including pre-assigned APEX tasks and iTEC Pro sequences will not import into Generation 4 displays.

NOTE: Gen 4 data is only compatible with the John Deere Operations Center. All Gen 4 activations are machine specific and cannot be transferred to a different machine. If not using WDT, an 8- to 32-GB USB is required to transfer data to and from the Gen 4 Display. Implement settings are display specific and cannot be imported or exported from the Gen 4 Display.

RAM is a trademark of National Products Inc. Hagie is a trademark of Hagie Manufacturing Company, LLC and similar to John Deere branded equipment, John Deere will support Hagie equipment. Reichhardt is a trademark of Reichhardt GmbH Steuerungstechnik. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc. Android is a trademark of Google LLC. Voyager is a trademark of ASA Electronics, LLC. Trimble and GreenSeeker are trademarks of Trimble, Inc.

Integration advantages of Deere tractor, cart, tool and technology

To win big in small grains, it takes a seeding solution that superseeds your expectations. John Deere delivers with a complete line of everything you need – and the sizes you want – to seed for success. Air-hoe drills. Commodity air carts. No-till air drills. Openers. Fertilizer attachments. Central commodity systems. Box drills. Plus precision ag technology to stretch your productivity to higher levels. But it’s far more than iron and technology. It’s the exceptional agronomic know-how and unsurpassed dealer support in all phases of production to keep you running. With our latest additions to equipment and openers, our seeding solutions deliver the next-generation performance you need to help you reach the full potential of each seed. That’s our commitment to you.

Versatile machine configurations

The N500C is designed for no-till seeding. The N500C with SeedMetering2 offers accurate volumetric metering in a compact tank-mounted-on-frame design, with the convenience of the Central Commodity System (CCS™) bulk-fill capabilities.

 

The N500C is available in single- or dual-rank designs, with 9.15-m, 11-m, 12.2-m, and 12.8-m (30-ft, 36-ft, 40-ft, and 42-ft) working widths. The single-rank N500C is available in 38.1-cm (15-in.) row spacing, making for a highly productive soybean seeding machine, while the dual-rank models are available in 19-cm or 25.4-cm (7.5-in. or 10-in.) row spacings. The dual-rank models also feature an optional dual row spacing package, which allows them to seed in their standard spacing or lock-up one rank and seed in 38.1-cm or 50.8-cm (15-in. or 20-in.) row spacings.

 

The productivity of the CCS comes standard with the N500C. The CCS bulk-fill tanks feature 3523.9-L (100-bu) capacity on the 9.15-m (30-ft) to 11-m (36-ft) models. The 12.2-m (40-ft) and 12.8-m (42-ft) models offer 4228.7 L (120 bu) of capacity to allow operators to seed more acres before stopping to refill.

 

The N500C features the Pro-Series™ No-Till Openers. With well over one million no-till openers in the field today, this proven opener offers accurate seed placement with the exclusive active hydraulic downforce ground-following system while minimizing moisture loss with its low-disturbance opener design.

SeedPlus™ mobile app

Tank scale weights and meter calibrations can be completed from an Android™ or iOS® mobile device anywhere around the machine.

Tank scale weights can be viewed anywhere within 15.2 m (50 ft). The SeedPlus app can also be used to calibrate the tank scales as needed.

Initial meter calibration

Select the meters that toned to be calibrated. Calibrations are recommended every morning or when crops/seed sizes are changed.

Follow the on-screen prompts to complete the calibration.

Once the catch bags are in place, hold down the meter calibration switch until the number of revolutions is complete.

Enter the weights of the bags into the app.

The SeedPlus app will calculate MDV based on the number of revolutions and the product weights. Operators can choose to accept the proposed MDV values or not.

 

Android is a trademark of Google LLC. iOS is a trademark of Cisco Technology, Inc. used under license by Apple Inc.

Calibrate from the cab with the John Deere ActiveCal™ system

The more frequently you calibrate your seeding equipment, the more accurate it will be. With ActiveCal, available only from John Deere on the N500C and C-Series Air Carts, you can do all the calibration from your cab to minimize variation in product metering. It takes only minutes, so there’s no need for back-and-forth trips to the cart. ActiveCal is designed to recalibrate itself throughout your work day to give you confidence in changing product weight and weather conditions.

