John Deere D120 Loader
| Make | John Deere |
| Model | D120 |
| Type | Front End Loaders for Tractors |
Your Preferred Location
Description
- Compatible with the 1023E and 1025R
- Parkable
- 570 pounds (259 kg) of lift capacity
- 71.2 in. (1,809 mm) of lift height
Models
Easily remove and mount loader to and from the tractor without tools
Parking mounting system
The parking mounting system on the D120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the 305 Loaders, the D120’s parking stands are kept in the torque tube for easy accessibility. To park the loader, simply install parking stands, remove pivot pins from the mast, disconnect the hydraulic hoses, and back out the tractor.
Easy removal and mounting
Mount to and from tractor without tools
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Specifications
- Key Specs - Boom breakout force: Measured at pivot (Y)<br/>806<br/>1808 lb<br/>Measured at 500 mm ahead of pivot (Z)<br/>552 kg<br/>1238 lb<br/>
- Key Specs - Bucket rollback force capacity: At ground-level line (ZZ)<br/>707 kg<br/>1559 lb<br/>
- Key Specs - Clearance at full height - bucket dumped (C): 1371 mm<br/>54 in.
- Key Specs - Dump angle, degrees (E): -40.1 degree (angle)
- Key Specs - Lift capacity at full height: Measured at pivot (U)<br/>375 kg<br/>825 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>259 kg<br/>570 lb<br/>
- Key Specs - Maximum lift height (A): 1809 mm<br/>71.2 in.
- Key Specs - Rollback angle, degrees (G): 31.2 degree (angle)
- Loader - Base weight: 220.5 kg
- Loader - Boom breakout force: Measured at pivot (Y)<br/>806 kg<br/>1808 lb<br/>Measured at 500 mm ahead of pivot (Z)<br/>552 kg<br/>1238 lb<br/>
- Loader - Bucket angle: Dump angle, degrees (E)<br/>-40.1 degree (angle)<br/>Rollback angle, degrees (G)<br/>31.2 degree (angle)<br/>Dump angle, ground<br/>-114 degree (angle)<br/>
- Loader - Bucket rollback force capacity: At maximum height (VV)<br/>593 kg<br/>1330 lb<br/>At 59-in. (1500-mm) lift height (XX)<br/>711 kg<br/>1568 lb<br/>At ground-level line (ZZ)<br/>707 kg<br/>1559 lb<br/>
- Loader - Bucket used: Pin on Materials 1250 mm<br/>49 in.
- Loader - Bucket weight: 53 kg<br/>117 lb
- Loader - Cycle times: Loader raise, seconds<br/>4 seconds<br/>Loader lower, seconds<br/>2.5 seconds<br/>Bucket dump, seconds<br/>5.7 (without regen)/2.2 (with regen) seconds<br/>Bucket rollback, seconds<br/>3.5 seconds<br/>
- Loader - Digging depth (H): -101 mm<br/>-4 in.
- Loader - Dimensions: Maximum lift height (A)<br/>1809 mm<br/>71.2 in.<br/>At full height - bucket level(B)<br/>1653 mm<br/>65.1 in.<br/>At full height - bucket dumped (C)<br/>1371 mm<br/>54 in.<br/>
- Loader - Lift capacity at 59 in. (1500 mm): Measured at pivot (W)<br/>429 kg<br/>944 lb<br/>Measured at 500 mm ahead of pivot (X)<br/>309 kg<br/>680 lb<br/>
- Loader - Lift capacity at full height: Measured at pivot (U)<br/>375 kg<br/>825 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>259 kg<br/>570 lb<br/>
- Loader - Overall length (I+F), ft (m): 2.6 m<br/>8.6 ft
- Loader - Reach: At maximum height (D)<br/>571 mm<br/>22.5 in.<br/>At ground level - bucket level (F)<br/>1176 mm<br/>46.3 in.<br/>
- Tractor - Front tire: 18x8.5-10 4PR R4
- Tractor - Model: 1023E/1026R Tractor
- Tractor - Pump capacity: 3.5 gpm
- Tractor - Rated pressure: 1987 psi
- Tractor - Rear tire: 26x12.00-12 4PR R4
- Tractor - Wheelbase: 1450 mm<br/>57 in.
Features
- Lift Capacity: 570 lbs (259 kg)
- Lift Height: 71.2 in. (1.809 m)
Copy Set
Easily remove and mount loader to and from the tractor without tools
Parking mounting system
The parking mounting system on the D120 Loader is designed for easy removal and mounting to and from the tractor without tools.
Similar to that of the 305 Loaders, the D120’s parking stands are kept in the torque tube for easy accessibility. To park the loader, simply install parking stands, remove pivot pins from the mast, disconnect the hydraulic hoses, and back out the tractor.
Easy removal and mounting
Mount to and from tractor without tools
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
The unique offset head design eliminates cross-pins and cotter pins to retain the pin.
A nut ensures the pins remain in position.
A lubrication groove provides a path for lubrication.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.