John Deere 220R Loader
| Make | John Deere |
| Model | 220R |
| Type | Front End Loaders for Tractors |
Your Preferred Location
Description
- Compatible with 2032R and 2038R tractors
- Quik-Park™ mounting system for easy on, easy off in minutes
- Optional single-point hydraulic coupler connects hydraulics with pull of a lever
- Quik-Change™ Bucket System for fast and easy attachment changeovers
- Mechanical Self-Leveling (MSL) Loader option with 1,377 lb (626 kg) lift capacity
Models
Quik-Park™ loader mounting system
Quik-Park loader mounting system
Quik-Park loader mounting system
The 220R loader is designed to easily attach to and detach from the tractor without tools.
The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
The pivot pins are made with a unique offset head design to eliminate cross-pins and cotter pins to retain the pin. Instead, the pin is held in place with a nut, which is very simple to install as it eliminates any alignment issues. The offset head of the pin prevents rotation of the pin and reduces pin wear.
A lubrication groove in the cylinder pin provides a path for grease to ensure proper lubrication of the cylinder pin and long life.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader
Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence. With the MSL loader, you will notice:
- Loader implement will maintain position wherever the loader is lifted to
- Increased lift capacities
- Reduction of material lost during operation
- Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement
This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.
Quik-Change attachment carrier
Quik-Change attachment
CUT carrier (Quik-Change) on 220R Loader and 1450-mm (57-in.) standard bucket
The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.
This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.
Specifications
- Key Specs - Boom breakout force: Measured at pivot (Y)<br/>886 kgf<br/>1949 lbf<br/>Measured at 500 mm ahead of pivot (Z)<br/>618 kgf<br/>1360 lbf<br/>
- Key Specs - Bucket rollback force capacity: At ground-level line (ZZ)<br/>972 kgf<br/>2138 lbf<br/>
- Key Specs - Clearance at full height - bucket dumped (C): 1667 mm<br/>66 in.
- Key Specs - Dump angle, degrees (E): 36 degree (angle)
- Key Specs - Lift capacity at full height: Measured at pivot (U)<br/>509 kg<br/>1120 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>365 kg<br/>803 lb<br/>
- Key Specs - Maximum lift height (A): 2160 mm<br/>85 in.
- Key Specs - Rollback angle, degrees (G): 34 degree (angle)
- Loader - Base weight: 330.9 kg<br/>729 lb
- Loader - Boom breakout force: Measured at pivot (Y)<br/>886 kgf<br/>1949 lbf<br/>Measured at 500 mm ahead of pivot (Z)<br/>618 kgf<br/>1360 lbf<br/>
- Loader - Bucket angle: Dump angle, degrees (E)<br/>36 degree (angle)<br/>Rollback angle, degrees (G)<br/>34 degree (angle)<br/>Dump angle, ground<br/>115 degree (angle)<br/>
- Loader - Bucket rollback force capacity: At maximum height (VV)<br/>1044 kgf<br/>2297 lbf<br/>At 59-in. (1500-mm) lift height (XX)<br/>1302 kgf<br/>2864 lbf<br/>At ground-level line (ZZ)<br/>972 kgf<br/>2138 lbf<br/>
- Loader - Bucket used: 1450 mm<br/>57 in.
- Loader - Bucket weight: 88 kg<br/>194 lb
- Loader - Cycle times: Loader raise, seconds<br/>3.19 seconds<br/>Loader lower, seconds<br/>1.94 seconds<br/>Bucket dump, seconds<br/>4.76 seconds<br/>Bucket rollback, seconds<br/>2.91 seconds<br/>
- Loader - Digging depth (H): 149 mm<br/>6 in.
- Loader - Dimensions: Maximum lift height (A)<br/>2160 mm<br/>85 in.<br/>At full height - bucket level(B)<br/>1999 mm<br/>79 in.<br/>At full height - bucket dumped (C)<br/>1667 mm<br/>66 in.<br/>
- Loader - Leveling configuration: Non-Self Leveling
- Loader - Lift capacity at 59 in. (1500 mm): Measured at pivot (W)<br/>589 kg<br/>1296 lb<br/>Measured at 500 mm ahead of pivot (X)<br/>445 kg<br/>979 lb<br/>
- Loader - Lift capacity at full height: Measured at pivot (U)<br/>509 kg<br/>1120 lb<br/>Measured at 500 mm ahead of pivot (V)<br/>365 kg<br/>803 lb<br/>
- Loader - Overall length (I+F), ft (m): 3076 mm<br/>121 in.
- Loader - Reach: At maximum height (D)<br/>756 mm<br/>30 in.<br/>At ground level - bucket level (F)<br/>1351 mm<br/>51 in.<br/>
- Tractor - Front tire: 23x8.50-14 4PR R4
- Tractor - Model: 2032R, 2038R
- Tractor - Pump capacity: 20.2 L/min<br/>5.3 gpm
- Tractor - Rated pressure: 17.23 MPa<br/>2499 psi
- Tractor - Rear tire: 14-17.5 6PR R4
- Tractor - Wheelbase: 1725 mm<br/>68 in.
Features
- Lift Height: 85 in. (2.160 mm)
- Lift Capacity: 803 lbs (365 kg)
Copy Set
Quik-Park™ loader mounting system
Quik-Park loader mounting system
Quik-Park loader mounting system
The 220R loader is designed to easily attach to and detach from the tractor without tools.
The parking stand is attached to the mast and lowers into position by moving the joystick to the raise position once the latches are opened to allow the loader to move to the park position.
End-of-pin lubrication on cylinder and pivot pins allows easy access for servicing grease points
Pivot pin
The pivot pins are made with a unique offset head design to eliminate cross-pins and cotter pins to retain the pin. Instead, the pin is held in place with a nut, which is very simple to install as it eliminates any alignment issues. The offset head of the pin prevents rotation of the pin and reduces pin wear.
A lubrication groove in the cylinder pin provides a path for grease to ensure proper lubrication of the cylinder pin and long life.
End-of-pin lubrication allows easy access for servicing grease points, which are visible from the side of the loader.
Operate with ease and efficiency using the optional field-installed mechanical self-leveling (MSL) loader
Whether the operator is new or experienced to loader operations, it requires skill to maintain an even load and reduce the amount of material lost. With the MSL loader offering for 1 Family, 2 Family, 3D, and 3E Tractors, anyone can operate their loader with ease and confidence. With the MSL loader, you will notice:
- Loader implement will maintain position wherever the loader is lifted to
- Increased lift capacities
- Reduction of material lost during operation
- Easy visibility of the bucket level indicator on the right-hand side of the loader boom to help determine the position of the front implement
This loader is the first of its kind in North America for Compact Utility Tractors and can make any loader task easier and quicker to accomplish.
Quik-Change attachment carrier
Quik-Change attachment
CUT carrier (Quik-Change) on 220R Loader and 1450-mm (57-in.) standard bucket
The Quik-Change attachment carrier allows one person to quickly change attachments without the use of tools. Simply roll the attachment back with the boom slightly off the ground, remove the retaining pins, and then roll the attachment forward and lower to the ground. To connect to another attachment simply align the attachment carrier with the hooks of the attachment, raise the boom for the carrier to engage the hooks of the attachment and rollback the attachment carrier. Then install the retaining pins and the carrier is ready to work.
This provides a very effective means of changing attachments without having to purchase an option to facilitate changing attachments.