 

A number of variables, including product weight and changing climate conditions throughout the day, will have an effect on any volumetric metering system; with the John Deere ActiveCal system, calibration can be done from the cab of the tractor, while seeding, to minimize the variation in product metering.

 

The process to calibrate the implement starts with the Gen 4 4600 CommandCenter™ Display in the work setup page, where the operator defines product types, rates and selects meter rollers. Based on information entered into the work setup page, a preconfigured meter displacement value (MDV) will populate per meter. An initial manual calibration will give the most accurate MDV to start with. However, the preconfigured MDV will be a good starting point for growers who do not wish to manually calibrate.

 

The operator engages ActiveCal while stationary by selecting the button on the screen and then begins seeding. When enough product has been metered out, typically after about  3.2 to 4.9 ha (8 to 12 acres), the Gen 4 CommandCenter will prompt the operator to stop when convenient to do so. At that time, the data points are calculated and a new MDV with percent difference is displayed on screen. The operator can accept or reject the new MDV. If accepted, the system automatically calibrates to the new MDV. If rejected, the system continues at the previously calibrated numbers.

Get into the field sooner and stay longer with high floatation tires

The N500C offers 33x15.5R16.5 tires standard on all machines, resulting in better floatation and less compaction and allowing operators to get into the field sooner and stay in the field longer. The mainframe is also equipped with walking beams to allow for better ground following.

Option code	Width	Mainframe front tire size	Number of tires	Mainframe rear tire size	Number of tires	Wing frame tire size	Number of tires
3610	All	33x15.5R16.5	4	33x15.5R16.5	4	31x13.5R15	4
3611	All	33x15.5R16.5	4	33x15.5R16.5	4	31x13.5R15	8
3612	9.5/11-m (30/36-ft)	33x15.5R16.5	4	500/40R16.5	4	33x15.5R16.5	8
3613	12.2/12.8-m (40/42-ft)	500/40R16.5	4	500/40R16.5	4	33x15.5R16.5	8

Confidence in rates from row to row with RelativeFlow™ Blockage sensing

With the RelativeFlow blockage sensing, operators can see the flow rate of both seed and fertilizer from inside the tractor cab. Sensors on all primary towers and secondary hoses monitor the relative product flow, giving you a better view of the flow rate of both seed and fertilizer from the cart to the opener from inside your tractor cab. This exclusive technology can help you identify any problems before potential blockage occurs.

 

RelativeFlow Blockage is available on the following models:

• P540 - 12.2-m (40-ft)
• P556 - 17.1-m (56-ft)
• P576 - 23.2-m (76-ft)
• N500C - all widths
• 1890 - 15.2-m (50-ft) and 18.3-m (60-ft)
• N530F - 9.1-m (30-ft)
• N540F - 12.2-m (40-ft)
• N543F - 13.1-m (43-ft)
• N560F - 18.3-m (60-ft)

 

RelativeFlow Blockage is compatible with hydraulic drive carts for model year 2014 and newer 1910, model year 2013 and newer 550 Carts, C650 and C850 Air Cart.

 

Below are the GreenStar™ 3 2630 Display screens for the blockage monitoring system. For complete details and information, see the owner’s manual.

The RelativeFlow sensing chart shows the amount of flow through each sensor on the selected tower. Sensitivity for the blockage system can be adjusted if desired, as shown below.

Blockage warning sensitivity allows the producer to set and change the sensitivity of the sensors to meet their preferences. Increasing the sensitivity means the system is more likely to show a false blockage, while less sensitivity means the system is more likely to miss a blockage.

 

Multiple run-page alarm behavior options are available for selection.

Below are the Gen 4 display screens for the blockage monitoring system on the N500C.

 

For complete details and information reference, the owner’s manual.

The SeedStar™ system run page displays the five major run settings. Clicking on any of the tiles will take an operator to that specific page (shown below).

Blockage alarm delays can be set up by clicking on the advanced settings button from the blockage set-up screen.

• A blockage delay is how long a blockage should occur before an alarm is sounded.
• The blockage alarm reminder is how often the alarm should sound when a blockage occurs.
• The meter on delay is the time from when the meter is turned on until the blockage sensor should start monitoring for blockage.
• The meter off delay is the time from when the meter is turned off until the blockage sensor should start monitoring to verify no flow.

