John Deere 300R Loader
| Make | John Deere |
| Model | 300R |
| Type | Front End Loaders for Tractors |
Your Preferred Location
Description
- Compatible with 3R Series Tractors
- Quik-Park™ mounting system for efficient attachment and removal
- Easy maintenance for increased uptime
- 999 pounds (453 kg) lift capacity
Models
Quik-Park™ loader mounting system
Quik-Park loader mounting system
Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
End-of-pin lubrication means easy maintenance
Close up of grease fitting
Pivot point grease fitting locations
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. There is no more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.
Specifications
- Key Specs - Boom breakout force: Measured at pivot (Y)<br/>1295 kg<br/>2855 lb<br/>Measured at 500 mm ahead of pivot (Z)<br/>922 kg<br/>2032 lb<br/>
- Key Specs - Bucket rollback force capacity: At ground-level line (ZZ)<br/>1188 kg<br/>2619 lb<br/>
- Key Specs - Clearance at full height - bucket dumped (C): 1743 mm<br/>69 in.
- Key Specs - Dump angle, degrees (E): 43 degree (angle)
- Key Specs - Lift capacity at full height: Measured at pivot (U)<br/>617 kg<br/>1360 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>453 kg<br/>999 lb<br/>
- Key Specs - Maximum lift height (A): 2284 mm<br/>90 in.
- Key Specs - Rollback angle, degrees (G): 25 degree (angle)
- Loader - Base weight: 257.21 kg
- Loader - Boom breakout force: Measured at pivot (Y)<br/>1295 kg<br/>2855 lb<br/>Measured at 500 mm ahead of pivot (Z)<br/>922 kg<br/>2032 lb<br/>
- Loader - Bucket angle: Dump angle, degrees (E)<br/>43 degree (angle)<br/>Rollback angle, degrees (G)<br/>25 degree (angle)<br/>
- Loader - Bucket rollback force capacity: At maximum height (VV)<br/>1205 kg<br/>2657 lb<br/>At 59-in. (1500-mm) lift height (XX)<br/>1518 kg<br/>3347 lb<br/>At ground-level line (ZZ)<br/>1188 kg<br/>2619 lb<br/>
- Loader - Bucket weight: 93.8 kg<br/>207 lb
- Loader - Cycle times: Loader raise, seconds<br/>2.76 seconds<br/>Loader lower, seconds<br/>1.69 seconds<br/>Bucket dump, seconds<br/>2.91 seconds<br/>Bucket rollback, seconds<br/>1.72 seconds<br/>
- Loader - Digging depth (H): 76 mm<br/>2.9 in.
- Loader - Dimensions: Maximum lift height (A)<br/>2284 mm<br/>90 in.<br/>At full height - bucket level(B)<br/>2123 mm<br/>83.5 in.<br/>At full height - bucket dumped (C)<br/>1743 mm<br/>69 in.<br/>
- Loader - Lift capacity at 59 in. (1500 mm): Measured at pivot (W)<br/>771 kg<br/>1700 lb<br/>Measured at 500 mm ahead of pivot (X)<br/>595 kg<br/>1312 lb<br/>
- Loader - Lift capacity at full height: Measured at pivot (U)<br/>617 kg<br/>1360 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>453 kg<br/>999 lb<br/>
- Loader - Overall length (I+F), ft (m): 3.122 m<br/>10.24 ft
- Loader - Reach: At maximum height (D)<br/>773 mm<br/>30.4 in.<br/>At ground level - bucket level (F)<br/>1381 mm<br/>54.4 in.<br/>
- Tractor - Front tire: 7.00-14 6PR R1
- Tractor - Model: 3120/3320/3520/3720/3033R/3039R/3046R
- Tractor - Pump capacity: 8.6 gpm
- Tractor - Rated pressure: 2500 psi
- Tractor - Rear tire: 11.2-24 6PR R1
- Tractor - Wheelbase: 1727 mm<br/>68 in.
Features
- Lift Capacity: 999 lbs (453 kg)
- Lift Height: 90 in. (2.284 m)
Copy Set
Quik-Park™ loader mounting system
Quik-Park loader mounting system
Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.
The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.
The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.
End-of-pin lubrication means easy maintenance
Close up of grease fitting
Pivot point grease fitting locations
All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. There is no more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.