| The heavy-duty concave back plate, with a formed upper edge, provides added rigidity and strength for trouble-free performance. |
| The iMatch Category 1 quick-attach hitch system is an innovative device that converts a 3-point hitch to fixed hooks and makes attaching implements an easy connection. |
| The BB Series Box Blade cutting edge ensures precise leveling and a fine finish. It is also reversible for twice the wear life. |
| Adjustments are easy on the BB20 and BB21 Series Box Blades. Simply remove the steel pin and raise or lower the scarifier to increase or decrease ground penetration. |
Landscape Equipment
| The iMatch system converts the tractor's 3-point hitch to fixed hooks and makes attaching implements a super-quick connection. |
| Notched blades with cast spools come standard with the Frontier™ DH10 Series. These notched blades aggressively cut and mulch soil. |
| Disk gangs are easily adjustable to match changing soil conditions. Use a more aggressive angle to tear up and penetrate rough and uneven soil. Reduce the angle for a smoother finish for final seedbed preparation. |
| The Frontier™ DH Series Disk Harrows have self-aligning, sealed bearings to keep dirt out for dependable, maintenance-free performance and longer life. |
| Frontier™ LP Series Land Planes are equipped with two reversible, double-beveled cutting edges. The reversible cutting edges enhance grading performance and extend wear life. |
| The LP1160 and LP1172 Land Plane models are compatible with 2000 to 4000 Series Tractors. The LP1184 and LP1196 Land Plane models are both compatible with 3000 to 5000 Series Tractors. |
| These standard-duty landscape rakes are compatible with tractors equipped with Category 1 3-point hitches and are also iMatch hitch. iMatch compatibility ensures a quick and efficient hookup. |
| A strong, tubular-steel frame supports an angled tine beam for superior performance. |
| Standard-duty landscaping rake models feature high-strength, formed tine beams constructed with a slotted, bolt-in mounting system. The spring steel tines are spaced at 2.5-cm (1-in.) intervals for exceptional performance in pick-up, grooming, and material distribution. This mounting ensures positive spacing and alignment over each tine. |
| The PHD0 Series Post Hole Digger has a rugged and dependable gearbox for a longer-lasting life. |
| The foldable hook-up stand allows operators to easily mount and dismount the post-hole digger from the tractor. The stand has several adjusting height options to accommodate the operator's needs. The stand is ideal for storing the post-hole digger safely and prolongs the implement's life by keeping it off the ground. |
| The auger position handle allows the operator to place the post-hole digger in the correct position before digging. The field conversion auger position handle kit can be installed on PHD300 and PHD400 Series Post-Hole Diggers. |
| The PHD0 Series Post-Hole Diggers have a strong safety shield surrounding the auger and PTO to provide extra protection and longer life. |
| The tough, tubular steel frame on Frontier™ RB Series Rear Blades is perfect for grading. Its full-radius moldboard more than handles landscaping needs. |
| All Frontier RB Series Rear Blade cutting edges are reversible, featuring bevels on both edges to give the blade twice the work life. |
| The turntable on the Frontier™ RB22, RB23, and RB24 Series Rear Blades allows a complete 360-degree turning radius for leveling perfection. Manually adjusting the offset, angle, and tilt allows the blade to adapt to a variety of conditions and provides added protection and leveling perfection. |
| End plates allow Frontier™ RB Series Rear Blades to hold more material while dragging it from place to place. This is ideal for leveling uneven terrain. Each of the field conversion kits are for a pair of end plates and prevent the blades from windrowing material when backfilling or leveling. |
| The iMatch quick-hitch system converts the tractor's 3-point hitch to fixed hooks for a super-quick connection. |
| The steel roller on all SP Series Soil Pulverizers are studded with 9.65-mm x 25.4-mm (0.38-in. x 1-in.) spikes that penetrate the toughest surfaces, breaking down clods and creating a fine finish. Add an optional second roller with two 36.3-kg (80-lb) compression springs for an even smoother finish. |
| The SP10 Series Soil Pulverizers have two 68-kg (150-lb) compression springs, and the SP20 Series Soil Pulverizers have two 72.6-kg (160-lb) compression springs to keep the roller in contact with the ground and force the spikes into the soil down to 25.4-mm (1-in.) deep. |
| The SP20 Series Soil Pulverizers feature a double set of 12.7-mm x 50.8-mm (0.5-in. x 2-in.) bar-type cutting teeth. Their staggered mounting slices the surface every 71.1 mm (2.8 in.) for superior soil preparation. The teeth are reversible for extra life. |
Frontier Box Blades |
Quick Look | ||||
Frontier Box Blades
|
|||||
Frontier Disk Harrows |
Quick Look | ||||
Frontier Disk Harrows
|
|||||
Frontier Land Planes |
Quick Look | ||||
Frontier Land Planes
|
|||||
Frontier Land Rakes |
Quick Look | ||||
Frontier Land Rakes
|
|||||
Frontier Post Hole Diggers |
Quick Look | ||||
Frontier Post Hole Diggers
|
|||||
Frontier Rear Blades |
Quick Look | ||||
Frontier Rear Blades
|
|||||
Frontier Soil Pulverizers |
Quick Look | ||||
Frontier Soil Pulverizers
|
|||||