For more detailed information, see the owner’s manual.

 

Air tools with Relative Flow Blockage are not compatible with 1910 air carts with ground drive.

 

Specifications

• Additional information - Date collected: 1 March 2019
• Additional information - Fast start/Quick start: Standard
• Additional information - Four-section seed on/off: Standard
• Additional information - Implement harness connection, 12 VDC: 7-pin SAE, 9-pin ISO
• Additional information - Implement harness connection, 56 VDC: Power take-off (PTO) power gen
• Additional information - Operator interface: Description: QT / Gen 4<br/>Language: English, Spanish, English/Spanish, English/French
• Additional information - Seed blockage sensor per row: Standard
• Additional information - Tool-mounted alternator: 56 VDC<br/>Optional: 56 VDC
• Dimensions - Available ballast: 800 lb
• Dimensions - Centerframe width: N530C and N536C - 3.5 m (11.4 ft)<br/>N540C and N542C - 4.6 m (15.2 ft)
• Dimensions - Centerline of mainframe wheel support tube to centerline of wing wheel support tubes: N530C - 7.85 ft (2.4 m)<br/>N536C -7.85 ft (2.4 m)<br/>N540C -10.4 ft (3.2 m)<br/>N542C - 10.4 ft (3.2 m)
• Dimensions - Clearance from rank to rank: 134 cm<br/>52.8 in.
• Dimensions - Frame: Cross members<br/>102x152 mm<br/>4x6 in.<br/>End tubes<br/>51x152 mm<br/>2x6 in.<br/>Hitch<br/>254x152 mm<br/>10x6 in.<br/>
• Dimensions - From ground to platform: ? 220 cm<br/>85 in.
• Dimensions - From ground to top of lid: N530C and N536C - ? 320 cm (126 in.)<br/>N540C and N542C - ? 310 cm (122 in.)
• Dimensions - From ground to top of lights: N530C and N536C - ? 320 cm (126 in.)<br/>N540C and N542C - ? 310 cm (122 in.)
• Dimensions - From ground to top of safety rail: ? 322.6 cm<br/>127 in.
• Dimensions - Lateral frame clearance, opener to opener: 15 in. (38.1 mm) for 7.5-in (19.1 cm) models 20 in. (50.8 mm) for 10-in (25.4 cm) models
• Dimensions - Overall length: ? 9.1 m<br/>? 29.9 ft
• Dimensions - Road clearance: > 17.8 cm<br/>> 7.0 in.
• Dimensions - Weight before ballast: Dual rank - 7.5-in. (19.1 cm) spacing: N530C - ? 23,000 lb. (10,400 kg); N536C - ? 27,200 lb. (12,300 kg); N540C - ? 29,800 lb. (13,500 kg); N542C - ? 31,000 lb. (14,100 kg)<br/>Dual rank - 10-in. (25.4 cm) spacing: N530C - ? 20,400 lb. (9300 kg); N536C - ? 24,300 lb. (11,000 kg); N540C - ? 26,400 lb. (12,000 kg); N542C - ? 27,300 lb. (12,400 kg)<br/>Single rank - 15-in. (38.1 cm) spacing: N530C - ? 14,700 lb. (6700 kg); N536C - ? 16,900 lb. (7700 kg); N540C - ? 18,500 lb. (8400 kg); N542C - ? 19,200 lb. (8700 kg)
• Equipment compatibility (at 1.5 in. seeding depth and 8 mph) - Tractor drawbar power required, 10-in (25.4 cm) models: N530C - ? 179 kW (240 hp)<br/>N536C - ? 207 kW (278 hp)<br/>N540C - ? 225 kW (301 hp)<br/>N542C - ? 232 kW (311 hp)
• Equipment compatibility (at 1.5 in. seeding depth and 8 mph) - Tractor drawbar power required, 15-in (38.1 cm) models: N530C - ? 137 kW (183 hp)<br/>N536C - ? 154 kW (206 hp)<br/>N540C - ? 166 kW (222 hp)<br/>N542C - ? 172 kW (231 hp)
