Frontier RC20 Series Rotary Cutters
All Rotary Cutters
Your Preferred Location
Features
-
Hitch Category: Cat. 1 & Cat.2
-
Working Width: 48 in. (121.9 cm)
-
PTO HP: 18 – 45 hp (13.4 – 33.6 kW)
Specifications
Blade holder - Diameter: |
567 mm 22.3 in. |
Blade holder - Type: |
Round pan-type |
Blades - Thickness: |
13 mm 0.5 in. |
Blades - Tip speed: |
66.5) m/s 13,090 fpm |
Blades - Type: |
Heat treated, suction |
Blades - Width: |
76 mm 3 in. |
Capacity - Cutting chamber depth: |
19 cm 7.5 in. |
Capacity - Cutting diameter: |
0-2.5 cm 0-1 in. |
Capacity - Cutting height: |
4-23 cm 1.5-9 in. |
Capacity - Cutting width: |
122 cm 48 in. |
Deck - Shape: |
Flat-open round back |
Deck - Thickness: |
11 gauge 3 mm 0.12 |
Deck - Type: |
Single |
Dimensions - Overall length: |
220 cm 87 in. |
Dimensions - Overall width: |
129 cm 51 in. |
Driveline - Type: |
Shear bolt or slip clutch |
Gear case - Horsepower: |
34 kW 45 hp |
Hitch - AutoHitch? compatible: |
Yes |
Hitch - Category: |
Cat. 1, adaptable to Cat. 2 |
Hitch - iMatch? compatible: |
Yes |
Hitch - Type: |
Lift-type |
Safety - Front deflector: |
Standard |
Safety - Markings: |
Standard |
Safety - Rear deflector: |
Standard |
Set-up time - Labor hours: |
1 |
Skirt - Thickness: |
11 gauge 3 mm 0.12 |
Tractor compatibility - PTO category: |
ASAE 3 |
Tractor compatibility - PTO horsepower: |
13-33 kW 18-45 hp |
Tractor compatibility - Tractor PTO: |
540 rpm |
Warranty - Gearbox: |
1 year |
Warranty - Time period: |
1 year |
Weight - Operating: |
232 kg 512 lb |
Wheels - Diameter laminated: |
381 mm 15 in. |
Wheels - Diameter rubber: |
381 mm 15 in. |
Wheels - Quantity: |
1 |
Wheels - Type: |
Solid rubber or laminated |
Wheels - Width laminated: |
95 mm 3.75 in. |
Wheels - Width rubber: |
95 mm 3.75 in. |
Reversible hitch accommodates many types of tractor hookups
Low hitching point accommodates various tractors
The lower hitching point on the RC20 Series Rotary Cutter accommodates a reversible front hitch for smaller or older tractors.
Puncture-resistant rear tires
Puncture resistant (laminated shown)
Choose a laminated or solid rubber rear tire for the RC20 Series Rotary Cutter. Both are puncture resistant.
The laminated tire is longer lasting and provides more support when working in sandy or lighter soil conditions.
Easy-to-maneuver deck
Provides easy maneuvering in tight areas
The round-back deck design on the RC20 Series Rotary Cutter enables easy maneuvering into tight corners and around trees, fences, and other hard-to-reach areas.
Balanced blade pan reduces vibrations
Statically balanced to reduce vibration
There is one standard blade pan for all four sizes of the RC20 Series Rotary Cutters. The blade pan is stamped instead of fabricated and is statically balanced to reduce vibration.
The blade bar is thicker for added durability.
iMatch™ hitch system provides quick and easy connections
Provides quick and easy connection
The iMatch hitch system converts a tractor's 3-point hitch to fixed hooks and attaching points for a super-quick connection (the iMatch hitch is sold separately).
Lower lip (Z-profile) increases durability and strength
Provides extra strength and durability
The RC20 Series Rotary Cutters have a lower lip (Z-profile), which extends from the skid shoes to where the apron opens up. This Z-profile increases the overall durability and strength of the rotary cutter.
Adjustable cutting height
Cutting heights of 3.8 cm to 22.9 cm (1.5 in. to 9 in.)
Adjusting the cutting height is easy. Along with adjusting a tractor's three-point linkage, simply move the support bar to the desired cutting height.
The RC20 Series Rotary Cutters go as low as 3.8 cm (1.5 in.) or as high as 22.9 cm (9 in.).
Deck deflectors offered in chain or rubber
Chain deflector shown
Rubber deflector shown
The front deck and deflector support are flush with the deck on the RC20 Series Rotary Cutters. This allows water and debris an unrestricted exit off the top of the deck.
These deflectors are available in:
- Rubber or chain on the front
- Metal or chain on the rear