• Equipment compatibility (at 1.5 in. seeding depth and 8 mph) - Tractor drawbar power required, 7.5-in (19.1 cm) models: N530C - ? 219 kW (293 hp)<br/>N536C - ? 254 kW (341 hp)<br/>N540C - ? 278 kW (373 hp)<br/>N542C - ? 292 kW (392 hp)
• Key Specs - Number of ranks: Single; Dual
• Key Specs - Openers: Style<br/>No-till<br/>Rank lock-up<br/>Individual<br/>Diameter<br/>45.7 cm<br/>18 in.<br/>Down pressure<br/>74.8-181.4 kg/opener (165-400 lb)<br/>Dual rank - 7.5-in. (19.1 cm) spacing: N530C 48, N536C 58, N540C 64, N542C 68<br/>Dual rank - 10-in. (25.4 cm) spacing: N530C 36, N536C 44, N540C 48, N542C 50<br/>Single rank - 15-in. (38.1 cm) spacing: N530C 24, N536C 28, N540C 32, N542C 34
• Key Specs - Spacing: Dual rank: 7.5-in. (19.1 cm) spacing; 10-in. (25.4 cm) spacing<br/>Single rank: 15-in. (38.1 cm) spacing
• Key Specs - Working widths: N530C - 9.15 m (30 ft)<br/>N536C - 11 m (36 ft)<br/>N540C - 12.2 m (40 ft)<br/>N542C - 13 m (42 ft)
• Openers - Depth control: Description<br/>Gauge wheel (smooth sided or spoked)<br/>Gauge wheel size<br/>4.5 in. x 16 in. or 3 in. x 16 in.<br/>11.4x40.6 cm or 7.6 cm x 40.6 cm<br/>Range<br/>0.5-3.5 in. (1.3-8.9 cm)<br/>Increments<br/>0.25 in. (0.64 cm)<br/>
• Openers - Disk: Diameter<br/>45.7 cm<br/>18 in.<br/>Angle<br/>7-degree angle<br/>45.7 cm (18-in.) disk blade at 7-degree angle
• Openers - Down pressure: Style<br/>Hydraulic rank<br/><br/>74.8-181.4 kg/opener (165-400 lb)
• Openers - Furrow closing: Description<br/>Cast wheel at 15-degree vertical angle<br/>Serrated closing wheel at 15-degree vertical angle<br/>Size<br/>Cast wheel: 2.54x30.5 cm<br/>1x12 in.<br/>Serrated closing wheel: 302 mm<br/>11.9 in.<br/>Material<br/>Cast<br/>Down force<br/>Down-pressure from 11.8-19.5 kg<br/>26-43 lb<br/>Serrated or smooth cast closing wheel
• Openers - In-Furrow press wheel: Material<br/>Rubber<br/>Packing force<br/>Adjustable down-pressure from 2.3 to 20.4 kg<br/>5 to 45 lb<br/>2.54x25.4 cm<br/>1x10 in.
• Openers - Rank lock-up: Individual
• Openers - Style: No-till
• Seed Metering - Crops: Barley, oats, rice, sorghum, soybean, wheat
• Seed Metering - Description: Central volumetric metering
• Seed Metering - Max Volumetric Seeding Rates - Barley: ? 1,000,000 seeds per acre (2,470,000 seeds per hectare)
• Seed Metering - Max Volumetric Seeding Rates - Milo/Sorghum: ? 100,000 seeds per acre (247,000 seeds per hectare)
• Seed Metering - Max Volumetric Seeding Rates - Oats: ? 2,500,000 seeds per acre (6,180,000 seeds per hectare)
• Seed Metering - Max Volumetric Seeding Rates - Rice: ? 1,700,000 seeds per acre (4,200,000 seeds per hectare)
• Seed Metering - Max Volumetric Seeding Rates - Soybean: ? 250,000 seeds per acre (618,000 seeds per hectare)
• Seed Metering - Max Volumetric Seeding Rates - Wheat: ? 2,970,000 seeds per acre (7,300,000 seeds per hectare)
• Seed Metering - Metering Drive Type: Electric
• Seed Storage - Blower: 45 cm (17.7 in.) diameter impeller
• Seed Storage - Blower drive type: Hydraulic
• Seed Storage - Distribution hose size: 1 in. (2.54 cm) ID for 38.1 cm (15 in.) row spacing<br/>1.13 in. (3.13 cm) ID primaries with 1 in. (2.54 cm) ID secondaries for 19.1 and 25.4 cm (7.5 and 10 in.) row spacings
• Seed Storage - Tank Description: Central, non-pressurized polyethylene tank
• Seed Storage - Tank Fill Screen: Optional; one per tank opening
• Seed Storage - Tank Scales: Optional; provides summed commodity weight
• Seed Storage - Total Tank Capacity: N530C and N536C - 3500 L (100 bu)<br/>N540C and N542C - 4200 L (120 bu)
• Seed Storage - Type: Pneumatic
• Sizes - Number of ranks: Single; Dual
• Sizes - Spacing: Dual rank: 7.5-in. (19.1 cm) spacing; 10-in. (25.4 cm) spacing<br/>Single rank: 15-in. (38.1 cm) spacing
• Sizes - Working widths: N530C - 9.15 m (30 ft)<br/>N536C - 11 m (36 ft)<br/>N540C - 12.2 m (40 ft)<br/>N542C - 13 m (42 ft)
• Tires - Centerframe tires and wheels: N530C and N536C - (4) 33x15.5-16 on front, (4) 500/40R16 on rear<br/>N540C and N542C - (4) 500/40R16 on front, (4) 500/40R16 on rear
• Tires - Mainframe bolt pattern: 8 bolts
• Tires - Mainframe standard: M Standard: 4 33x15.5/16<br/>4 33x15.5/16<br/>W Standard: 4 31x13.5/15<br/>HF Mainframe: 4 33x15.5/16<br/>HF Wing: 8 33x15.5/16<br/>Premium Main: 30/36 ft. 4 33x15.5/16 Front 4 500/40R16 Rear<br/>40/42 4 500/40R16 F 4 500/40R16 R<br/>Premium Wing: 8 33x15.5/16
• Tires - Wheel spacing, center frame: Width of duals, center to center<br/>N530C and N536C - 258.1 cm (101.6 in.)<br/>N540C and N542C - 322.1 cm (126.8 in.)<br/>Width outside to outside of dual pair, front - largest tire option<br/>130.8 cm<br/>51.5 in.<br/>Width outside to outside of dual pair, rear<br/>130.8 cm<br/>51.5 in.<br/>Tire width, front - largest tire option<br/>N530C and N536C - 40.6 cm (16 in.)<br/>N540C and N542C - 50.8 cm (20 in.)<br/>Tire width, rear - largest tire option<br/>50.8 cm<br/>20 in.<br/>
• Tires - Wing tires and wheels: (8) 33x15.5-16
• Tires - Wings bolt pattern: 8 bolts
• Tires - Wings standard: (4) 31x13.5-15 NHS
• Tractor requirements - Hydraulic Power Beyond: Required for in-cab opener downforce and electric power generation
• Tractor requirements - Minimum electrical capacity: 48 A at 12 VDC
• Tractor requirements - Minimum hydraulic capacity: N530C - 81 L/min (21.4 gpm) at 19 cm (7.5 in.); 73.8 L/min (19.5 gpm) at 25.4 cm (10 in.); 61.7 L/min (16.3 gpm) at 38.1 cm (15 in.)<br/>N536C - 98.8 L/min (18.7 gpm) at 19 cm (7.5 in.); 80.6 L/min (21.3 gpm) at 25.4 cm (10 in.); 70.8 L/min (16.3 gpm) at 38.1 cm (15 in.)<br/>N540C - 108.6 L/min (28.7 gpm) at 19 cm (7.5 in.); 81 L/min (21.4 gpm) at 25.4 cm (10 in.); 75.7 L/min (20.0 gpm) at 38.1 cm (15 in.)<br/>N540C - 115.8 L/min (30.6 gpm) at 19 cm (7.5 in.); 90.1 L/min (23.8 gpm) at 25.4 cm (10 in.); 79.1 L/min (20.9 gpm) at 38.1 cm (15 in.)
• Tractor requirements - Minimum number of SCV's: Four - one  fold, one opener raise/lower, one seed distribution blower, and one for downforce<br/>Note: tractors equipped with power beyond only require three SCV's

Features

• Spacing: &lt;span&gt;7.5 in., 10 in., 15 in., 20 in.&lt;/span&gt;
• Opener: &lt;span&gt;ProSeries&lt;/span&gt;
• Capacity: &lt;span&gt;100 bu., 120 bu.&lt;/span&gt;
• Working Width: 36ft.

Copy Set